upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/ixp/npe/include/IxNpeMh.h

497 lines
20 KiB

/**
* @file IxNpeMh.h
*
* @date 14 Dec 2001
*
* @brief This file contains the public API for the IXP400 NPE Message
* Handler component.
*
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/**
* @defgroup IxNpeMh IXP400 NPE Message Handler (IxNpeMh) API
*
* @brief The public API for the IXP400 NPE Message Handler component.
*
* @{
*/
#ifndef IXNPEMH_H
#define IXNPEMH_H
#include "IxOsalTypes.h"
/*
* #defines for function return types, etc.
*/
#define IX_NPEMH_MIN_MESSAGE_ID (0x00) /**< minimum valid message ID */
#define IX_NPEMH_MAX_MESSAGE_ID (0xFF) /**< maximum valid message ID */
#define IX_NPEMH_SEND_RETRIES_DEFAULT (3) /**< default msg send retries */
/**
* @def IX_NPEMH_CRITICAL_NPE_ERR
*
* @brief NpeMH function return value for a Critical NPE error occuring during
sending/receiving message. Assume NPE hang / halt if this value is
returned.
*/
#define IX_NPEMH_CRITICAL_NPE_ERR 2
/**
* @enum IxNpeMhNpeId
*
* @brief The ID of a particular NPE.
* @note In this context, for IXP425 Silicon (B0):<br>
* - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.<br>
* - NPE-B has Ethernet Coprocessor.<br>
* - NPE-C has Ethernet, AES, DES and HASH Coprocessors.<br>
* - IXP400 Product Line have different combinations of coprocessors.
*/
typedef enum
{
IX_NPEMH_NPEID_NPEA = 0, /**< ID for NPE-A */
IX_NPEMH_NPEID_NPEB, /**< ID for NPE-B */
IX_NPEMH_NPEID_NPEC, /**< ID for NPE-C */
IX_NPEMH_NUM_NPES /**< Number of NPEs */
} IxNpeMhNpeId;
/**
* @enum IxNpeMhNpeInterrupts
*
* @brief Indicator specifying whether or not NPE interrupts should drive
* receiving of messages from the NPEs.
*/
typedef enum
{
IX_NPEMH_NPEINTERRUPTS_NO = 0, /**< Don't use NPE interrupts */
IX_NPEMH_NPEINTERRUPTS_YES /**< Do use NPE interrupts */
} IxNpeMhNpeInterrupts;
/**
* @brief The 2-word message structure to send to and receive from the
* NPEs.
*/
typedef struct
{
UINT32 data[2]; /**< the actual data of the message */
} IxNpeMhMessage;
/** message ID */
typedef UINT32 IxNpeMhMessageId;
/**
* @typedef IxNpeMhCallback
*
* @brief This prototype shows the format of a message callback function.
*
* This prototype shows the format of a message callback function. The
* message callback will be passed the message to be handled and will also
* be told from which NPE the message was received. The message callback
* will either be registered by ixNpeMhUnsolicitedCallbackRegister() or
* passed as a parameter to ixNpeMhMessageWithResponseSend(). It will be
* called from within an ISR triggered by the NPE's "outFIFO not empty"
* interrupt (see ixNpeMhInitialize()). The parameters passed are the ID
* of the NPE that the message was received from, and the message to be
* handled.<P><B>Re-entrancy:</B> This function is only a prototype, and
* will be implemented by the client. It does not need to be re-entrant.
*/
typedef void (*IxNpeMhCallback) (IxNpeMhNpeId, IxNpeMhMessage);
/*
* Prototypes for interface functions.
*/
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhInitialize (
IxNpeMhNpeInterrupts npeInterrupts)
*
* @brief This function will initialise the IxNpeMh component.
*
* @param npeInterrupts @ref IxNpeMhNpeInterrupts [in] - This parameter
* dictates whether or not the IxNpeMh component will service NPE "outFIFO
* not empty" interrupts to trigger receiving and processing of messages
* from the NPEs. If not then the client must use ixNpeMhMessagesReceive()
* to control message receiving and processing.
