upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
64 lines
2.4 KiB
64 lines
2.4 KiB
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Copyright(c) 2003 Motorola Inc.
|
|
* Xianghua Xiao (x.xiao@motorola.com)
|
|
*/
|
|
|
|
#ifndef __MPC85xx_H__
|
|
#define __MPC85xx_H__
|
|
|
|
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
|
|
#define _START_OFFSET EXC_OFF_SYS_RESET
|
|
|
|
#if defined(CONFIG_E500)
|
|
#include <e500.h>
|
|
#endif
|
|
|
|
/*
|
|
* SCCR - System Clock Control Register, 9-8
|
|
*/
|
|
#define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */
|
|
#define SCCR_DFBRG_MSK 0x00000003 /* Division by BRGCLK Mask */
|
|
#define SCCR_DFBRG_SHIFT 0
|
|
|
|
#define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */
|
|
#define SCCR_DFBRG01 0x00000001 /* BRGCLK div by 16 (normal) */
|
|
#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
|
|
#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
|
|
|
|
/*
|
|
* Local Bus Controller - memory controller registers
|
|
*/
|
|
#define BRx_V 0x00000001 /* Bank Valid */
|
|
#define BRx_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
|
|
#define BRx_MS_SDRAM 0x00000000 /* SDRAM Machine Select */
|
|
#define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
|
|
#define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */
|
|
#define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */
|
|
#define BRx_PS_8 0x00000800 /* 8 bit port size */
|
|
#define BRx_PS_32 0x00001800 /* 32 bit port size */
|
|
#define BRx_BA_MSK 0xffff8000 /* Base Address Mask */
|
|
|
|
#define ORxG_EAD 0x00000001 /* External addr latch delay */
|
|
#define ORxG_EHTR 0x00000002 /* Extended hold time on read */
|
|
#define ORxG_TRLX 0x00000004 /* Timing relaxed */
|
|
#define ORxG_SETA 0x00000008 /* External address termination */
|
|
#define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
|
|
#define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
|
|
#define ORxG_XACS 0x00000100 /* Extra addr to CS setup */
|
|
#define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/
|
|
#define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */
|
|
|
|
#define ORxU_BI 0x00000100 /* Burst Inhibit */
|
|
#define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */
|
|
|
|
#define MxMR_OP_NORM 0x00000000 /* Normal Operation */
|
|
#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
|
|
#define MxMR_OP_WARR 0x10000000 /* Write to Array */
|
|
#define MxMR_BSEL 0x80000000 /* Bus Select */
|
|
|
|
/* helpers to convert values into an OR address mask (GPCM mode) */
|
|
#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
|
|
#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
|
|
|
|
#endif /* __MPC85xx_H__ */
|
|
|