upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mpc8323erdb
..
Kconfig
MAINTAINERS
Makefile
README
mpc8323erdb.c

README

Freescale MPC8323ERDB Board
-----------------------------------------

1. Memory Map
The memory map looks like this:

0x0000_0000 0x03ff_ffff DDR 64M
0x8000_0000 0x8fff_ffff PCI MEM 256M
0x9000_0000 0x9fff_ffff PCI_MMIO 256M
0xe000_0000 0xe00f_ffff IMMR 1M
0xd000_0000 0xd3ff_ffff PCI IO 64M
0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M

2. Compilation

Assuming you're using BASH (or similar) as your shell:

export CROSS_COMPILE=your-cross-compiler-prefix-
make distclean
make MPC8323ERDB_config
make

3. Downloading and Flashing Images

3.1 Reflash U-Boot Image using U-Boot

N.b, have an alternate means of programming
the flash available if the new U-Boot doesn't boot.

First try a:

tftpboot $loadaddr $uboot

to make sure that the TFTP load will succeed before
an erase goes ahead and wipes out your current firmware.
Then do a:

run tftpflash

which is a shorter version of the manual sequence:

tftp $loadaddr u-boot.bin
protect off fe000000 +$filesize
erase fe000000 +$filesize
cp.b $loadaddr fe000000 $filesize

To keep your old U-Boot's environment variables, do a:

saveenv

prior to resetting the board.

3.2 Downloading and Booting Linux Kernel

Ensure that all networking-related environment variables are set
properly (including ipaddr, serverip, gatewayip (if needed),
netmask, ethaddr, eth1addr, rootpath (if using NFS root),
fdtfile, and bootfile).

Then, do one of the following, depending on whether you
want an NFS root or a ramdisk root:

run nfsboot

or

run ramboot

4 Notes

The console baudrate for MPC8323ERDB is 115200bps.