*
* This function will initialise the IxNpeMh component. It should only be
* called once, prior to using the IxNpeMh component. The following
* actions will be performed by this function:<OL><LI>Initialization of
* internal data structures (e.g. solicited and unsolicited callback
* tables).</LI><LI>Configuration of the interface with the NPEs (e.g.
* enabling of NPE "outFIFO not empty" interrupts).</LI><LI>Registration of
* ISRs that will receive and handle messages when the NPEs' "outFIFO not
* empty" interrupts fire (if npeInterrupts equals
* IX_NPEMH_NPEINTERRUPTS_YES).</LI></OL>
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhInitialize (
IxNpeMhNpeInterrupts npeInterrupts);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhUnload (void)
*
* @brief This function will uninitialise the IxNpeMh component.
*
* This function will uninitialise the IxNpeMh component. It should only be
* called once, and only if the IxNpeMh component has already been initialised.
* No other IxNpeMh API functions should be called until @ref ixNpeMhInitialize
* is called again.
* If possible, this function should be called before a soft reboot or unloading
* a kernel module to perform any clean up operations required for IxNpeMh.
*
* The following actions will be performed by this function:
* <OL><LI>Unmapping of kernel memory mapped by the function
* @ref ixNpeMhInitialize.</LI></OL>
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhUnload (void);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhUnsolicitedCallbackRegister (
IxNpeMhNpeId npeId,
IxNpeMhMessageId messageId,
IxNpeMhCallback unsolicitedCallback)
*
* @brief This function will register an unsolicited callback for a
* particular NPE and message ID.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages
* the unsolicited callback will handle.
* @param messageId @ref IxNpeMhMessageId [in] - The ID of the messages the
* unsolicited callback will handle.
* @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited
* callback function. A value of NULL will deregister any previously
* registered callback for this NPE and message ID.
*
* This function will register an unsolicited message callback for a
* particular NPE and message ID.<P>If an unsolicited callback is already
* registered for the specified NPE and message ID then the callback will
* be overwritten. Only one client will be responsible for handling a
* particular message ID associated with a NPE. Registering a NULL
* unsolicited callback will deregister any previously registered
* callback.<P>The callback function will be called from an ISR that will
* be triggered by the NPE's "outFIFO not empty" interrupt (see
* ixNpeMhInitialize()) to handle any unsolicited messages of the specific
* message ID received from the NPE. Unsolicited messages will be handled
* in the order they are received.<P>If no unsolicited callback can be
* found for a received message then it is assumed that the message is
* solicited.<P>If more than one client may be interested in a particular
* unsolicited message then the suggested strategy is to register a
* callback for the message that can itself distribute the message to
* multiple clients as necessary.<P>See also
* ixNpeMhUnsolicitedCallbackForRangeRegister().<P><B>Re-entrancy:</B> This
* function will be callable from any thread at any time. IxOsal
* will be used for any necessary resource protection.
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister (
IxNpeMhNpeId npeId,
IxNpeMhMessageId messageId,
IxNpeMhCallback unsolicitedCallback);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister (
IxNpeMhNpeId npeId,
IxNpeMhMessageId minMessageId,
IxNpeMhMessageId maxMessageId,
IxNpeMhCallback unsolicitedCallback)
*
* @brief This function will register an unsolicited callback for a
* particular NPE and range of message IDs.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages the
* unsolicited callback will handle.
* @param minMessageId @ref IxNpeMhMessageId [in] - The minimum message ID in
* the range of message IDs the unsolicited callback will handle.
* @param maxMessageId @ref IxNpeMhMessageId [in] - The maximum message ID in
* the range of message IDs the unsolicited callback will handle.
* @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited
* callback function. A value of NULL will deregister any previously
* registered callback(s) for this NPE and range of message IDs.
