upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
333 lines
9.9 KiB
333 lines
9.9 KiB
/*
|
|
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
|
|
* Author: Eric Gao <eric.gao@rock-chips.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <display.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <panel.h>
|
|
#include <regmap.h>
|
|
#include "rk_mipi.h"
|
|
#include <syscon.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <linux/kernel.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cru_rk3399.h>
|
|
#include <asm/arch/grf_rk3399.h>
|
|
#include <asm/arch/rockchip_mipi_dsi.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int rk_mipi_read_timing(struct udevice *dev,
|
|
struct display_timing *timing)
|
|
{
|
|
int ret;
|
|
|
|
ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(dev),
|
|
0, timing);
|
|
if (ret) {
|
|
debug("%s: Failed to decode display timing (ret=%d)\n",
|
|
__func__, ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Register write function used only for mipi dsi controller.
|
|
* Parameter:
|
|
* @regs: mipi controller address
|
|
* @reg: combination of regaddr(16bit)|bitswidth(8bit)|offset(8bit) you can
|
|
* use define in rk_mipi.h directly for this parameter
|
|
* @val: value that will be write to specified bits of register
|
|
*/
|
|
static void rk_mipi_dsi_write(uintptr_t regs, u32 reg, u32 val)
|
|
{
|
|
u32 dat;
|
|
u32 mask;
|
|
u32 offset = (reg >> OFFSET_SHIFT) & 0xff;
|
|
u32 bits = (reg >> BITS_SHIFT) & 0xff;
|
|
uintptr_t addr = (reg >> ADDR_SHIFT) + regs;
|
|
|
|
/* Mask for specifiled bits,the corresponding bits will be clear */
|
|
mask = ~((0xffffffff << offset) & (0xffffffff >> (32 - offset - bits)));
|
|
|
|
/* Make sure val in the available range */
|
|
val &= ~(0xffffffff << bits);
|
|
|
|
/* Get register's original val */
|
|
dat = readl(addr);
|
|
|
|
/* Clear specified bits */
|
|
dat &= mask;
|
|
|
|
/* Fill specified bits */
|
|
dat |= val << offset;
|
|
|
|
writel(dat, addr);
|
|
}
|
|
|
|
int rk_mipi_dsi_enable(struct udevice *dev,
|
|
const struct display_timing *timing)
|
|
{
|
|
int node, timing_node;
|
|
int val;
|
|
struct rk_mipi_priv *priv = dev_get_priv(dev);
|
|
uintptr_t regs = priv->regs;
|
|
u32 txbyte_clk = priv->txbyte_clk;
|
|
u32 txesc_clk = priv->txesc_clk;
|
|
|
|
txesc_clk = txbyte_clk/(txbyte_clk/txesc_clk + 1);
|
|
|
|
/* Set Display timing parameter */
|
|
rk_mipi_dsi_write(regs, VID_HSA_TIME, timing->hsync_len.typ);
|
|
rk_mipi_dsi_write(regs, VID_HBP_TIME, timing->hback_porch.typ);
|
|
rk_mipi_dsi_write(regs, VID_HLINE_TIME, (timing->hsync_len.typ
|
|
+ timing->hback_porch.typ + timing->hactive.typ
|
|
+ timing->hfront_porch.typ));
|
|
rk_mipi_dsi_write(regs, VID_VSA_LINES, timing->vsync_len.typ);
|
|
rk_mipi_dsi_write(regs, VID_VBP_LINES, timing->vback_porch.typ);
|
|
rk_mipi_dsi_write(regs, VID_VFP_LINES, timing->vfront_porch.typ);
|
|
rk_mipi_dsi_write(regs, VID_ACTIVE_LINES, timing->vactive.typ);
|
|
|
|
/* Set Signal Polarity */
|
|
val = (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) ? 1 : 0;
|
|
rk_mipi_dsi_write(regs, HSYNC_ACTIVE_LOW, val);
|
|
|
|
val = (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) ? 1 : 0;
|
|
rk_mipi_dsi_write(regs, VSYNC_ACTIVE_LOW, val);
|
|
|
|
val = (timing->flags & DISPLAY_FLAGS_DE_LOW) ? 1 : 0;
|
|
rk_mipi_dsi_write(regs, DISPLAY_FLAGS_DE_LOW, val);
|
|
|
|
val = (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) ? 1 : 0;
|
|
rk_mipi_dsi_write(regs, COLORM_ACTIVE_LOW, val);
|
|
|
|
/* Set video mode */
|
|
rk_mipi_dsi_write(regs, CMD_VIDEO_MODE, VIDEO_MODE);
|
|
|
|
/* Set video mode transmission type as burst mode */
|
|
rk_mipi_dsi_write(regs, VID_MODE_TYPE, BURST_MODE);
|
|
|
|
/* Set pix num in a video package */
|
|
rk_mipi_dsi_write(regs, VID_PKT_SIZE, 0x4b0);
|
|
|
|
/* Set dpi color coding depth 24 bit */
|
|
timing_node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(dev),
|
|
"display-timings");
|
|
node = fdt_first_subnode(gd->fdt_blob, timing_node);
|
|
val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1);
|
|
switch (val) {
|
|
case 16:
|
|
rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_16BIT_CFG_1);
|
|
break;
|
|
case 24:
|
|
rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT);
|
|
break;
|
|
case 30:
|
|
rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_30BIT);
