upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
369 lines
11 KiB
369 lines
11 KiB
/*
|
|
* (C) Copyright 2006-2009
|
|
* Texas Instruments Incorporated.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
* Nishanth Menon <nm@ti.com>
|
|
*
|
|
* Configuration settings for the 3430 TI SDP3430 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* TODO: REMOVE THE FOLLOWING
|
|
* Retained the following till size.h is removed in u-boot
|
|
*/
|
|
#include <asm/sizes.h>
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
|
|
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
|
|
#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
|
|
|
|
#include <asm/arch/cpu.h> /* get chip and board defs */
|
|
#include <asm/arch/omap3.h>
|
|
|
|
/*
|
|
* NOTE: these #defines presume standard SDP jumper settings.
|
|
* In particular:
|
|
* - 26 MHz clock (not 19.2 or 38.4 MHz)
|
|
* - Boot from 128MB NOR, not NAND or OneNAND
|
|
*
|
|
* At this writing, OMAP3 U-Boot support doesn't permit concurrent
|
|
* support for all the flash types the board supports.
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 26000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK >> 1)
|
|
|
|
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
* Total Size Environment - 256k
|
|
* Malloc - add 256k
|
|
*/
|
|
#define CONFIG_ENV_SIZE (256 << 10)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
|
|
/* initial data */
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* TWL4030
|
|
*/
|
|
#define CONFIG_TWL4030_POWER 1
|
|
|
|
/*
|
|
* serial port - NS16550 compatible
|
|
*/
|
|
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
|
|
/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
|
|
* swapped with UART2 via jumpering. Downsides of using J8: it doesn't
|
|
* support UART boot (that's only for UART3); it prevents sharing a Linux
|
|
* kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
|
|
*
|
|
* UART boot uses UART3 on J9, and the SDP user's guide says to use
|
|
* that for console. Downsides of using J9: you can't use IRDA too;
|
|
* since UART3 isn't in the CORE power domain, it may be a bit less
|
|
* usable in certain PM-sensitive debug scenarios.
|
|
*/
|
|
#undef CONSOLE_J9 /* else J8/UART1 (innermost) */
|
|
|
|
#ifdef CONSOLE_J9
|
|
#define CONFIG_CONS_INDEX 3
|
|
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
|
#define CONFIG_SERIAL3 3 /* UART3 */
|
|
#else
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
|
#define CONFIG_SERIAL1 1 /* UART1 */
|
|
#endif
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
|
115200}
|
|
|
|
/*
|
|
* I2C for power management setup
|
|
*/
|
|
#define CONFIG_HARD_I2C 1
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 1
|
|
#define CONFIG_SYS_I2C_BUS 0
|
|
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
|
#define CONFIG_DRIVER_OMAP34XX_I2C 1
|
|
|
|
/* OMITTED: single 1 Gbit MT29F1G NAND flash */
|
|
|
|
/*
|
|
* NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE 0x10000000
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
|
|
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH 2
|
|
#define PHYS_FLASH_SIZE (128 << 20)
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */
|
|
|
|
/* timeout values are in milliseconds */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
|
|
|
|
/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10)
|
|
#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* commands to include */
|
|
#include <config_cmd_default.h>
|
|
|
|
/* Enabled commands */
|
|
#define CONFIG_CMD_DHCP /* DHCP Support */
|
|
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
|
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
|
#define CONFIG_CMD_MMC /* MMC support */
|
|
#define CONFIG_CMD_NET
|
|
|
|
/* Disabled commands */
|
|
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/*
|
|
* MMC boot support
|
|
*/
|
|
|
|
#if defined(CONFIG_CMD_MMC)
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_OMAP3_MMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* SMSC9115 Ethernet from SMSC9118 family
|
|
*----------------------------------------------------------------------------
|
|
*/
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
#define CONFIG_DRIVER_LAN91C96
|
|
#define CONFIG_LAN91C96_BASE DEBUG_BASE
|
|
#define CONFIG_LAN91C96_EXT_PHY
|
|
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
/*
|
|
* BOOTP fields
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
|
|
#define CONFIG_BOOTP_GATEWAY 0x00000002
|
|
#define CONFIG_BOOTP_HOSTNAME 0x00000004
|
|
#define CONFIG_BOOTP_BOOTPATH 0x00000010
|
|
#endif /* (CONFIG_CMD_NET) */
|
|
|
|
/*
|
|
* Environment setup
|
|
*
|
|
* Default boot order: mmc bootscript, MMC uImage, NOR image.
|
|
* Network booting environment must be configured at site.
|
|
*/
|
|
|
|
/* allow overwriting serial config and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x82000000\0" \
|
|
"console=ttyS0,115200n8\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mmcblk0p2 rw " \
|
|
"rootfstype=ext3 rootwait\0" \
|
|
"norargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mtdblock3 rw " \
|
|
"rootfstype=jffs2\0" \
|
|
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from MMC/SD ...; " \
|
|
"autoscr ${loadaddr}\0" \
|
|
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from MMC/SD ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"norboot=echo Booting from NOR ...; " \
|
|
"run norargs; " \
|
|
"bootm 0x80000\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if mmcinit; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"else run norboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else run norboot; fi"
|
|
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define V_PROMPT "OMAP34XX SDP # "
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_PROMPT V_PROMPT
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
|
|
/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
|
|
* a basic sanity check ONLY
|
|
* IF you would like to increase coverage, increase the end address
|
|
* or run the test with custom options
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
|
|
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20))
|
|
|
|
/* Default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
|
|
* 32KHz clk, or from external sig. This rate is divided by a local divisor.
|
|
*/
|
|
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* SDRAM Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
|
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
|
#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */
|
|
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
|
|
|
/* SDRAM Bank Allocation method */
|
|
#define SDRC_R_B_C 1
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* NOR FLASH usage ... default nCS0:
|
|
* - one 256KB sector for U-Boot
|
|
* - one 256KB sector for its parameters (not all used)
|
|
* - eight sectors (2 MB) for kernel
|
|
* - rest for JFFS2
|
|
*/
|
|
|
|
/* Monitor at start of flash */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
|
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
|
|
|
/*
|
|
* NAND FLASH usage ... default nCS1:
|
|
* - four 128KB sectors for X-Loader
|
|
* - four 128KB sectors for U-Boot
|
|
* - two 128KB sector for its parameters
|
|
* - 32 sectors (4 MB) for kernel
|
|
* - rest for filesystem
|
|
*/
|
|
|
|
/*
|
|
* OneNAND FLASH usage ... default nCS2:
|
|
* - four 128KB sectors for X-Loader
|
|
* - two 128KB sectors for U-Boot
|
|
* - one 128KB sector for its parameters
|
|
* - sixteen sectors (2 MB) for kernel
|
|
* - rest for filesystem
|
|
*/
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern struct gpmc *gpmc_cfg;
|
|
extern unsigned int boot_flash_base;
|
|
extern volatile unsigned int boot_flash_env_addr;
|
|
extern unsigned int boot_flash_off;
|
|
extern unsigned int boot_flash_sec;
|
|
extern unsigned int boot_flash_type;
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|
|
|