upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
320 lines
12 KiB
320 lines
12 KiB
/*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/************************************************************************
|
|
* yosemite.h - configuration for YOSEMITE board
|
|
***********************************************************************/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* High Level Configuration Options
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_YOSEMITE 1 /* Board is Yosemite */
|
|
#define CONFIG_440EP 1 /* Specific PPC440EP support */
|
|
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
|
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
|
|
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
|
|
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
|
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
|
|
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
|
|
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
|
|
#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
|
|
#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
|
|
|
|
/*Don't change either of these*/
|
|
#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/
|
|
#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/
|
|
/*Don't change either of these*/
|
|
|
|
#define CFG_USB_DEVICE 0x50000000
|
|
#define CFG_NVRAM_BASE_ADDR 0x80000000
|
|
#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
|
|
#define CFG_BOOT_BASE_ADDR 0xf0000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Initial RAM & stack pointer (placed in SDRAM)
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
|
|
#define CFG_INIT_RAM_END (8 << 10)
|
|
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Serial Port
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SERIAL_MULTI 1
|
|
/*define this if you want console on UART1*/
|
|
#undef CONFIG_UART1_CONSOLE
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment
|
|
*----------------------------------------------------------------------*/
|
|
/*
|
|
* Define here the location of the environment variables (FLASH or EEPROM).
|
|
* Note: DENX encourages to use redundant environment in FLASH.
|
|
*/
|
|
#if 1
|
|
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
|
#else
|
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
#endif /* CFG_ENV_IS_IN_FLASH */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* DDR SDRAM
|
|
*----------------------------------------------------------------------*/
|
|
#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
|
|
#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */
|
|
#define CFG_SDRAM_BANKS (2)
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
#define CFG_I2C_MULTI_EEPROMS
|
|
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
#ifdef CFG_ENV_IS_IN_EEPROM
|
|
#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
|
|
#define CFG_ENV_OFFSET 0x0
|
|
#endif /* CFG_ENV_IS_IN_EEPROM */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"hostname=yosemite\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
|
|
":$(hostname):$(netdev):off panic=1\0" \
|
|
"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
|
|
"flash_nfs=run nfsargs addip addtty;" \
|
|
"bootm $(kernel_addr)\0" \
|
|
"flash_self=run ramargs addip addtty;" \
|
|
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
|
|
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
|
|
"bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_4xx\0" \
|
|
"bootfile=/tftpboot/yosemite/uImage\0" \
|
|
"kernel_addr=fc000000\0" \
|
|
"ramdisk_addr=fc100000\0" \
|
|
"load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \
|
|
"update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
|
|
"cp.b 100000 fff80000 80000;" \
|
|
"setenv filesize;saveenv\0" \
|
|
"upd=run load;run update\0" \
|
|
""
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
#if 0
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
#define CONFIG_NET_MULTI 1 /* required for netconsole */
|
|
#define CONFIG_PHY1_ADDR 3
|
|
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
|
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
|
|
|
|
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
|
|
|
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
#ifdef CONFIG_440EP
|
|
/* USB */
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/*Comment this out to enable USB 1.1 device*/
|
|
#define USB_2_0_DEVICE
|
|
#endif /*CONFIG_440EP*/
|
|
|
|
#ifdef DEBUG
|
|
#define CONFIG_PANIC_HANG
|
|
#else
|
|
#define CONFIG_HW_WATCHDOG /* watchdog */
|
|
#endif
|
|
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CFG_CMD_ASKENV | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_DIAG | \
|
|
CFG_CMD_ELF | \
|
|
CFG_CMD_I2C | \
|
|
CFG_CMD_IRQ | \
|
|
CFG_CMD_MII | \
|
|
CFG_CMD_NET | \
|
|
CFG_CMD_NFS | \
|
|
CFG_CMD_PCI | \
|
|
CFG_CMD_PING | \
|
|
CFG_CMD_REGINFO | \
|
|
CFG_CMD_SDRAM | \
|
|
CFG_CMD_FAT | \
|
|
CFG_CMD_EXT2 | \
|
|
CFG_CMD_USB )
|
|
|
|
#define CONFIG_SUPPORT_VFAT
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
|
#define CONFIG_LYNXKDI 1 /* support kdi files */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
/* General PCI */
|
|
#define CONFIG_PCI /* include pci support */
|
|
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
|
|
|
|
/* Board-specific PCI */
|
|
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
|
|
#define CFG_PCI_TARGET_INIT
|
|
#define CFG_PCI_MASTER_INIT
|
|
|
|
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
|
|
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
|
|
#define CFG_CACHELINE_SIZE 32 /* ... */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|
|
|