upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/vision2.h

225 lines
5.6 KiB

/*
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* Configuration settings for the MX51-3Stack Freescale board.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MX51 /* in a mx51 */
#define CONFIG_SYS_TEXT_BASE 0x97800000
#include <asm/arch/imx-regs.h>
#define CONFIG_SYS_MX5_HCLK 24000000
#define CONFIG_SYS_MX5_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_BOARD_LATE_INIT
#ifndef MACH_TYPE_TTC_VISION2
#define MACH_TYPE_TTC_VISION2 2775
#endif
#define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
/*
* Hardware drivers
*/
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART3_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_HW_WATCHDOG
/*
* SPI Configs
* */
#define CONFIG_FSL_SF
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
/*
* Use gpio 4 pin 25 as chip select for SPI flash
* This corresponds to gpio 121
*/
#define CONFIG_SPI_FLASH_CS (1 | (121 << 8))
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_ENV_SPI_CS (1 | (121 << 8))
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_MAX_HZ 25000000
#define CONFIG_ENV_SPI_MODE SPI_MODE_0
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024)
#define CONFIG_ENV_SIZE (4 * 1024)
#define CONFIG_FSL_ENV_IN_SF
#define CONFIG_ENV_IS_IN_SPI_FLASH
/* PMIC Controller */
#define CONFIG_PMIC
#define CONFIG_PMIC_SPI
#define CONFIG_PMIC_FSL
#define CONFIG_FSL_PMIC_BUS 0
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 2500000
#define CONFIG_FSL_PMIC_MODE SPI_MODE_0
#define CONFIG_FSL_PMIC_BITLEN 32
#define CONFIG_RTC_MC13XXX
/*
* MMC Configs
*/
#define CONFIG_FSL_ESDHC
#ifdef CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000)
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_CMD_DATE
/*
* Eth Configs
*/
#define CONFIG_HAS_ETH1
#define CONFIG_MII
#define CONFIG_DISCOVER_PHY
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x1F
#define CONFIG_CMD_PING
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
***********************************************************/
#include <config_cmd_default.h>
#define CONFIG_CMD_SPI
#undef CONFIG_CMD_IMLS
#define CONFIG_BOOTDELAY 3
#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=0x90800000\0"
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "Vision II U-boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 64 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x90000000
#define CONFIG_SYS_MEMTEST_END 0x10000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "Vision II U-boot > "
/*
* Stack sizes
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_BOARD_EARLY_INIT_F
/* 166 MHz DDR RAM */
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x19239100
#define CONFIG_SYS_NO_FLASH
/*
* Framebuffer and LCD
*/
#define CONFIG_PREBOOT
#define CONFIG_VIDEO
#define CONFIG_VIDEO_MX5
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#endif /* __CONFIG_H */