upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
190 lines
5.1 KiB
190 lines
5.1 KiB
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* Configuration settings for the ATSTK1002 CPU daughterboard
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_AVR32 1
|
|
#define CONFIG_AT32AP 1
|
|
#define CONFIG_AT32AP7000 1
|
|
#define CONFIG_ATSTK1002 1
|
|
#define CONFIG_ATSTK1000 1
|
|
|
|
#define CONFIG_ATSTK1000_EXT_FLASH 1
|
|
|
|
/*
|
|
* Timer clock frequency. We're using the CPU-internal COUNT register
|
|
* for this, so this is equivalent to the CPU core clock frequency
|
|
*/
|
|
#define CFG_HZ 1000
|
|
|
|
/*
|
|
* Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
|
|
* frequency and the peripherals to run at 1/4 the PLL frequency.
|
|
*/
|
|
#define CONFIG_PLL 1
|
|
#define CFG_POWER_MANAGER 1
|
|
#define CFG_OSC0_HZ 20000000
|
|
#define CFG_PLL0_DIV 1
|
|
#define CFG_PLL0_MUL 7
|
|
#define CFG_PLL0_SUPPRESS_CYCLES 16
|
|
#define CFG_CLKDIV_CPU 0
|
|
#define CFG_CLKDIV_HSB 1
|
|
#define CFG_CLKDIV_PBA 2
|
|
#define CFG_CLKDIV_PBB 1
|
|
|
|
/*
|
|
* The PLLOPT register controls the PLL like this:
|
|
* icp = PLLOPT<2>
|
|
* ivco = PLLOPT<1:0>
|
|
*
|
|
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
|
|
*/
|
|
#define CFG_PLL0_OPT 0x04
|
|
|
|
#undef CONFIG_USART0
|
|
#define CONFIG_USART1 1
|
|
#undef CONFIG_USART2
|
|
#undef CONFIG_USART3
|
|
|
|
/* User serviceable stuff */
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_STACKSIZE (2048)
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_BOOTARGS \
|
|
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"fsload; bootm $(fileaddr)"
|
|
|
|
/*
|
|
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
|
|
* data on the serial line may interrupt the boot sequence.
|
|
*/
|
|
#define CONFIG_BOOTDELAY 2
|
|
#define CONFIG_AUTOBOOT 1
|
|
#define CONFIG_AUTOBOOT_KEYED 1
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"Press SPACE to abort autoboot in %d seconds\n"
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
|
|
/*
|
|
* These are "locally administered ethernet addresses" generated by
|
|
* ./tools/gen_eth_addr
|
|
*
|
|
* After booting the board for the first time, new addresses should be
|
|
* generated and assigned to the environment variables "ethaddr" and
|
|
* "eth1addr".
|
|
*/
|
|
#define CONFIG_ETHADDR "6a:87:71:14:cd:cb"
|
|
#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6"
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
|
|
#define CONFIG_NET_MULTI 1
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \
|
|
| CONFIG_BOOTP_GATEWAY)
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
#undef CONFIG_CMD_AUTOSCRIPT
|
|
#undef CONFIG_CMD_SETGETDCR
|
|
#undef CONFIG_CMD_XIMG
|
|
|
|
#define CONFIG_ATMEL_USART 1
|
|
#define CONFIG_MACB 1
|
|
#define CONFIG_PIO2 1
|
|
#define CFG_NR_PIOS 5
|
|
#define CFG_HSDRAMC 1
|
|
#define CONFIG_MMC 1
|
|
|
|
#define CFG_DCACHE_LINESZ 32
|
|
#define CFG_ICACHE_LINESZ 32
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
/* External flash on STK1000 */
|
|
#if 0
|
|
#define CFG_FLASH_CFI 1
|
|
#define CFG_FLASH_CFI_DRIVER 1
|
|
#endif
|
|
|
|
#define CFG_FLASH_BASE 0x00000000
|
|
#define CFG_FLASH_SIZE 0x800000
|
|
#define CFG_MAX_FLASH_BANKS 1
|
|
#define CFG_MAX_FLASH_SECT 135
|
|
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
|
|
|
#define CFG_INTRAM_BASE 0x24000000
|
|
#define CFG_INTRAM_SIZE 0x8000
|
|
|
|
#define CFG_SDRAM_BASE 0x10000000
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_SIZE 65536
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
|
|
|
|
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
|
|
|
|
#define CFG_MALLOC_LEN (256*1024)
|
|
#define CFG_DMA_ALLOC_LEN (16384)
|
|
|
|
/* Allow 2MB for the kernel run-time image */
|
|
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
|
|
#define CFG_BOOTPARAMS_LEN (16 * 1024)
|
|
|
|
/* Other configuration settings that shouldn't have to change all that often */
|
|
#define CFG_PROMPT "Uboot> "
|
|
#define CFG_CBSIZE 256
|
|
#define CFG_MAXARGS 8
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
|
|
#define CFG_LONGHELP 1
|
|
|
|
#define CFG_MEMTEST_START \
|
|
({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
|
|
#define CFG_MEMTEST_END \
|
|
({ \
|
|
DECLARE_GLOBAL_DATA_PTR; \
|
|
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
|
|
})
|
|
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
|
|
|
|
#endif /* __CONFIG_H */
|
|
|