|
|
break;
|
|
default:
|
|
rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT);
|
|
}
|
|
/* Enable low power mode */
|
|
rk_mipi_dsi_write(regs, LP_CMD_EN, 1);
|
|
rk_mipi_dsi_write(regs, LP_HFP_EN, 1);
|
|
rk_mipi_dsi_write(regs, LP_VACT_EN, 1);
|
|
rk_mipi_dsi_write(regs, LP_VFP_EN, 1);
|
|
rk_mipi_dsi_write(regs, LP_VBP_EN, 1);
|
|
rk_mipi_dsi_write(regs, LP_VSA_EN, 1);
|
|
|
|
/* Division for timeout counter clk */
|
|
rk_mipi_dsi_write(regs, TO_CLK_DIVISION, 0x0a);
|
|
|
|
/* Tx esc clk division from txbyte clk */
|
|
rk_mipi_dsi_write(regs, TX_ESC_CLK_DIVISION, txbyte_clk/txesc_clk);
|
|
|
|
/* Timeout count for hs<->lp transation between Line period */
|
|
rk_mipi_dsi_write(regs, HSTX_TO_CNT, 0x3e8);
|
|
|
|
/* Phy State transfer timing */
|
|
rk_mipi_dsi_write(regs, PHY_STOP_WAIT_TIME, 32);
|
|
rk_mipi_dsi_write(regs, PHY_TXREQUESTCLKHS, 1);
|
|
rk_mipi_dsi_write(regs, PHY_HS2LP_TIME, 0x14);
|
|
rk_mipi_dsi_write(regs, PHY_LP2HS_TIME, 0x10);
|
|
rk_mipi_dsi_write(regs, MAX_RD_TIME, 0x2710);
|
|
|
|
/* Power on */
|
|
rk_mipi_dsi_write(regs, SHUTDOWNZ, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* rk mipi dphy write function. It is used to write test data to dphy */
|
|
static void rk_mipi_phy_write(uintptr_t regs, unsigned char test_code,
|
|
unsigned char *test_data, unsigned char size)
|
|
{
|
|
int i = 0;
|
|
|
|
/* Write Test code */
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLK, 1);
|
|
rk_mipi_dsi_write(regs, PHY_TESTDIN, test_code);
|
|
rk_mipi_dsi_write(regs, PHY_TESTEN, 1);
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLK, 0);
|
|
rk_mipi_dsi_write(regs, PHY_TESTEN, 0);
|
|
|
|
/* Write Test data */
|
|
for (i = 0; i < size; i++) {
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLK, 0);
|
|
rk_mipi_dsi_write(regs, PHY_TESTDIN, test_data[i]);
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLK, 1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Mipi dphy config function. Calculate the suitable prediv, feedback div,
|
|
* fsfreqrang value ,cap ,lpf and so on according to the given pix clk rate,
|
|
* and then enable phy.
|
|
*/
|
|
int rk_mipi_phy_enable(struct udevice *dev)
|
|
{
|
|
int i;
|
|
struct rk_mipi_priv *priv = dev_get_priv(dev);
|
|
uintptr_t regs = priv->regs;
|
|
u64 fbdiv;
|
|
u64 prediv = 1;
|
|
u32 max_fbdiv = 512;
|
|
u32 max_prediv, min_prediv;
|
|
u64 ddr_clk = priv->phy_clk;
|
|
u32 refclk = priv->ref_clk;
|
|
u32 remain = refclk;
|
|
unsigned char test_data[2] = {0};
|
|
|
|
int freq_rang[][2] = {
|
|
{90, 0x01}, {100, 0x10}, {110, 0x20}, {130, 0x01},
|
|
{140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
|
|
{200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
|
|
{270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
|
|
{400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
|
|
{600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
|
|
{800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
|
|
{1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
|
|
{1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
|
|
{1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
|
|
};
|
|
|
|
/* Shutdown mode */
|
|
rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 0);
|
|
rk_mipi_dsi_write(regs, PHY_RSTZ, 0);
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLR, 1);
|
|
|
|
/* Pll locking */
|
|
rk_mipi_dsi_write(regs, PHY_TESTCLR, 0);
|
|
|
|
/* config cp and lfp */
|
|
test_data[0] = 0x80 | (ddr_clk / (200 * MHz)) << 3 | 0x3;
|
|
rk_mipi_phy_write(regs, CODE_PLL_VCORANGE_VCOCAP, test_data, 1);
|
|
|
|
test_data[0] = 0x8;
|
|
rk_mipi_phy_write(regs, CODE_PLL_CPCTRL, test_data, 1);
|
|
|
|
test_data[0] = 0x80 | 0x40;
|
|
rk_mipi_phy_write(regs, CODE_PLL_LPF_CP, test_data, 1);
|
|
|
|
/* select the suitable value for fsfreqrang reg */
|
|
for (i = 0; i < ARRAY_SIZE(freq_rang); i++) {
|
|
if (ddr_clk / (MHz) >= freq_rang[i][0])
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(freq_rang)) {
|
|
debug("%s: Dphy freq out of range!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
test_data[0] = freq_rang[i][1] << 1;
|
|
rk_mipi_phy_write(regs, CODE_HS_RX_LANE0, test_data, 1);
|
|
|
|
/*
|
|
* Calculate the best ddrclk and it's corresponding div value. If the
|
|
* given pixelclock is great than 250M, ddrclk will be fix 1500M.
