upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
381 lines
9.9 KiB
381 lines
9.9 KiB
/*
|
|
* Allwinner SUNXI "glue layer"
|
|
*
|
|
* Copyright © 2015 Hans de Goede <hdegoede@redhat.com>
|
|
* Copyright © 2013 Jussi Kivilinna <jussi.kivilinna@iki.fi>
|
|
*
|
|
* Based on the sw_usb "Allwinner OTG Dual Role Controller" code.
|
|
* Copyright 2007-2012 (C) Allwinner Technology Co., Ltd.
|
|
* javen <javen@allwinnertech.com>
|
|
*
|
|
* Based on the DA8xx "glue layer" code.
|
|
* Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
|
|
* Copyright (C) 2005-2006 by Texas Instruments
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/usb_phy.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/root.h>
|
|
#include <linux/usb/musb.h>
|
|
#include "linux-compat.h"
|
|
#include "musb_core.h"
|
|
#include "musb_uboot.h"
|
|
|
|
/******************************************************************************
|
|
******************************************************************************
|
|
* From the Allwinner driver
|
|
******************************************************************************
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
* From include/sunxi_usb_bsp.h
|
|
******************************************************************************/
|
|
|
|
/* reg offsets */
|
|
#define USBC_REG_o_ISCR 0x0400
|
|
#define USBC_REG_o_PHYCTL 0x0404
|
|
#define USBC_REG_o_PHYBIST 0x0408
|
|
#define USBC_REG_o_PHYTUNE 0x040c
|
|
|
|
#define USBC_REG_o_VEND0 0x0043
|
|
|
|
/* Interface Status and Control */
|
|
#define USBC_BP_ISCR_VBUS_VALID_FROM_DATA 30
|
|
#define USBC_BP_ISCR_VBUS_VALID_FROM_VBUS 29
|
|
#define USBC_BP_ISCR_EXT_ID_STATUS 28
|
|
#define USBC_BP_ISCR_EXT_DM_STATUS 27
|
|
#define USBC_BP_ISCR_EXT_DP_STATUS 26
|
|
#define USBC_BP_ISCR_MERGED_VBUS_STATUS 25
|
|
#define USBC_BP_ISCR_MERGED_ID_STATUS 24
|
|
|
|
#define USBC_BP_ISCR_ID_PULLUP_EN 17
|
|
#define USBC_BP_ISCR_DPDM_PULLUP_EN 16
|
|
#define USBC_BP_ISCR_FORCE_ID 14
|
|
#define USBC_BP_ISCR_FORCE_VBUS_VALID 12
|
|
#define USBC_BP_ISCR_VBUS_VALID_SRC 10
|
|
|
|
#define USBC_BP_ISCR_HOSC_EN 7
|
|
#define USBC_BP_ISCR_VBUS_CHANGE_DETECT 6
|
|
#define USBC_BP_ISCR_ID_CHANGE_DETECT 5
|
|
#define USBC_BP_ISCR_DPDM_CHANGE_DETECT 4
|
|
#define USBC_BP_ISCR_IRQ_ENABLE 3
|
|
#define USBC_BP_ISCR_VBUS_CHANGE_DETECT_EN 2
|
|
#define USBC_BP_ISCR_ID_CHANGE_DETECT_EN 1
|
|
#define USBC_BP_ISCR_DPDM_CHANGE_DETECT_EN 0
|
|
|
|
/******************************************************************************
|
|
* From usbc/usbc.c
|
|
******************************************************************************/
|
|
|
|
static u32 USBC_WakeUp_ClearChangeDetect(u32 reg_val)
|
|
{
|
|
u32 temp = reg_val;
|
|
|
|
temp &= ~(1 << USBC_BP_ISCR_VBUS_CHANGE_DETECT);
|
|
temp &= ~(1 << USBC_BP_ISCR_ID_CHANGE_DETECT);
|
|
temp &= ~(1 << USBC_BP_ISCR_DPDM_CHANGE_DETECT);
|
|
|
|
return temp;
|
|
}
|
|
|
|
static void USBC_EnableIdPullUp(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val |= (1 << USBC_BP_ISCR_ID_PULLUP_EN);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_EnableDpDmPullUp(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val |= (1 << USBC_BP_ISCR_DPDM_PULLUP_EN);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_ForceIdToLow(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_ID);
|
|
