upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
242 lines
5.2 KiB
242 lines
5.2 KiB
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/errno.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#define __UBOOT__
|
|
#include <usb.h>
|
|
#include "linux-compat.h"
|
|
#include "usb-compat.h"
|
|
#include "musb_core.h"
|
|
#include "musb_host.h"
|
|
#include "musb_gadget.h"
|
|
|
|
#ifdef CONFIG_MUSB_HOST
|
|
static struct musb *host;
|
|
static struct usb_hcd hcd;
|
|
static enum usb_device_speed host_speed;
|
|
|
|
static void musb_host_complete_urb(struct urb *urb)
|
|
{
|
|
urb->dev->status &= ~USB_ST_NOT_PROC;
|
|
urb->dev->act_len = urb->actual_length;
|
|
}
|
|
|
|
static struct usb_host_endpoint hep;
|
|
static struct urb urb;
|
|
|
|
static struct urb *construct_urb(struct usb_device *dev, int endpoint_type,
|
|
unsigned long pipe, void *buffer, int len,
|
|
struct devrequest *setup, int interval)
|
|
{
|
|
int epnum = usb_pipeendpoint(pipe);
|
|
int is_in = usb_pipein(pipe);
|
|
|
|
memset(&urb, 0, sizeof(struct urb));
|
|
memset(&hep, 0, sizeof(struct usb_host_endpoint));
|
|
INIT_LIST_HEAD(&hep.urb_list);
|
|
INIT_LIST_HEAD(&urb.urb_list);
|
|
urb.ep = &hep;
|
|
urb.complete = musb_host_complete_urb;
|
|
urb.status = -EINPROGRESS;
|
|
urb.dev = dev;
|
|
urb.pipe = pipe;
|
|
urb.transfer_buffer = buffer;
|
|
urb.transfer_dma = (unsigned long)buffer;
|
|
urb.transfer_buffer_length = len;
|
|
urb.setup_packet = (unsigned char *)setup;
|
|
|
|
urb.ep->desc.wMaxPacketSize =
|
|
__cpu_to_le16(is_in ? dev->epmaxpacketin[epnum] :
|
|
dev->epmaxpacketout[epnum]);
|
|
urb.ep->desc.bmAttributes = endpoint_type;
|
|
urb.ep->desc.bEndpointAddress =
|
|
(is_in ? USB_DIR_IN : USB_DIR_OUT) | epnum;
|
|
urb.ep->desc.bInterval = interval;
|
|
|
|
return &urb;
|
|
}
|
|
|
|
#define MUSB_HOST_TIMEOUT 0x3ffffff
|
|
|
|
static int submit_urb(struct usb_hcd *hcd, struct urb *urb)
|
|
{
|
|
struct musb *host = hcd->hcd_priv;
|
|
int ret;
|
|
int timeout;
|
|
|
|
ret = musb_urb_enqueue(hcd, urb, 0);
|
|
if (ret < 0) {
|
|
printf("Failed to enqueue URB to controller\n");
|
|
return ret;
|
|
}
|
|
|
|
timeout = MUSB_HOST_TIMEOUT;
|
|
do {
|
|
if (ctrlc())
|
|
return -EIO;
|
|
host->isr(0, host);
|
|
} while ((urb->dev->status & USB_ST_NOT_PROC) && --timeout);
|
|
|
|
return urb->status;
|
|
}
|
|
|
|
int submit_control_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int len, struct devrequest *setup)
|
|
{
|
|
struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_CONTROL, pipe,
|
|
buffer, len, setup, 0);
|
|
|
|
/* Fix speed for non hub-attached devices */
|
|
if (!dev->parent)
|
|
dev->speed = host_speed;
|
|
|
|
return submit_urb(&hcd, urb);
|
|
}
|
|
|
|
|
|
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int len)
|
|
{
|
|
struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_BULK, pipe,
|
|
buffer, len, NULL, 0);
|
|
return submit_urb(&hcd, urb);
|
|
}
|
|
|
|
int submit_int_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int len, int interval)
|
|
{
|
|
struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_INT, pipe,
|
|
buffer, len, NULL, interval);
|
|
return submit_urb(&hcd, urb);
|
|
}
|
|
|
|
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
|
|
{
|
|
u8 power;
|
|
void *mbase;
|
|
int timeout = MUSB_HOST_TIMEOUT;
|
|
|
|
if (!host) {
|
|
printf("MUSB host is not registered\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
musb_start(host);
|
|
mbase = host->mregs;
|
|
do {
|
|
if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM)
|
|
break;
|
|
} while (--timeout);
|
|
if (!timeout)
|
|
return -ENODEV;
|
|
|
|
power = musb_readb(mbase, MUSB_POWER);
|
|
musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
|
|
udelay(30000);
|
|
power = musb_readb(mbase, MUSB_POWER);
|
|
musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
|
|
host->isr(0, host);
|
|
host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
|
|
USB_SPEED_HIGH :
|
|
(musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ?
|
|
USB_SPEED_FULL : USB_SPEED_LOW;
|
|
host->is_active = 1;
|
|
hcd.hcd_priv = host;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_lowlevel_stop(int index)
|
|
{
|
|
if (!host) {
|
|
printf("MUSB host is not registered\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
musb_stop(host);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MUSB_HOST */
|
|
|
|
#ifdef CONFIG_MUSB_GADGET
|
|
static struct musb *gadget;
|
|
|
|
int usb_gadget_handle_interrupts(void)
|
|
{
|
|
WATCHDOG_RESET();
|
|
if (!gadget || !gadget->isr)
|
|
return -EINVAL;
|
|
|
|
return gadget->isr(0, gadget);
|
|
}
|
|
|
|
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
int ret;
|
|
|
|
if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind ||
|
|
!driver->setup) {
|
|
printf("bad parameter.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!gadget) {
|
|
printf("Controller uninitialized\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = musb_gadget_start(&gadget->g, driver);
|
|
if (ret < 0) {
|
|
printf("gadget_start failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = driver->bind(&gadget->g);
|
|
if (ret < 0) {
|
|
printf("bind failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
if (driver->disconnect)
|
|
driver->disconnect(&gadget->g);
|
|
if (driver->unbind)
|
|
driver->unbind(&gadget->g);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MUSB_GADGET */
|
|
|
|
int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
|
|
void *ctl_regs)
|
|
{
|
|
struct musb **musbp;
|
|
|
|
switch (plat->mode) {
|
|
#ifdef CONFIG_MUSB_HOST
|
|
case MUSB_HOST:
|
|
musbp = &host;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MUSB_GADGET
|
|
case MUSB_PERIPHERAL:
|
|
musbp = &gadget;
|
|
break;
|
|
#endif
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*musbp = musb_init_controller(plat, (struct device *)bdata, ctl_regs);
|
|
if (!musbp) {
|
|
printf("Failed to init the controller\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|