upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-tegra/ap.h

106 lines
3.8 KiB

/*
* (C) Copyright 2010-2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/types.h>
/* Stabilization delays, in usec */
#define PLL_STABILIZATION_DELAY (300)
#define IO_STABILIZATION_DELAY (1000)
#define NVBL_PLLP_KHZ (216000)
#define PLLX_ENABLED (1 << 30)
#define CCLK_BURST_POLICY 0x20008888
#define SUPER_CCLK_DIVIDER 0x80000000
/* Calculate clock fractional divider value from ref and target frequencies */
#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2)
/* Calculate clock frequency value from reference and clock divider value */
#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2))
/* AVP/CPU ID */
#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */
#define PG_UP_TAG_0 0x0
#define CORESIGHT_UNLOCK 0xC5ACCE55;
/* AP20-Specific Base Addresses */
/* AP20 Base physical address of SDRAM. */
#define AP20_BASE_PA_SDRAM 0x00000000
/* AP20 Base physical address of internal SRAM. */
#define AP20_BASE_PA_SRAM 0x40000000
/* AP20 Size of internal SRAM (256KB). */
#define AP20_BASE_PA_SRAM_SIZE 0x00040000
/* AP20 Base physical address of flash. */
#define AP20_BASE_PA_NOR_FLASH 0xD0000000
/* AP20 Base physical address of boot information table. */
#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM
/*
* Super-temporary stacks for EXTREMELY early startup. The values chosen for
* these addresses must be valid on ALL SOCs because this value is used before
* we are able to differentiate between the SOC types.
*
* NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its
* stack is placed below the AVP stack. Once the CPU stack has been moved,
* the AVP is free to use the IRAM the CPU stack previously occupied if
* it should need to do so.
*
* NOTE: In multi-processor CPU complex configurations, each processor will have
* its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a
* limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a
* stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous
* CPU.
*/
/* Common AVP early boot stack limit */
#define AVP_EARLY_BOOT_STACK_LIMIT \
(AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2))
/* Common AVP early boot stack size */
#define AVP_EARLY_BOOT_STACK_SIZE 0x1000
/* Common CPU early boot stack limit */
#define CPU_EARLY_BOOT_STACK_LIMIT \
(AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE)
/* Common CPU early boot stack size */
#define CPU_EARLY_BOOT_STACK_SIZE 0x1000
#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100)
#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0)
#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0)
#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4)
#define FLOW_MODE_STOP 2
#define HALT_COP_EVENT_JTAG (1 << 28)
#define HALT_COP_EVENT_IRQ_1 (1 << 11)
#define HALT_COP_EVENT_FIQ_1 (1 << 9)
/* This is the main entry into U-Boot, used by the Cortex-A9 */
extern void _start(void);
/**
* Works out the SOC type used for clocks settings
*
* @return SOC type - see TEGRA_SOC...
*/
int tegra_get_chip_type(void);