upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
338 lines
8.0 KiB
338 lines
8.0 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
|
|
* Flash driver for armadillo board HT1070
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#define FLASH_BANK_SIZE 0x400000
|
|
|
|
/*value used by hermit is 0x200*/
|
|
/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
|
|
#define MAIN_SECT_SIZE 0x10000
|
|
|
|
#define UNALIGNED_MASK (3)
|
|
#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
|
|
#define FLASH_TIMEOUT 20000000
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
ulong flash_init (void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
|
|
flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
|
|
/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
|
|
memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
|
|
if (i == 0)
|
|
flashbase = PHYS_FLASH_1;
|
|
else
|
|
panic ("configured too many flash banks!\n");
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
flash_info[i].start[j] =
|
|
flashbase + j * MAIN_SECT_SIZE;
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
/* Protect monitor and environment sectors
|
|
*/
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_FLASH_BASE,
|
|
CFG_FLASH_BASE + monitor_flash_len - 1,
|
|
&flash_info[0]);
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case (FUJ_MANUFACT & FLASH_VENDMASK):
|
|
printf ("Fujitsu: ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
/*
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
|
|
printf ("28F128J3 (128Mbit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
goto Done;
|
|
break;
|
|
}
|
|
*/
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf (" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
|
|
/*
|
|
Done: ;
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* * Loop until both write state machines complete.
|
|
* */
|
|
static unsigned short flash_status_wait (unsigned long addr,
|
|
unsigned short value)
|
|
{
|
|
unsigned short status;
|
|
long timeout = FLASH_TIMEOUT;
|
|
|
|
while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
|
|
timeout--;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Loop until the Write State machine is ready, then do a full error
|
|
* check. Clear status and leave the flash in Read Array mode; return
|
|
* 0 for no error, -1 for error.
|
|
*/
|
|
static int flash_status_full_check (unsigned long addr, unsigned short value1,
|
|
unsigned short value2)
|
|
{
|
|
unsigned short status1, status2;
|
|
|
|
status1 = flash_status_wait (addr, value1);
|
|
status2 = flash_status_wait (addr + 2, value2);
|
|
return (status1 != value1 || status2 != value2) ? -1 : 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int flag, prot, sect;
|
|
int rc = ERR_OK;
|
|
unsigned long base;
|
|
unsigned long addr;
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) !=
|
|
(FUJ_MANUFACT & FLASH_VENDMASK)) {
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot)
|
|
return ERR_PROTECTED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
printf ("Erasing %d sectors starting at sector %2d.\n"
|
|
"This make take some time ... ",
|
|
s_last - s_first, sect);
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
|
|
/* ARM simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
|
|
addr = sect * MAIN_SECT_SIZE;
|
|
addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */
|
|
base = addr & 0xF0000000;
|
|
|
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
|
FL_WORD (base + (0x555 << 1)) = 0x80;
|
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
|
FL_WORD (addr) = 0x30;
|
|
if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
|
|
return ERR_PROTECTED;
|
|
}
|
|
}
|
|
printf ("\nDone.\n");
|
|
if (ctrlc ())
|
|
printf ("User Interrupt!\n");
|
|
|
|
/* allow flash to settle - wait 10 ms */
|
|
udelay_masked (10000);
|
|
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash
|
|
*/
|
|
|
|
static int write_word (flash_info_t * info, ulong dest, ushort data)
|
|
{
|
|
int flag;
|
|
unsigned long base;
|
|
|
|
/* Check if Flash is (sufficiently) erased
|
|
*/
|
|
if ((FL_WORD (dest) & data) != data)
|
|
return ERR_NOT_ERASED;
|
|
|
|
/*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
|
|
base = dest & 0xF0000000;
|
|
FL_WORD (base + (0x555 << 1)) = 0xAA;
|
|
FL_WORD (base + (0x2AA << 1)) = 0x55;
|
|
FL_WORD (base + (0x555 << 1)) = 0xA0;
|
|
FL_WORD (dest) = data;
|
|
/*printf("writing 0x%p = 0x%x\n",dest,data); */
|
|
if (flash_status_wait (dest, data) != data)
|
|
return ERR_PROG_ERROR;
|
|
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash.
|
|
*/
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp;
|
|
ushort data;
|
|
int l;
|
|
int i, rc;
|
|
|
|
wp = (addr & ~1); /* get lower word aligned address */
|
|
printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
for (; i < 2 && cnt > 0; ++i) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt == 0 && i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 2;
|
|
}
|
|
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
while (cnt >= 2) {
|
|
data = *((vu_short *) src);
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 2;
|
|
wp += 2;
|
|
cnt -= 2;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
printf ("\nDone.\n");
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
}
|
|
for (; i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
return write_word (info, wp, data);
|
|
}
|
|
|