upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
245 lines
5.7 KiB
245 lines
5.7 KiB
/*
|
|
* Opencore tiny_spi driver
|
|
*
|
|
* http://opencores.org/project,tiny_spi
|
|
*
|
|
* based on bfin_spi.c
|
|
* Copyright (c) 2005-2008 Analog Devices Inc.
|
|
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#define TINY_SPI_STATUS_TXE 0x1
|
|
#define TINY_SPI_STATUS_TXR 0x2
|
|
|
|
struct tiny_spi_regs {
|
|
unsigned rxdata; /* Rx data reg */
|
|
unsigned txdata; /* Tx data reg */
|
|
unsigned status; /* Status reg */
|
|
unsigned control; /* Control reg */
|
|
unsigned baud; /* Baud reg */
|
|
};
|
|
|
|
struct tiny_spi_host {
|
|
uint base;
|
|
uint freq;
|
|
uint baudwidth;
|
|
};
|
|
static const struct tiny_spi_host tiny_spi_host_list[] =
|
|
CONFIG_SYS_TINY_SPI_LIST;
|
|
|
|
struct tiny_spi_slave {
|
|
struct spi_slave slave;
|
|
const struct tiny_spi_host *host;
|
|
uint mode;
|
|
uint baud;
|
|
uint flg;
|
|
};
|
|
#define to_tiny_spi_slave(s) container_of(s, struct tiny_spi_slave, slave)
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus < ARRAY_SIZE(tiny_spi_host_list) && gpio_is_valid(cs);
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
unsigned int cs = slave->cs;
|
|
|
|
gpio_set_value(cs, tiny_spi->flg);
|
|
debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
unsigned int cs = slave->cs;
|
|
|
|
gpio_set_value(cs, !tiny_spi->flg);
|
|
debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
|
|
}
|
|
|
|
void spi_set_speed(struct spi_slave *slave, uint hz)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
const struct tiny_spi_host *host = tiny_spi->host;
|
|
|
|
tiny_spi->baud = min(DIV_ROUND_UP(host->freq, hz * 2),
|
|
(1 << host->baudwidth)) - 1;
|
|
debug("%s: speed %u actual %u\n", __func__, hz,
|
|
host->freq / ((tiny_spi->baud + 1) * 2));
|
|
}
|
|
|
|
void spi_init(void)
|
|
{
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int hz, unsigned int mode)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi;
|
|
|
|
if (!spi_cs_is_valid(bus, cs) || gpio_request(cs, "tiny_spi"))
|
|
return NULL;
|
|
|
|
tiny_spi = spi_alloc_slave(struct tiny_spi_slave, bus, cs);
|
|
if (!tiny_spi)
|
|
return NULL;
|
|
|
|
tiny_spi->host = &tiny_spi_host_list[bus];
|
|
tiny_spi->mode = mode & (SPI_CPOL | SPI_CPHA);
|
|
tiny_spi->flg = mode & SPI_CS_HIGH ? 1 : 0;
|
|
spi_set_speed(&tiny_spi->slave, hz);
|
|
|
|
debug("%s: bus:%i cs:%i base:%lx\n", __func__,
|
|
bus, cs, tiny_spi->host->base);
|
|
return &tiny_spi->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
|
|
gpio_free(slave->cs);
|
|
free(tiny_spi);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
struct tiny_spi_regs *regs = (void *)tiny_spi->host->base;
|
|
|
|
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
|
|
gpio_direction_output(slave->cs, !tiny_spi->flg);
|
|
writel(tiny_spi->mode, ®s->control);
|
|
writel(tiny_spi->baud, ®s->baud);
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
|
|
}
|
|
|
|
#ifndef CONFIG_TINY_SPI_IDLE_VAL
|
|
# define CONFIG_TINY_SPI_IDLE_VAL 0xff
|
|
#endif
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave);
|
|
struct tiny_spi_regs *regs = (void *)tiny_spi->host->base;
|
|
const u8 *txp = dout;
|
|
u8 *rxp = din;
|
|
uint bytes = bitlen / 8;
|
|
uint i;
|
|
|
|
debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
|
|
slave->bus, slave->cs, bitlen, bytes, flags);
|
|
if (bitlen == 0)
|
|
goto done;
|
|
|
|
/* assume to do 8 bits transfers */
|
|
if (bitlen % 8) {
|
|
flags |= SPI_XFER_END;
|
|
goto done;
|
|
}
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(slave);
|
|
|
|
/* we need to tighten the transfer loop */
|
|
if (txp && rxp) {
|
|
writeb(*txp++, ®s->txdata);
|
|
if (bytes > 1) {
|
|
writeb(*txp++, ®s->txdata);
|
|
for (i = 2; i < bytes; i++) {
|
|
u8 rx, tx = *txp++;
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
rx = readb(®s->txdata);
|
|
writeb(tx, ®s->txdata);
|
|
*rxp++ = rx;
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
*rxp++ = readb(®s->txdata);
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXE))
|
|
;
|
|
*rxp++ = readb(®s->rxdata);
|
|
} else if (rxp) {
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
|
|
if (bytes > 1) {
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL,
|
|
®s->txdata);
|
|
for (i = 2; i < bytes; i++) {
|
|
u8 rx;
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
rx = readb(®s->txdata);
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL,
|
|
®s->txdata);
|
|
*rxp++ = rx;
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
*rxp++ = readb(®s->txdata);
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXE))
|
|
;
|
|
*rxp++ = readb(®s->rxdata);
|
|
} else if (txp) {
|
|
writeb(*txp++, ®s->txdata);
|
|
if (bytes > 1) {
|
|
writeb(*txp++, ®s->txdata);
|
|
for (i = 2; i < bytes; i++) {
|
|
u8 tx = *txp++;
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
writeb(tx, ®s->txdata);
|
|
}
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXE))
|
|
;
|
|
} else {
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata);
|
|
if (bytes > 1) {
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL,
|
|
®s->txdata);
|
|
for (i = 2; i < bytes; i++) {
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXR))
|
|
;
|
|
writeb(CONFIG_TINY_SPI_IDLE_VAL,
|
|
®s->txdata);
|
|
}
|
|
}
|
|
while (!(readb(®s->status) &
|
|
TINY_SPI_STATUS_TXE))
|
|
;
|
|
}
|
|
|
|
done:
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(slave);
|
|
|
|
return 0;
|
|
}
|
|
|