upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/MAI/bios_emulator/scitech/include/pmint.h

211 lines
8.0 KiB

/****************************************************************************
*
* SciTech OS Portability Manager Library
*
* ========================================================================
*
* The contents of this file are subject to the SciTech MGL Public
* License Version 1.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.scitechsoft.com/mgl-license.txt
*
* Software distributed under the License is distributed on an
* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
*
* The Initial Developer of the Original Code is SciTech Software, Inc.
* All Rights Reserved.
*
* ========================================================================
*
* Language: ANSI C
* Environment: Real mode and 16/32 bit Protected Mode
*
* Description: Header file for the interrupt handling extensions to the OS
* Portability Manager Library. These extensions includes
* simplified interrupt handling, allowing all common interrupt
* handlers to be hooked and handled directly with normal C
* functions, both in 16 bit and 32 bit modes. Note however that
* simplified handling does not mean slow performance! All low
* level interrupt handling is done efficiently in assembler
* for speed (well actually necessary to insulate the
* application from the lack of far pointers in 32 bit PM). The
* interrupt handlers currently supported are:
*
* Mouse (0x33 callback)
* Timer Tick (0x8)
* Keyboard (0x9 and 0x15)
* Control C/Break (0x23/0x1B)
* Critical Error (0x24)
*
****************************************************************************/
#ifndef __PMINT_H
#define __PMINT_H
/*--------------------------- Macros and Typedefs -------------------------*/
#ifdef __SMX32__
/* PC interrupts (Ensure consistent with pme.inc) */
#define PM_IRQ0 0x40
#define PM_IRQ1 (PM_IRQ0+1)
#define PM_IRQ6 (PM_IRQ0+6)
#define PM_IRQ14 (PM_IRQ0+14)
#endif
/* Define the different types of interrupt handlers that we support */
typedef uint (PMAPIP PM_criticalHandler)(uint axValue,uint diValue);
typedef void (PMAPIP PM_breakHandler)(uint breakHit);
typedef short (PMAPIP PM_key15Handler)(short scanCode);
typedef void (PMAPIP PM_mouseHandler)(uint event, uint butstate,int x,int y,int mickeyX,int mickeyY);
/* Create a type for representing far pointers in both 16 and 32 bit
* protected mode.
*/
#ifdef PM386
typedef struct {
long off;
short sel;
} PMFARPTR;
#define PMNULL {0,0}
#else
typedef void *PMFARPTR;
#define PMNULL NULL
#endif
/*--------------------------- Function Prototypes -------------------------*/
#ifdef __cplusplus
extern "C" { /* Use "C" linkage when in C++ mode */
#endif
/* Routine to load save default data segment selector value into a code
* segment variable, and another to load the value into the DS register.
*/
void PMAPI PM_loadDS(void);
void PMAPI PM_saveDS(void);
/* Routine to install a mouse interrupt handling routine. The
* mouse handler routine is a normal C function, and the PM library
* will take care of passing the correct parameters to the function,
* and switching to a local stack.
*
* Note that you _must_ lock the memory containing the mouse interrupt
* handler with the PM_lockPages() function otherwise you may encounter
* problems in virtual memory environments.
*/
int PMAPI PM_setMouseHandler(int mask,PM_mouseHandler mh);
void PMAPI PM_restoreMouseHandler(void);
/* Routine to reset the mouse driver, and re-install the current
* mouse interrupt handler if one was currently installed (since the
* mouse reset will automatically remove this handler.
*/
void PMAPI PM_resetMouseDriver(int hardReset);
/* Routine to reset the mouse driver, and re-install the current
* mouse interrupt handler if one was currently installed (since the
* mouse reset will automatically remove this handler.
*/
void PMAPI PM_resetMouseDriver(int hardReset);
/* Routines to install and remove timer interrupt handlers.
*
* Note that you _must_ lock the memory containing the interrupt
* handlers with the PM_lockPages() function otherwise you may encounter
* problems in virtual memory environments.
*/
void PMAPI PM_setTimerHandler(PM_intHandler ih);
void PMAPI PM_chainPrevTimer(void);
void PMAPI PM_restoreTimerHandler(void);
/* Routines to install and keyboard interrupt handlers.
*
* Note that you _must_ lock the memory containing the interrupt
* handlers with the PM_lockPages() function otherwise you may encounter
* problems in virtual memory environments.
*/
void PMAPI PM_setKeyHandler(PM_intHandler ih);
void PMAPI PM_chainPrevKey(void);
void PMAPI PM_restoreKeyHandler(void);
/* Routines to hook and unhook the alternate Int 15h keyboard intercept
* callout routine. Your event handler will need to return the following:
*
* scanCode - Let the BIOS process scan code (chains to previous handler)
* 0 - You have processed the scan code so flush from BIOS
*
* Note that this is not available under all DOS extenders, but does
* work under real mode, DOS4GW and X32-VM. It does not work under the
* PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
*/
void PMAPI PM_setKey15Handler(PM_key15Handler ih);
void PMAPI PM_restoreKey15Handler(void);
/* Routines to install and remove the control c/break interrupt handlers.
* Interrupt handling is performed by the PM/Pro library, and you can call
* the supplied routines to test the status of the Ctrl-C and Ctrl-Break
* flags. If you pass the value TRUE for 'clearFlag' to these routines,
* the internal flags will be reset in order to catch another Ctrl-C or
* Ctrl-Break interrupt.
*/
void PMAPI PM_installBreakHandler(void);
int PMAPI PM_ctrlCHit(int clearFlag);
int PMAPI PM_ctrlBreakHit(int clearFlag);
void PMAPI PM_restoreBreakHandler(void);
/* Routine to install an alternate break handler that will call your
* code directly. This is not available under all DOS extenders, but does
* work under real mode, DOS4GW and X32-VM. It does not work under the
* PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
*
* Note that you should either install one or the other, but not both!
*/
void PMAPI PM_installAltBreakHandler(PM_breakHandler bh);
/* Routines to install and remove the critical error handler. The interrupt
* is handled by the PM/Pro library, and the operation will always be failed.
* You can check the status of the critical error handler with the
* appropriate function. If you pass the value TRUE for 'clearFlag', the
* internal flag will be reset ready to catch another critical error.
*/
void PMAPI PM_installCriticalHandler(void);
int PMAPI PM_criticalError(int *axValue, int *diValue, int clearFlag);
void PMAPI PM_restoreCriticalHandler(void);
/* Routine to install an alternate critical handler that will call your
* code directly. This is not available under all DOS extenders, but does
* work under real mode, DOS4GW and X32-VM. It does not work under the
* PowerPack 32 bit DOS extenders. If you figure out how to do it let us know!
*
* Note that you should either install one or the other, but not both!
*/
void PMAPI PM_installAltCriticalHandler(PM_criticalHandler);
/* Functions to manage protected mode only interrupt handlers */
void PMAPI PM_getPMvect(int intno, PMFARPTR *isr);
void PMAPI PM_setPMvect(int intno, PM_intHandler ih);
void PMAPI PM_restorePMvect(int intno, PMFARPTR isr);
#ifdef __cplusplus
} /* End of "C" linkage for C++ */
#endif
#endif /* __PMINT_H */