upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
449 lines
14 KiB
449 lines
14 KiB
/*
|
|
* Chromium OS cros_ec driver
|
|
*
|
|
* Copyright (c) 2012 The Chromium OS Authors.
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _CROS_EC_H
|
|
#define _CROS_EC_H
|
|
|
|
#include <linux/compiler.h>
|
|
#include <ec_commands.h>
|
|
#include <fdtdec.h>
|
|
#include <cros_ec_message.h>
|
|
|
|
/* Which interface is the device on? */
|
|
enum cros_ec_interface_t {
|
|
CROS_EC_IF_NONE,
|
|
CROS_EC_IF_SPI,
|
|
CROS_EC_IF_I2C,
|
|
CROS_EC_IF_LPC, /* Intel Low Pin Count interface */
|
|
};
|
|
|
|
/* Our configuration information */
|
|
struct cros_ec_dev {
|
|
enum cros_ec_interface_t interface;
|
|
struct spi_slave *spi; /* Our SPI slave, if using SPI */
|
|
int node; /* Our node */
|
|
int parent_node; /* Our parent node (interface) */
|
|
unsigned int cs; /* Our chip select */
|
|
unsigned int addr; /* Device address (for I2C) */
|
|
unsigned int bus_num; /* Bus number (for I2C) */
|
|
unsigned int max_frequency; /* Maximum interface frequency */
|
|
struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */
|
|
int cmd_version_is_supported; /* Device supports command versions */
|
|
int optimise_flash_write; /* Don't write erased flash blocks */
|
|
|
|
/*
|
|
* These two buffers will always be dword-aligned and include enough
|
|
* space for up to 7 word-alignment bytes also, so we can ensure that
|
|
* the body of the message is always dword-aligned (64-bit).
|
|
*
|
|
* We use this alignment to keep ARM and x86 happy. Probably word
|
|
* alignment would be OK, there might be a small performance advantage
|
|
* to using dword.
|
|
*/
|
|
uint8_t din[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
|
|
__aligned(sizeof(int64_t));
|
|
uint8_t dout[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
|
|
__aligned(sizeof(int64_t));
|
|
};
|
|
|
|
/*
|
|
* Hard-code the number of columns we happen to know we have right now. It
|
|
* would be more correct to call cros_ec_info() at startup and determine the
|
|
* actual number of keyboard cols from there.
|
|
*/
|
|
#define CROS_EC_KEYSCAN_COLS 13
|
|
|
|
/* Information returned by a key scan */
|
|
struct mbkp_keyscan {
|
|
uint8_t data[CROS_EC_KEYSCAN_COLS];
|
|
};
|
|
|
|
/**
|
|
* Read the ID of the CROS-EC device
|
|
*
|
|
* The ID is a string identifying the CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param id Place to put the ID
|
|
* @param maxlen Maximum length of the ID field
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen);
|
|
|
|
/**
|
|
* Read a keyboard scan from the CROS-EC device
|
|
*
|
|
* Send a message requesting a keyboard scan and return the result
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param scan Place to put the scan results
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan);
|
|
|
|
/**
|
|
* Read which image is currently running on the CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param image Destination for image identifier
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_read_current_image(struct cros_ec_dev *dev,
|
|
enum ec_current_image *image);
|
|
|
|
/**
|
|
* Read the hash of the CROS-EC device firmware.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param hash Destination for hash information
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_read_hash(struct cros_ec_dev *dev,
|
|
struct ec_response_vboot_hash *hash);
|
|
|
|
/**
|
|
* Send a reboot command to the CROS-EC device.
|
|
*
|
|
* Note that some reboot commands (such as EC_REBOOT_COLD) also reboot the AP.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param cmd Reboot command
|
|
* @param flags Flags for reboot command (EC_REBOOT_FLAG_*)
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
|
|
uint8_t flags);
|
|
|
|
/**
|
|
* Check if the CROS-EC device has an interrupt pending.
|
|
*
|
|
* Read the status of the external interrupt connected to the CROS-EC device.
