upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.1 KiB
1.1 KiB
Watchdog driver general info
CONFIG_HW_WATCHDOG
This enables hw_watchdog_reset to be called during various loops,
including waiting for a character on a serial port. But it
does not also call hw_watchdog_init. Boards which want this
enabled must call this function in their board file. This split
is useful because some rom's enable the watchdog when downloading
new code, so it must be serviced, but the board would rather it
was off. And, it cannot always be turned off once on.
CONFIG_WATCHDOG_TIMEOUT_MSECS
Can be used to change the timeout for i.mx31/35/5x/6x.
If not given, will default to maximum timeout. This would
be 128000 msec for i.mx31/35/5x/6x.
CONFIG_AT91SAM9_WATCHDOG
Available for AT91SAM9 to service the watchdog.
CONFIG_FTWDT010_WATCHDOG
Available for FTWDT010 to service the watchdog.
CONFIG_FTWDT010_HW_TIMEOUT
Can be used to change the timeout for FTWDT010.
CONFIG_IMX_WATCHDOG
Available for i.mx31/35/5x/6x to service the watchdog. This is not
automatically set because some boards (vision2) still need to define
their own hw_watchdog_reset routine.