reg_val |= (0x02 << USBC_BP_ISCR_FORCE_ID);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_ForceIdToHigh(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_ID);
|
|
reg_val |= (0x03 << USBC_BP_ISCR_FORCE_ID);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_ForceVbusValidToLow(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID);
|
|
reg_val |= (0x02 << USBC_BP_ISCR_FORCE_VBUS_VALID);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_ForceVbusValidToHigh(__iomem void *base)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = musb_readl(base, USBC_REG_o_ISCR);
|
|
reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID);
|
|
reg_val |= (0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID);
|
|
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
|
|
musb_writel(base, USBC_REG_o_ISCR, reg_val);
|
|
}
|
|
|
|
static void USBC_ConfigFIFO_Base(void)
|
|
{
|
|
u32 reg_value;
|
|
|
|
/* config usb fifo, 8kb mode */
|
|
reg_value = readl(SUNXI_SRAMC_BASE + 0x04);
|
|
reg_value &= ~(0x03 << 0);
|
|
reg_value |= (1 << 0);
|
|
writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Needed for the DFU polling magic
|
|
******************************************************************************/
|
|
|
|
static u8 last_int_usb;
|
|
|
|
bool dfu_usb_get_reset(void)
|
|
{
|
|
return !!(last_int_usb & MUSB_INTR_RESET);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* MUSB Glue code
|
|
******************************************************************************/
|
|
|
|
static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
|
|
{
|
|
struct musb *musb = __hci;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
|
|
/* read and flush interrupts */
|
|
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
|
|
last_int_usb = musb->int_usb;
|
|
if (musb->int_usb)
|
|
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
|
|
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
|
|
if (musb->int_tx)
|
|
musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
|
|
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
|
|
if (musb->int_rx)
|
|
musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
|
|
|
|
if (musb->int_usb || musb->int_tx || musb->int_rx)
|
|
retval |= musb_interrupt(musb);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* musb_core does not call enable / disable in a balanced manner <sigh> */
|
|
static bool enabled = false;
|
|
|
|
static int sunxi_musb_enable(struct musb *musb)
|
|
{
|
|
int ret;
|
|
|
|
pr_debug("%s():\n", __func__);
|
|
|
|
musb_ep_select(musb->mregs, 0);
|
|
musb_writeb(musb->mregs, MUSB_FADDR, 0);
|
|
|
|
if (enabled)
|
|
return 0;
|
|
|
|
/* select PIO mode */
|
|
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
|
|
|
|
if (is_host_enabled(musb)) {
|
|
ret = sunxi_usb_phy_vbus_detect(0);
|
|
if (ret == 1) {
|
|
printf("A charger is plugged into the OTG: ");
|
|
return -ENODEV;
|
|
}
|
|
ret = sunxi_usb_phy_id_detect(0);
|
|
if (ret == 1) {
|
|
printf("No host cable detected: ");
|
|
return -ENODEV;
|
|
}
|
|
sunxi_usb_phy_power_on(0); /* port power on */
|
|
}
|
|
|
|
USBC_ForceVbusValidToHigh(musb->mregs);
|
|
|
|
enabled = true;
|
|
return 0;
|
|
}
|
|
|
|
static void sunxi_musb_disable(struct musb *musb)
|
|
{
|
|
pr_debug("%s():\n", __func__);
|
|
|
|
if (!enabled)
|
|
return;
|
|
|
|
if (is_host_enabled(musb))