|
|
* If no external interrupt is configured, this always returns 1.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @return 0 if no interrupt is pending
|
|
*/
|
|
int cros_ec_interrupt_pending(struct cros_ec_dev *dev);
|
|
|
|
enum {
|
|
CROS_EC_OK,
|
|
CROS_EC_ERR = 1,
|
|
CROS_EC_ERR_FDT_DECODE,
|
|
CROS_EC_ERR_CHECK_VERSION,
|
|
CROS_EC_ERR_READ_ID,
|
|
CROS_EC_ERR_DEV_INIT,
|
|
};
|
|
|
|
/**
|
|
* Set up the Chromium OS matrix keyboard protocol
|
|
*
|
|
* @param blob Device tree blob containing setup information
|
|
* @param cros_ecp Returns pointer to the cros_ec device, or NULL if none
|
|
* @return 0 if we got an cros_ec device and all is well (or no cros_ec is
|
|
* expected), -ve if we should have an cros_ec device but failed to find
|
|
* one, or init failed (-CROS_EC_ERR_...).
|
|
*/
|
|
int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp);
|
|
|
|
/**
|
|
* Read information about the keyboard matrix
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param info Place to put the info structure
|
|
*/
|
|
int cros_ec_info(struct cros_ec_dev *dev,
|
|
struct ec_response_cros_ec_info *info);
|
|
|
|
/**
|
|
* Read the host event flags
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param events_ptr Destination for event flags. Not changed on error.
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr);
|
|
|
|
/**
|
|
* Clear the specified host event flags
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param events Event flags to clear
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events);
|
|
|
|
/**
|
|
* Get/set flash protection
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param set_mask Mask of flags to set; if 0, just retrieves existing
|
|
* protection state without changing it.
|
|
* @param set_flags New flag values; only bits in set_mask are applied;
|
|
* ignored if set_mask=0.
|
|
* @param prot Destination for updated protection state from EC.
|
|
* @return 0 if ok, <0 on error
|
|
*/
|
|
int cros_ec_flash_protect(struct cros_ec_dev *dev,
|
|
uint32_t set_mask, uint32_t set_flags,
|
|
struct ec_response_flash_protect *resp);
|
|
|
|
|
|
/**
|
|
* Run internal tests on the cros_ec interface.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @return 0 if ok, <0 if the test failed
|
|
*/
|
|
int cros_ec_test(struct cros_ec_dev *dev);
|
|
|
|
/**
|
|
* Update the EC RW copy.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param image the content to write
|
|
* @param imafge_size content length
|
|
* @return 0 if ok, <0 if the test failed
|
|
*/
|
|
int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
|
|
const uint8_t *image, int image_size);
|
|
|
|
/**
|
|
* Return a pointer to the board's CROS-EC device
|
|
*
|
|
* This should be implemented by board files.
|
|
*
|
|
* @return pointer to CROS-EC device, or NULL if none is available
|
|
*/
|
|
struct cros_ec_dev *board_get_cros_ec_dev(void);
|
|
|
|
|
|
/* Internal interfaces */
|
|
int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob);
|
|
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob);
|
|
int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob);
|
|
|
|
/**
|
|
* Read information from the fdt for the i2c cros_ec interface
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param blob Device tree blob
|
|
* @return 0 if ok, -1 if we failed to read all required information
|
|
*/
|
|
int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob);
|
|
|
|
/**
|
|
* Read information from the fdt for the spi cros_ec interface
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param blob Device tree blob
|
|
* @return 0 if ok, -1 if we failed to read all required information
|
|
*/
|
|
int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob);
|
|
|
|
/**
|
|
* Check whether the LPC interface supports new-style commands.
|
|
*
|
|
* LPC has its own way of doing this, which involves checking LPC values
|
|
* visible to the host. Do this, and update dev->cmd_version_is_supported
|
|
* accordingly.
|
|
*
|
|
* @param dev CROS-EC device to check
|
|
*/
|
|
int cros_ec_lpc_check_version(struct cros_ec_dev *dev);
|
|
|
|
/**
|
|
* Send a command to an I2C CROS-EC device and return the reply.
|
|
*
|
|
* This rather complicated function deals with sending both old-style and
|
|
* new-style commands. The old ones have just a command byte and arguments.
|
|
* The new ones have version, command, arg-len, [args], chksum so are 3 bytes
|
|
* longer.
|
|
*
|
|
* The device's internal input/output buffers are used.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param cmd Command to send (EC_CMD_...)
|
|
* @param cmd_version Version of command to send (EC_VER_...)
