upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
108 lines
3.3 KiB
108 lines
3.3 KiB
/*
|
|
* SH7780 PCI Controller (PCIC) for U-Boot.
|
|
* (C) Dustin McIntire (dustin@sensoria.com)
|
|
* (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
* (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/io.h>
|
|
|
|
#define SH7780_VENDOR_ID 0x1912
|
|
#define SH7780_DEVICE_ID 0x0002
|
|
#define SH7780_PCICR_PREFIX 0xA5000000
|
|
#define SH7780_PCICR_PFCS 0x00000800
|
|
#define SH7780_PCICR_FTO 0x00000400
|
|
#define SH7780_PCICR_PFE 0x00000200
|
|
#define SH7780_PCICR_TBS 0x00000100
|
|
#define SH7780_PCICR_ARBM 0x00000040
|
|
#define SH7780_PCICR_IOCS 0x00000004
|
|
#define SH7780_PCICR_PRST 0x00000002
|
|
#define SH7780_PCICR_CFIN 0x00000001
|
|
|
|
#define p4_in(addr) (*(vu_long *)addr)
|
|
#define p4_out(data, addr) (*(vu_long *)addr) = (data)
|
|
#define p4_inw(addr) (*(vu_short *)addr)
|
|
#define p4_outw(data, addr) (*(vu_short *)addr) = (data)
|
|
|
|
int pci_sh4_read_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int offset, u32 *value)
|
|
{
|
|
u32 par_data = 0x80000000 | dev;
|
|
|
|
p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
|
|
*value = p4_in(SH7780_PCIPDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pci_sh4_write_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int offset, u32 value)
|
|
{
|
|
u32 par_data = 0x80000000 | dev;
|
|
|
|
p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
|
|
p4_out(value, SH7780_PCIPDR);
|
|
return 0;
|
|
}
|
|
|
|
int pci_sh7780_init(struct pci_controller *hose)
|
|
{
|
|
p4_out(0x01, SH7780_PCIECR);
|
|
|
|
if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
|
|
&& p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID) {
|
|
printf("PCI: Unknown PCI host bridge.\n");
|
|
return -1;
|
|
}
|
|
printf("PCI: SH7780 PCI host bridge found.\n");
|
|
|
|
/* Toggle PCI reset pin */
|
|
p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR);
|
|
udelay(100000);
|
|
p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR);
|
|
p4_outw(0x0047, SH7780_PCICMD);
|
|
|
|
p4_out(CONFIG_SH7780_PCI_LSR, SH7780_PCILSR0);
|
|
p4_out(CONFIG_SH7780_PCI_LAR, SH7780_PCILAR0);
|
|
p4_out(0x00000000, SH7780_PCILSR1);
|
|
p4_out(0, SH7780_PCILAR1);
|
|
p4_out(CONFIG_SH7780_PCI_BAR, SH7780_PCIMBAR0);
|
|
p4_out(0x00000000, SH7780_PCIMBAR1);
|
|
|
|
p4_out(0xFD000000, SH7780_PCIMBR0);
|
|
p4_out(0x00FC0000, SH7780_PCIMBMR0);
|
|
|
|
/* if use Operand Cache then enable PCICSCR Soonp bits. */
|
|
p4_out(0x08000000, SH7780_PCICSAR0);
|
|
p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */
|
|
|
|
p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM
|
|
| SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE),
|
|
SH7780_PCICR);
|
|
|
|
pci_sh4_init(hose);
|
|
return 0;
|
|
}
|
|
|