upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
359 lines
9.2 KiB
359 lines
9.2 KiB
/*
|
|
* Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <altera.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <watchdog.h>
|
|
#include <asm/arch/misc.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/arch/scan_manager.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/system_manager.h>
|
|
#include <asm/arch/nic301.h>
|
|
#include <asm/arch/scu.h>
|
|
#include <asm/pl310.h>
|
|
|
|
#include <dt-bindings/reset/altr,rst-mgr.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct pl310_regs *const pl310 =
|
|
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
|
|
static struct socfpga_system_manager *sysmgr_regs =
|
|
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
|
|
static struct socfpga_reset_manager *reset_manager_base =
|
|
(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
|
|
static struct nic301_registers *nic301_regs =
|
|
(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
|
|
static struct scu_registers *scu_regs =
|
|
(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
|
|
static struct socfpga_sdr_ctrl *sdr_ctrl =
|
|
(struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
|
|
|
|
/*
|
|
* DesignWare Ethernet initialization
|
|
*/
|
|
#ifdef CONFIG_ETH_DESIGNWARE
|
|
void dwmac_deassert_reset(const unsigned int of_reset_id,
|
|
const u32 phymode)
|
|
{
|
|
u32 physhift, reset;
|
|
|
|
if (of_reset_id == EMAC0_RESET) {
|
|
physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
|
|
reset = SOCFPGA_RESET(EMAC0);
|
|
} else if (of_reset_id == EMAC1_RESET) {
|
|
physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
|
|
reset = SOCFPGA_RESET(EMAC1);
|
|
} else {
|
|
printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
|
|
return;
|
|
}
|
|
|
|
/* configure to PHY interface select choosed */
|
|
clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
|
|
SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
|
|
phymode << physhift);
|
|
|
|
/* Release the EMAC controller from reset */
|
|
socfpga_per_reset(reset, 0);
|
|
}
|
|
|
|
static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
|
|
{
|
|
if (!phymode)
|
|
return -EINVAL;
|
|
|
|
if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
|
|
*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(phymode, "rgmii")) {
|
|
*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(phymode, "rmii")) {
|
|
*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int socfpga_eth_reset(void)
|
|
{
|
|
const void *fdt = gd->fdt_blob;
|
|
struct fdtdec_phandle_args args;
|
|
const char *phy_mode;
|
|
u32 phy_modereg;
|
|
int nodes[2]; /* Max. two GMACs */
|
|
int ret, count;
|
|
int i, node;
|
|
|
|
/* Put both GMACs into RESET state. */
|
|
socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
|
|
socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
|
|
|
|
count = fdtdec_find_aliases_for_id(fdt, "ethernet",
|
|
COMPAT_ALTERA_SOCFPGA_DWMAC,
|
|
nodes, ARRAY_SIZE(nodes));
|
|
for (i = 0; i < count; i++) {
|
|
node = nodes[i];
|
|
if (node <= 0)
|
|
continue;
|
|
|
|
ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
|
|
"#reset-cells", 1, 0,
|
|
&args);
|
|
if (ret || (args.args_count != 1)) {
|
|
debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
|
|
continue;
|
|
}
|
|
|
|
phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
|
|
ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
|
|
if (ret) {
|
|
debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
|
|
continue;
|
|
}
|
|
|
|
dwmac_deassert_reset(args.args[0], phy_modereg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int socfpga_eth_reset(void)
|
|
{
|
|
return 0;
|
|
};
|
|
#endif
|
|
|
|
static const struct {
|
|
const u16 pn;
|
|
const char *name;
|
|
const char *var;
|
|
} const socfpga_fpga_model[] = {
|
|
/* Cyclone V E */
|
|
{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
|
|
{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
|
|
{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
|
|
{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
|
|
{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
|
|
/* Cyclone V GX/GT */
|
|
{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
|
|
{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
|
|
{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
|
|
{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
|
|
{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
|
|
/* Cyclone V SE/SX/ST */
|
|
{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
|
|
{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
|
|
{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
|
|
{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
|
|
/* Arria V */
|
|
{ 0x2d03, "Arria V, D5", "av_d5" },
|
|
};
|
|
|
|
static int socfpga_fpga_id(const bool print_id)
|
|
{
|
|
const u32 altera_mi = 0x6e;
|
|
const u32 id = scan_mgr_get_fpga_id();
|
|
|
|
const u32 lsb = id & 0x00000001;
|
|
const u32 mi = (id >> 1) & 0x000007ff;
|
|
const u32 pn = (id >> 12) & 0x0000ffff;