*
* This function will register an unsolicited callback for a particular NPE
* and range of message IDs. It is a convenience function that is
* effectively the same as calling ixNpeMhUnsolicitedCallbackRegister() for
* each ID in the specified range. See
* ixNpeMhUnsolicitedCallbackRegister() for more
* information.<P><B>Re-entrancy:</B> This function will be callable from
* any thread at any time. IxOsal will be used for any necessary
* resource protection.
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister (
IxNpeMhNpeId npeId,
IxNpeMhMessageId minMessageId,
IxNpeMhMessageId maxMessageId,
IxNpeMhCallback unsolicitedCallback);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhMessageSend (
IxNpeMhNpeId npeId,
IxNpeMhMessage message,
UINT32 maxSendRetries)
*
* @brief This function will send a message to a particular NPE.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message
* to.
* @param message @ref IxNpeMhMessage [in] - The message to send.
* @param maxSendRetries UINT32 [in] - Max num. of retries to perform
* if the NPE's inFIFO is full.
*
* This function will send a message to a particular NPE. It will be the
* client's responsibility to ensure that the message is properly formed.
* The return status will signify to the client if the message was
* successfully sent or not.<P>If the message is sent to the NPE then this
* function will return a status of success. Note that this will only mean
* the message has been placed in the NPE's inFIFO. There will be no way
* of knowing that the NPE has actually read the message, but once in the
* incoming message queue it will be safe to assume that the NPE will
* process it.
* <P>The inFIFO may fill up sometimes if the Xscale is sending messages
* faster than the NPE can handle them. This forces us to retry attempts
* to send the message until the NPE services the inFIFO. The client should
* specify a ceiling value for the number of retries suitable to their
* needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for
* the <i>maxSendRetries</i> parameter for this function. Each retry
* exceeding this default number will incur a blocking delay of 1 microsecond,
* to avoid consuming too much AHB bus bandwidth while performing retries.
* <P>Note this function <B>must</B> only be used for messages.
* that do not solicit responses. If the message being sent will solicit a
* response then the ixNpeMhMessageWithResponseSend() function <B>must</B>
* be used to ensure that the response is correctly
* handled. <P> This function will return timeout status if NPE hang / halt
* while sending message. The timeout error is not related to the
* <i>maxSendRetries</i> as mentioned above. The timeout error will only occur
* if the first word of the message has been sent to NPE (not exceeding
* <i>maxSendRetries</i> when sending 1st message word), but the second word of
* the message can't be written to NPE's inFIFO due to NPE hang / halt after
* maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES).
* <P><B>Re-entrancy:</B> This function will be callable from any
* thread at any time. IxOsal will be used for any necessary
* resource protection.
*
* @return The function returns a status indicating success, failure or timeout.
*/
PUBLIC IX_STATUS ixNpeMhMessageSend (
IxNpeMhNpeId npeId,
IxNpeMhMessage message,
UINT32 maxSendRetries);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhMessageWithResponseSend (
IxNpeMhNpeId npeId,
IxNpeMhMessage message,
IxNpeMhMessageId solicitedMessageId,
IxNpeMhCallback solicitedCallback,
UINT32 maxSendRetries)
*
* @brief This function is equivalent to the ixNpeMhMessageSend() function,
* but must be used when the message being sent will solicited a response.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message
* to.
* @param message @ref IxNpeMhMessage [in] - The message to send.
* @param solicitedMessageId @ref IxNpeMhMessageId [in] - The ID of the
* solicited response message.
* @param solicitedCallback @ref IxNpeMhCallback [in] - The function to use to
* pass the response message back to the client. A value of NULL will
* cause the response message to be discarded.
* @param maxSendRetries UINT32 [in] - Max num. of retries to perform
* if the NPE's inFIFO is full.