|
|
* @param dout Output data (may be NULL If dout_len=0)
|
|
* @param dout_len Size of output data in bytes
|
|
* @param dinp Returns pointer to response data
|
|
* @param din_len Maximum size of response in bytes
|
|
* @return number of bytes in response, or -1 on error
|
|
*/
|
|
int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
|
|
const uint8_t *dout, int dout_len,
|
|
uint8_t **dinp, int din_len);
|
|
|
|
/**
|
|
* Send a command to a LPC CROS-EC device and return the reply.
|
|
*
|
|
* The device's internal input/output buffers are used.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param cmd Command to send (EC_CMD_...)
|
|
* @param cmd_version Version of command to send (EC_VER_...)
|
|
* @param dout Output data (may be NULL If dout_len=0)
|
|
* @param dout_len Size of output data in bytes
|
|
* @param dinp Returns pointer to response data
|
|
* @param din_len Maximum size of response in bytes
|
|
* @return number of bytes in response, or -1 on error
|
|
*/
|
|
int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
|
|
const uint8_t *dout, int dout_len,
|
|
uint8_t **dinp, int din_len);
|
|
|
|
int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
|
|
const uint8_t *dout, int dout_len,
|
|
uint8_t **dinp, int din_len);
|
|
|
|
/**
|
|
* Dump a block of data for a command.
|
|
*
|
|
* @param name Name for data (e.g. 'in', 'out')
|
|
* @param cmd Command number associated with data, or -1 for none
|
|
* @param data Data block to dump
|
|
* @param len Length of data block to dump
|
|
*/
|
|
void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len);
|
|
|
|
/**
|
|
* Calculate a simple 8-bit checksum of a data block
|
|
*
|
|
* @param data Data block to checksum
|
|
* @param size Size of data block in bytes
|
|
* @return checksum value (0 to 255)
|
|
*/
|
|
int cros_ec_calc_checksum(const uint8_t *data, int size);
|
|
|
|
/**
|
|
* Decode a flash region parameter
|
|
*
|
|
* @param argc Number of params remaining
|
|
* @param argv List of remaining parameters
|
|
* @return flash region (EC_FLASH_REGION_...) or -1 on error
|
|
*/
|
|
int cros_ec_decode_region(int argc, char * const argv[]);
|
|
|
|
int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset,
|
|
uint32_t size);
|
|
|
|
/**
|
|
* Read data from the flash
|
|
*
|
|
* Read an arbitrary amount of data from the EC flash, by repeatedly reading
|
|
* small blocks.
|
|
*
|
|
* The offset starts at 0. You can obtain the region information from
|
|
* cros_ec_flash_offset() to find out where to read for a particular region.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param data Pointer to data buffer to read into
|
|
* @param offset Offset within flash to read from
|
|
* @param size Number of bytes to read
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
|
|
uint32_t size);
|
|
|
|
/**
|
|
* Write data to the flash
|
|
*
|
|
* Write an arbitrary amount of data to the EC flash, by repeatedly writing
|
|
* small blocks.
|
|
*
|
|
* The offset starts at 0. You can obtain the region information from
|
|
* cros_ec_flash_offset() to find out where to write for a particular region.
|
|
*
|
|
* Attempting to write to the region where the EC is currently running from
|
|
* will result in an error.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param data Pointer to data buffer to write
|
|
* @param offset Offset within flash to write to.
|
|
* @param size Number of bytes to write
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
|
|
uint32_t offset, uint32_t size);
|
|
|
|
/**
|
|
* Obtain position and size of a flash region
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param region Flash region to query
|
|
* @param offset Returns offset of flash region in EC flash
|
|
* @param size Returns size of flash region
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
|
|
uint32_t *offset, uint32_t *size);
|
|
|
|
/**
|
|
* Read/write VbNvContext from/to a CROS-EC device.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param block Buffer of VbNvContext to be read/write
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block);
|
|
int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block);
|
|
|
|
/**
|
|
* Read the version information for the EC images
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param versionp This is set to point to the version information
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_version(struct cros_ec_dev *dev,
|
|
struct ec_response_get_version **versionp);
|
|
|
|
/**
|
|
* Read the build information for the EC
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param versionp This is set to point to the build string
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
|
|
|
|
/**
|
|
* Switch on/off a LDO / FET.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param index index of the LDO/FET to switch
|
|
* @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
|
|
|
|
/**
|
|
* Read back a LDO / FET current state.
|
|
*
|
|
* @param dev CROS-EC device
|
|
* @param index index of the LDO/FET to switch
|
|
* @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
|
|
#endif
|
|
|