upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
160 lines
4.0 KiB
160 lines
4.0 KiB
/*
|
|
* (C) Copyright 2001-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
|
|
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
|
|
/* fpga configuration data - not compressed, generated by bin2c */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
int filesize = sizeof(fpgadata);
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(uicer, 0x00000000); /* disable all ints */
|
|
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
|
|
mtdcr(uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
|
*/
|
|
mtebc (epcr, 0xa8400000); /* ebc always driven */
|
|
|
|
/*
|
|
* Reset CPLD via GPIO12 (CS3) pin
|
|
*/
|
|
out32(GPIO0_OR, in32(GPIO0_OR) & ~(0x80000000 >> 12));
|
|
udelay(1000); /* wait 1ms */
|
|
out32(GPIO0_OR, in32(GPIO0_OR) | (0x80000000 >> 12));
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned char str[64];
|
|
int i = getenv_r ("serial#", str, sizeof(str));
|
|
int flashcnt;
|
|
int delay;
|
|
volatile unsigned char *led_reg = (unsigned char *)((ulong)CAN_BA + 0x1000);
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming VOM405");
|
|
} else {
|
|
puts(str);
|
|
}
|
|
|
|
printf(" (PLD-Version=%02d)\n", *led_reg);
|
|
|
|
/*
|
|
* Flash LEDs
|
|
*/
|
|
for (flashcnt = 0; flashcnt < 3; flashcnt++) {
|
|
*led_reg = 0x40; /* LED_B..D off */
|
|
for (delay = 0; delay < 100; delay++)
|
|
udelay(1000);
|
|
*led_reg = 0x47; /* LED_B..D on */
|
|
for (delay = 0; delay < 50; delay++)
|
|
udelay(1000);
|
|
}
|
|
*led_reg = 0x40;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
unsigned long val;
|
|
|
|
mtdcr(memcfga, mem_mb0cf);
|
|
val = mfdcr(memcfgd);
|
|
|
|
#if 0
|
|
printf("\nmb0cf=%x\n", val); /* test-only */
|
|
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
|
#endif
|
|
|
|
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_LXT971_NO_SLEEP
|
|
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
#endif
|
|
}
|
|
|