|
|
* Otherwise,
|
|
* it's equal to ddr_clk= pixclk * 6. 40MHz >= refclk / prediv >= 5MHz
|
|
* according to spec.
|
|
*/
|
|
max_prediv = (refclk / (5 * MHz));
|
|
min_prediv = ((refclk / (40 * MHz)) ? (refclk / (40 * MHz) + 1) : 1);
|
|
|
|
debug("%s: DEBUG: max_prediv=%u, min_prediv=%u\n", __func__, max_prediv,
|
|
min_prediv);
|
|
|
|
if (max_prediv < min_prediv) {
|
|
debug("%s: Invalid refclk value\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculate the best refclk and feedback division value for dphy pll */
|
|
for (i = min_prediv; i < max_prediv; i++) {
|
|
if ((ddr_clk * i % refclk < remain) &&
|
|
(ddr_clk * i / refclk) < max_fbdiv) {
|
|
prediv = i;
|
|
remain = ddr_clk * i % refclk;
|
|
}
|
|
}
|
|
fbdiv = ddr_clk * prediv / refclk;
|
|
ddr_clk = refclk * fbdiv / prediv;
|
|
priv->phy_clk = ddr_clk;
|
|
|
|
debug("%s: DEBUG: refclk=%u, refclk=%llu, fbdiv=%llu, phyclk=%llu\n",
|
|
__func__, refclk, prediv, fbdiv, ddr_clk);
|
|
|
|
/* config prediv and feedback reg */
|
|
test_data[0] = prediv - 1;
|
|
rk_mipi_phy_write(regs, CODE_PLL_INPUT_DIV_RAT, test_data, 1);
|
|
test_data[0] = (fbdiv - 1) & 0x1f;
|
|
rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1);
|
|
test_data[0] = (fbdiv - 1) >> 5 | 0x80;
|
|
rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1);
|
|
test_data[0] = 0x30;
|
|
rk_mipi_phy_write(regs, CODE_PLL_INPUT_LOOP_DIV_RAT, test_data, 1);
|
|
|
|
/* rest config */
|
|
test_data[0] = 0x4d;
|
|
rk_mipi_phy_write(regs, CODE_BANDGAP_BIAS_CTRL, test_data, 1);
|
|
|
|
test_data[0] = 0x3d;
|
|
rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1);
|
|
|
|
test_data[0] = 0xdf;
|
|
rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1);
|
|
|
|
test_data[0] = 0x7;
|
|
rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1);
|
|
|
|
test_data[0] = 0x80 | 0x7;
|
|
rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1);
|
|
|
|
test_data[0] = 0x80 | 15;
|
|
rk_mipi_phy_write(regs, CODE_HSTXDATALANEREQUSETSTATETIME,
|
|
test_data, 1);
|
|
test_data[0] = 0x80 | 85;
|
|
rk_mipi_phy_write(regs, CODE_HSTXDATALANEPREPARESTATETIME,
|
|
test_data, 1);
|
|
test_data[0] = 0x40 | 10;
|
|
rk_mipi_phy_write(regs, CODE_HSTXDATALANEHSZEROSTATETIME,
|
|
test_data, 1);
|
|
|
|
/* enter into stop mode */
|
|
rk_mipi_dsi_write(regs, N_LANES, 0x03);
|
|
rk_mipi_dsi_write(regs, PHY_ENABLECLK, 1);
|
|
rk_mipi_dsi_write(regs, PHY_FORCEPLL, 1);
|
|
rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 1);
|
|
rk_mipi_dsi_write(regs, PHY_RSTZ, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|