upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
102 lines
2.8 KiB
102 lines
2.8 KiB
/*
|
|
* (C) Copyright 2006 DENX Software Engineering
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* DA9030 register definitions */
|
|
#define CID 0x00
|
|
#define EVENT_A 0x01
|
|
#define EVENT_B 0x02
|
|
#define EVENT_C 0x03
|
|
#define STATUS 0x04
|
|
#define IRQ_MASK_A 0x05
|
|
#define IRQ_MASK_B 0x06
|
|
#define IRQ_MASK_C 0x07
|
|
#define SYS_CONTROL_A 0x08
|
|
#define SYS_CONTROL_B 0x09
|
|
#define FAULT_LOG 0x0A
|
|
#define LDO_10_11 0x10
|
|
#define LDO_15 0x11
|
|
#define LDO_14_16 0x12
|
|
#define LDO_18_19 0x13
|
|
#define LDO_17_SIMCP0 0x14
|
|
#define BUCK2_DVC1 0x15
|
|
#define BUCK2_DVC2 0x16
|
|
#define REG_CONTROL_1_17 0x17
|
|
#define REG_CONTROL_2_18 0x18
|
|
#define USBPUMP 0x19
|
|
#define SLEEP_CONTROL 0x1A
|
|
#define STARTUP_CONTROL 0x1B
|
|
#define LED1_CONTROL 0x20
|
|
#define LED2_CONTROL 0x21
|
|
#define LED3_CONTROL 0x22
|
|
#define LED4_CONTROL 0x23
|
|
#define LEDPC_CONTROL 0x24
|
|
#define WLED_CONTROL 0x25
|
|
#define MISC_CONTROLA 0x26
|
|
#define MISC_CONTROLB 0x27
|
|
#define CHARGE_CONTROL 0x28
|
|
#define CCTR_CONTROL 0x29
|
|
#define TCTR_CONTROL 0x2A
|
|
#define CHARGE_PULSE 0x2B
|
|
|
|
/* ... some missing ...*/
|
|
|
|
#define LDO1 0x90
|
|
#define LDO2_3 0x91
|
|
#define LDO4_5 0x92
|
|
#define LDO6_SIMCP 0x93
|
|
#define LDO7_8 0x94
|
|
#define LDO9_12 0x95
|
|
#define BUCK 0x96
|
|
#define REG_CONTROL_1_97 0x97
|
|
#define REG_CONTROL_2_98 0x98
|
|
#define REG_SLEEP_CONTROL1 0x99
|
|
#define REG_SLEEP_CONTROL2 0x9A
|
|
#define REG_SLEEP_CONTROL3 0x9B
|
|
#define ADC_MAN_CONTROL 0xA0
|
|
#define ADC_AUTO_CONTROL 0xA1
|
|
#define VBATMON 0xA2
|
|
#define VBATMONTXMON 0xA3
|
|
#define TBATHIGHP 0xA4
|
|
#define TBATHIGHN 0xA5
|
|
#define TBATLOW 0xA6
|
|
#define MAN_RES 0xB0
|
|
#define VBAT_RES 0xB1
|
|
#define VBATMIN_RES 0xB2
|
|
#define VBATMINTXON_RES 0xB3
|
|
#define ICHMAX_RES 0xB4
|
|
#define ICHMIN_RES 0xB5
|
|
#define ICHAVERAGE_RES 0xB6
|
|
#define VCHMAX_RES 0xB7
|
|
#define VCHMIN_RES 0xB8
|
|
#define TBAT_RES 0xB9
|
|
#define ADC_IN4_RES 0xBA
|
|
|
|
#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */
|
|
#define STATUS_PWREN1 (1<<1) /* PWREN1 value */
|
|
#define STATUS_EXTON (1<<2) /* EXTON value */
|
|
#define STATUS_CHDET (1<<3) /* Charger detection status */
|
|
#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */
|
|
#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */
|
|
#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */
|
|
#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */
|
|
|
|
#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
|
|
#define SYS_CONTROL_A_SHUT_DOWN (1<<1)
|
|
#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
|
|
#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
|
|
#define SYS_CONTROL_A_WATCHDOG (1<<7)
|
|
|
|
#define MISC_CONTROLB_USB_INT_RISING (1<<2)
|
|
#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
|
|
|
|
#define USB_PUMP_USBVE (1<<0)
|
|
#define USB_PUMP_USBVEP (1<<1)
|
|
#define USB_PUMP_SRP_DETECT (1<<2)
|
|
#define USB_PUMP_SESSION_VALID (1<<3)
|
|
#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
|
|
#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
|
|
#define USB_PUMP_EN_USBVE (1<<6)
|
|
#define USB_PUMP_EN_USBVEP (1<<7)
|
|
|