upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
396 lines
11 KiB
396 lines
11 KiB
/*
|
|
* (C) Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx5x_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <asm/gpio.h>
|
|
#include <mc13892.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
/* UART1 RXD */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
|
|
|
|
/* UART1 TXD */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
}
|
|
|
|
static void setup_i2c(unsigned int port_number)
|
|
{
|
|
switch (port_number) {
|
|
case 0:
|
|
/* i2c1 SDA */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D8,
|
|
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
/* i2c1 SCL */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D9,
|
|
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
break;
|
|
case 1:
|
|
/* i2c2 SDA */
|
|
mxc_request_iomux(MX53_PIN_KEY_ROW3,
|
|
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_KEY_ROW3,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
|
|
/* i2c2 SCL */
|
|
mxc_request_iomux(MX53_PIN_KEY_COL3,
|
|
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_KEY_COL3,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
break;
|
|
default:
|
|
printf("Warning: Wrong I2C port number\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
void power_init(void)
|
|
{
|
|
unsigned int val;
|
|
struct pmic *p;
|
|
|
|
pmic_init();
|
|
p = get_pmic();
|
|
|
|
/* Set VDDA to 1.25V */
|
|
pmic_reg_read(p, REG_SW_2, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_25;
|
|
pmic_reg_write(p, REG_SW_2, val);
|
|
|
|
/*
|
|
* Need increase VCC and VDDA to 1.3V
|
|
* according to MX53 IC TO2 datasheet.
|
|
*/
|
|
if (is_soc_rev(CHIP_REV_2_0) == 0) {
|
|
/* Set VCC to 1.3V for TO2 */
|
|
pmic_reg_read(p, REG_SW_1, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_30;
|
|
pmic_reg_write(p, REG_SW_1, val);
|
|
|
|
/* Set VDDA to 1.3V for TO2 */
|
|
pmic_reg_read(p, REG_SW_2, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_30;
|
|
pmic_reg_write(p, REG_SW_2, val);
|
|
}
|
|
}
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
/*FEC_MDIO*/
|
|
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
|
|
|
|
/*FEC_MDC*/
|
|
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC RXD1 */
|
|
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC RXD0 */
|
|
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC TXD1 */
|
|
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TXD0 */
|
|
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TX_EN */
|
|
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TX_CLK */
|
|
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC RX_ER */
|
|
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC CRS */
|
|
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg[2] = {
|
|
{MMC_SDHC1_BASE_ADDR},
|
|
{MMC_SDHC3_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret;
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(IMX_GPIO_NR(3, 11));
|
|
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(IMX_GPIO_NR(3, 13));
|
|
|
|
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
|
ret = !gpio_get_value(IMX_GPIO_NR(3, 13));
|
|
else
|
|
ret = !gpio_get_value(IMX_GPIO_NR(3, 11));
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
u32 index;
|
|
s32 status = 0;
|
|
|
|
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
|
|
switch (index) {
|
|
case 0:
|
|
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA0,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA1,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA2,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA3,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_EIM_DA13,
|
|
IOMUX_CONFIG_ALT1);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
break;
|
|
case 1:
|
|
mxc_request_iomux(MX53_PIN_ATA_RESET_B,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_IORDY,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA8,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA9,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA10,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA11,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA0,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA1,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA2,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA3,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_EIM_DA11,
|
|
IOMUX_CONFIG_ALT1);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more ESDHC controller"
|
|
"(%d) as supported by the board(2)\n",
|
|
CONFIG_SYS_FSL_ESDHC_NUM);
|
|
return status;
|
|
}
|
|
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
setup_iomux_fec();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
/* 4 bit bus width */
|
|
{"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
|
|
{"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
setup_i2c(1);
|
|
power_init();
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: MX53EVK\n");
|
|
|
|
return 0;
|
|
}
|
|
|