upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/phy/icplus.c

80 lines
2.0 KiB

/*
* ICPlus PHY drivers
*
* SPDX-License-Identifier: GPL-2.0+
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*/
#include <phy.h>
/* IP101A/G - IP1001 */
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
static int ip1001_config(struct phy_device *phydev)
{
int c;
/* Enable Auto Power Saving mode */
c = phy_read(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2);
if (c < 0)
return c;
c |= IP1001_APS_ON;
c = phy_write(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2, c);
if (c < 0)
return c;
/* INTR pin used: speed/link/duplex will cause an interrupt */
c = phy_write(phydev, MDIO_DEVAD_NONE, IP101A_G_IRQ_CONF_STATUS,
IP101A_G_IRQ_DEFAULT);
if (c < 0)
return c;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
/*
* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface
*/
c = phy_read(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS);
if (c < 0)
return c;
c |= IP1001_PHASE_SEL_MASK;
c = phy_write(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS,
c);
if (c < 0)
return c;
}
return 0;
}
static int ip1001_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
genphy_parse_link(phydev);
return 0;
}
static struct phy_driver IP1001_driver = {
.name = "ICPlus IP1001",
.uid = 0x02430d90,
.mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES,
.config = &ip1001_config,
.startup = &ip1001_startup,
.shutdown = &genphy_shutdown,
};
int phy_icplus_init(void)
{
phy_register(&IP1001_driver);
return 0;
}