|
|
const u32 version = (id >> 28) & 0x0000000f;
|
|
int i;
|
|
|
|
if ((mi != altera_mi) || (lsb != 1)) {
|
|
printf("FPGA: Not Altera chip ID\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
|
|
if (pn == socfpga_fpga_model[i].pn)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(socfpga_fpga_model)) {
|
|
printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (print_id)
|
|
printf("FPGA: Altera %s, version 0x%01x\n",
|
|
socfpga_fpga_model[i].name, version);
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
* Print CPU information
|
|
*/
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
const u32 bsel =
|
|
SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
|
|
|
|
puts("CPU: Altera SoCFPGA Platform\n");
|
|
socfpga_fpga_id(1);
|
|
|
|
printf("BOOT: %s\n", bsel_str[bsel].name);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_MISC_INIT
|
|
int arch_misc_init(void)
|
|
{
|
|
const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
|
|
const int fpga_id = socfpga_fpga_id(0);
|
|
setenv("bootmode", bsel_str[bsel].mode);
|
|
if (fpga_id >= 0)
|
|
setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
|
|
return socfpga_eth_reset();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Convert all NIC-301 AMBA slaves from secure to non-secure
|
|
*/
|
|
static void socfpga_nic301_slave_ns(void)
|
|
{
|
|
writel(0x1, &nic301_regs->lwhps2fpgaregs);
|
|
writel(0x1, &nic301_regs->hps2fpgaregs);
|
|
writel(0x1, &nic301_regs->acp);
|
|
writel(0x1, &nic301_regs->rom);
|
|
writel(0x1, &nic301_regs->ocram);
|
|
writel(0x1, &nic301_regs->sdrdata);
|
|
}
|
|
|
|
static u32 iswgrp_handoff[8];
|
|
|
|
int arch_early_init_r(void)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Write magic value into magic register to unlock support for
|
|
* issuing warm reset. The ancient kernel code expects this
|
|
* value to be written into the register by the bootloader, so
|
|
* to support that old code, we write it here instead of in the
|
|
* reset_cpu() function just before resetting the CPU.
|
|
*/
|
|
writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
|
|
|
|
for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
|
|
iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
|
|
|
|
socfpga_bridges_reset(1);
|
|
|
|
socfpga_nic301_slave_ns();
|
|
|
|
/*
|
|
* Private components security:
|
|
* U-Boot : configure private timer, global timer and cpu component
|
|
* access as non secure for kernel stage (as required by Linux)
|
|
*/
|
|
setbits_le32(&scu_regs->sacr, 0xfff);
|
|
|
|
/* Configure the L2 controller to make SDRAM start at 0 */
|
|
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
|
|
writel(0x2, &nic301_regs->remap);
|
|
#else
|
|
writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
|
|
writel(0x1, &pl310->pl310_addr_filter_start);
|
|
#endif
|
|
|
|
/* Add device descriptor to FPGA device table */
|
|
socfpga_fpga_add();
|
|
|
|
#ifdef CONFIG_DESIGNWARE_SPI
|
|
/* Get Designware SPI controller out of reset */
|
|
socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
|
|
socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_DENALI
|
|
socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void socfpga_sdram_apply_static_cfg(void)
|
|
{
|
|
const u32 applymask = 0x8;
|
|
u32 val = readl(&sdr_ctrl->static_cfg) | applymask;
|
|
|
|
/*
|
|
* SDRAM staticcfg register specific:
|
|
* When applying the register setting, the CPU must not access
|
|
* SDRAM. Luckily for us, we can abuse i-cache here to help us
|
|
* circumvent the SDRAM access issue. The idea is to make sure
|
|
* that the code is in one full i-cache line by branching past
|
|
* it and back. Once it is in the i-cache, we execute the core
|
|
* of the code and apply the register settings.
|
|
*
|
|
* The code below uses 7 instructions, while the Cortex-A9 has
|
|
* 32-byte cachelines, thus the limit is 8 instructions total.
|
|
*/
|
|
asm volatile(
|
|
".align 5 \n"
|
|
" b 2f \n"
|
|
"1: str %0, [%1] \n"
|
|
" dsb \n"
|
|
" isb \n"
|
|
" b 3f \n"
|
|
"2: b 1b \n"
|
|
"3: nop \n"
|
|
: : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
|
|
}
|
|
|
|
int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
argv++;
|
|
|
|
switch (*argv[0]) {
|
|
case 'e': /* Enable */
|
|
writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
|
|
socfpga_sdram_apply_static_cfg();
|
|
writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
|
|
writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
|
|
writel(iswgrp_handoff[1], &nic301_regs->remap);
|
|
break;
|
|
case 'd': /* Disable */
|
|
writel(0, &sysmgr_regs->fpgaintfgrp_module);
|
|
writel(0, &sdr_ctrl->fpgaport_rst);
|
|
socfpga_sdram_apply_static_cfg();
|
|
writel(0, &reset_manager_base->brg_mod_reset);
|
|
writel(1, &nic301_regs->remap);
|
|
break;
|
|
default:
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
bridge, 2, 1, do_bridge,
|
|
"SoCFPGA HPS FPGA bridge control",
|
|
"enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
|
|
"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
|
|
""
|
|
);
|
|
|