|
|
sunxi_usb_phy_power_off(0); /* port power off */
|
|
|
|
USBC_ForceVbusValidToLow(musb->mregs);
|
|
mdelay(200); /* Wait for the current session to timeout */
|
|
|
|
enabled = false;
|
|
}
|
|
|
|
static int sunxi_musb_init(struct musb *musb)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
pr_debug("%s():\n", __func__);
|
|
|
|
musb->isr = sunxi_musb_interrupt;
|
|
|
|
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
|
|
#ifdef CONFIG_SUNXI_GEN_SUN6I
|
|
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
|
|
#endif
|
|
sunxi_usb_phy_init(0);
|
|
|
|
USBC_ConfigFIFO_Base();
|
|
USBC_EnableDpDmPullUp(musb->mregs);
|
|
USBC_EnableIdPullUp(musb->mregs);
|
|
|
|
if (is_host_enabled(musb)) {
|
|
/* Host mode */
|
|
USBC_ForceIdToLow(musb->mregs);
|
|
} else {
|
|
/* Peripheral mode */
|
|
USBC_ForceIdToHigh(musb->mregs);
|
|
}
|
|
USBC_ForceVbusValidToHigh(musb->mregs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops sunxi_musb_ops = {
|
|
.init = sunxi_musb_init,
|
|
.enable = sunxi_musb_enable,
|
|
.disable = sunxi_musb_disable,
|
|
};
|
|
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = 1,
|
|
.dyn_fifo = 1,
|
|
.num_eps = 6,
|
|
.ram_bits = 11,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data musb_plat = {
|
|
#if defined(CONFIG_USB_MUSB_HOST)
|
|
.mode = MUSB_HOST,
|
|
#else
|
|
.mode = MUSB_PERIPHERAL,
|
|
#endif
|
|
.config = &musb_config,
|
|
.power = 250,
|
|
.platform_ops = &sunxi_musb_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_USB_MUSB_HOST
|
|
static int musb_usb_remove(struct udevice *dev);
|
|
|
|
static int musb_usb_probe(struct udevice *dev)
|
|
{
|
|
struct musb_host_data *host = dev_get_priv(dev);
|
|
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
|
|
int ret;
|
|
|
|
priv->desc_before_addr = true;
|
|
|
|
host->host = musb_init_controller(&musb_plat, NULL,
|
|
(void *)SUNXI_USB0_BASE);
|
|
if (!host->host)
|
|
return -EIO;
|
|
|
|
ret = musb_lowlevel_init(host);
|
|
if (ret == 0)
|
|
printf("MUSB OTG\n");
|
|
else
|
|
musb_usb_remove(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int musb_usb_remove(struct udevice *dev)
|
|
{
|
|
struct musb_host_data *host = dev_get_priv(dev);
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
musb_stop(host->host);
|
|
|
|
sunxi_usb_phy_exit(0);
|
|
#ifdef CONFIG_SUNXI_GEN_SUN6I
|
|
clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
|
|
#endif
|
|
clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
|
|
|
|
free(host->host);
|
|
host->host = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(usb_musb) = {
|
|
.name = "sunxi-musb",
|
|
.id = UCLASS_USB,
|
|
.probe = musb_usb_probe,
|
|
.remove = musb_usb_remove,
|
|
.ops = &musb_usb_ops,
|
|
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct musb_host_data),
|
|
};
|
|
#endif
|
|
|
|
void sunxi_musb_board_init(void)
|
|
{
|
|
#ifdef CONFIG_USB_MUSB_HOST
|
|
struct udevice *dev;
|
|
|
|
/*
|
|
* Bind the driver directly for now as musb linux kernel support is
|
|
* still pending upstream so our dts files do not have the necessary
|
|
* nodes yet. TODO: Remove this as soon as the dts nodes are in place
|
|
* and bind by compatible instead.
|
|
*/
|
|
device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
|
|
#else
|
|
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
|
|
#endif
|
|
}
|
|
|