upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
190 lines
5.3 KiB
190 lines
5.3 KiB
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
|
|
* esd electronic system design gmbh <www.esd.eu>
|
|
*
|
|
* Configuation settings for the esd MEESC board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* Common stuff */
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq */
|
|
#define CONFIG_MEESC 1 /* Board is esd MEESC */
|
|
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
|
|
#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
|
|
#define CONFIG_ENV_OVERWRITE 1 /* necessary on prototypes */
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
|
|
#define CONFIG_PREBOOT /* enable preboot variable */
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_SKIP_RELOCATE_UBOOT
|
|
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/* Console output */
|
|
#define CONFIG_ATMEL_USART 1
|
|
#undef CONFIG_USART0
|
|
#undef CONFIG_USART1
|
|
#undef CONFIG_USART2
|
|
#define CONFIG_USART3 1 /* USART 3 is DBGU */
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
#define CONFIG_BOOTP_BOOTPATH 1
|
|
#define CONFIG_BOOTP_GATEWAY 1
|
|
#define CONFIG_BOOTP_HOSTNAME 1
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#undef CONFIG_CMD_BDI
|
|
#undef CONFIG_CMD_AUTOSCRIPT
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_LOADS
|
|
#undef CONFIG_CMD_IMLS
|
|
#undef CONFIG_CMD_USB
|
|
|
|
#define CONFIG_CMD_PING 1
|
|
#define CONFIG_CMD_DHCP 1
|
|
#define CONFIG_CMD_NAND 1
|
|
|
|
/* LED */
|
|
#define CONFIG_AT91_LED 1
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM 0x20000000
|
|
|
|
/* DataFlash */
|
|
#define CONFIG_ATMEL_DATAFLASH_SPI
|
|
#define CONFIG_HAS_DATAFLASH 1
|
|
#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
|
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
|
|
#define AT91_SPI_CLK 15000000
|
|
#define DATAFLASH_TCSS (0x1a << 16)
|
|
#define DATAFLASH_TCHS (0x1 << 24)
|
|
|
|
/* NOR flash is not populated, disable it */
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
|
|
|
|
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB 1
|
|
#define CONFIG_RMII 1
|
|
#define CONFIG_NET_MULTI 1
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#undef CONFIG_RESET_PHY_R
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
#define CONFIG_SYS_MEMTEST_END 0x21e00000
|
|
|
|
#define CONFIG_SYS_USE_DATAFLASH 1
|
|
#undef CONFIG_SYS_USE_NANDFLASH
|
|
|
|
#ifdef CONFIG_SYS_USE_DATAFLASH
|
|
|
|
/* CAN */
|
|
#define CONFIG_AT91_CAN 1
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
#define CONFIG_ENV_IS_IN_DATAFLASH 1
|
|
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
|
|
0x8400)
|
|
#define CONFIG_ENV_OFFSET 0x4200
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
|
|
CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x4200
|
|
#define CONFIG_BOOTCOMMAND "cp.b C0042000 22000000 210000; bootm"
|
|
|
|
#else /* CONFIG_SYS_USE_NANDFLASH */
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_IS_IN_NAND 1
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
|
#define CONFIG_BOOTCOMMAND "nand read 22000000 A0000 200000; bootm"
|
|
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
|
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP 1
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN 0x2D000
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
|
|
|
|
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
#error CONFIG_USE_IRQ not supported
|
|
#endif
|
|
|
|
#endif
|
|
|