*
* This function is equivalent to the ixNpeMhMessageSend() function, but
* must be used when the message being sent will solicited a
* response.<P>The client must specify the ID of the solicited response
* message to allow the response to be recognised when it is received. The
* client must also specify a callback function to handle the received
* response. The IxNpeMh component will not offer the facility to send a
* message to a NPE and receive a response within the same context.<P>Note
* if the client is not interested in the response, specifying a NULL
* callback will cause the response message to be discarded.<P>The
* solicited callback will be stored and called some time later from an ISR
* that will be triggered by the NPE's "outFIFO not empty" interrupt (see
* ixNpeMhInitialize()) to handle the response message corresponding to the
* message sent. Response messages will be handled in the order they are
* received.<P>
* <P>The inFIFO may fill up sometimes if the Xscale is sending messages
* faster than the NPE can handle them. This forces us to retry attempts
* to send the message until the NPE services the inFIFO. The client should
* specify a ceiling value for the number of retries suitable to their
* needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for
* the <i>maxSendRetries</i> parameter for this function. Each retry
* exceeding this default number will incur a blocking delay of 1 microsecond,
* to avoid consuming too much AHB bus bandwidth while performing retries.
* <P> This function will return timeout status if NPE hang / halt
* while sending message. The timeout error is not related to the
* <i>maxSendRetries</i> as mentioned above. The timeout error will only occur
* if the first word of the message has been sent to NPE (not exceeding
* <i>maxSendRetries</i> when sending 1st message word), but the second word of
* the message can't be written to NPE's inFIFO due to NPE hang / halt after
* maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES).
* <P><B>Re-entrancy:</B> This function will be callable from any
* thread at any time. IxOsal will be used for any necessary
* resource protection.
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend (
IxNpeMhNpeId npeId,
IxNpeMhMessage message,
IxNpeMhMessageId solicitedMessageId,
IxNpeMhCallback solicitedCallback,
UINT32 maxSendRetries);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhMessagesReceive (
IxNpeMhNpeId npeId)
*
* @brief This function will receive messages from a particular NPE and
* pass each message to the client via a solicited callback (for solicited
* messages) or an unsolicited callback (for unsolicited messages).
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to receive and
* process messages from.
*
* This function will receive messages from a particular NPE and pass each
* message to the client via a solicited callback (for solicited messages)
* or an unsolicited callback (for unsolicited messages).<P>If the IxNpeMh
* component is initialised to service NPE "outFIFO not empty" interrupts
* (see ixNpeMhInitialize()) then there is no need to call this function.
* This function is only provided as an alternative mechanism to control
* the receiving and processing of messages from the NPEs.<P> This function
* will return timeout status if NPE hang / halt while receiving message. The
* timeout error will only occur if this function has read the first word of
* the message and can't read second word of the message from NPE's outFIFO
* after maximum retries (IX_NPE_MH_MAX_NUM_OF_RETRIES).
* <P>Note this function cannot be called from within
* an ISR as it will use resource protection mechanisms.<P><B>Re-entrancy:</B>
* This function will be callable from any thread at any time. IxOsal will be
* used for any necessary resource protection.
*
* @return The function returns a status indicating success, failure or timeout.
*/
PUBLIC IX_STATUS ixNpeMhMessagesReceive (
IxNpeMhNpeId npeId);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhShow (
IxNpeMhNpeId npeId)
*
* @brief This function will display the current state of the IxNpeMh
* component.
*
* <B>Re-entrancy:</B> This function will be callable from
* any thread at any time. However, no resource protection will be used
* so as not to impact system performance. As this function is only
* reading statistical information then this is acceptable.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to display state
* information for.
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhShow (
IxNpeMhNpeId npeId);
/**
* @ingroup IxNpeMh
*
* @fn IX_STATUS ixNpeMhShowReset (
IxNpeMhNpeId npeId)
*
* @brief This function will reset the current state of the IxNpeMh
* component.
*
* <B>Re-entrancy:</B> This function will be callable from
* any thread at any time. However, no resource protection will be used
* so as not to impact system performance. As this function is only
* writing statistical information then this is acceptable.
*
* @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to reset state
* information for.
*
* @return The function returns a status indicating success or failure.
*/
PUBLIC IX_STATUS ixNpeMhShowReset (
IxNpeMhNpeId npeId);
#endif /* IXNPEMH_H */
/**
* @} defgroup IxNpeMh
*/