upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
136 lines
4.1 KiB
136 lines
4.1 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015, Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/siul.h>
|
|
#include <asm/arch/lpddr2.h>
|
|
#include <asm/arch/mmdc.h>
|
|
|
|
volatile int mscr_offset_ck0;
|
|
|
|
void lpddr2_config_iomux(uint8_t module)
|
|
{
|
|
int i;
|
|
|
|
switch (module) {
|
|
case DDR0:
|
|
mscr_offset_ck0 = SIUL2_MSCRn(_DDR0_CKE0);
|
|
writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR0_CLK0));
|
|
|
|
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE0));
|
|
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE1));
|
|
|
|
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B0));
|
|
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B1));
|
|
|
|
for (i = _DDR0_DM0; i <= _DDR0_DM3; i++)
|
|
writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR0_DQS0; i <= _DDR0_DQS3; i++)
|
|
writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR0_A0; i <= _DDR0_A9; i++)
|
|
writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR0_D0; i <= _DDR0_D31; i++)
|
|
writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
|
|
break;
|
|
case DDR1:
|
|
writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR1_CLK0));
|
|
|
|
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE0));
|
|
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE1));
|
|
|
|
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B0));
|
|
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B1));
|
|
|
|
for (i = _DDR1_DM0; i <= _DDR1_DM3; i++)
|
|
writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR1_DQS0; i <= _DDR1_DQS3; i++)
|
|
writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR1_A0; i <= _DDR1_A9; i++)
|
|
writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
|
|
|
|
for (i = _DDR1_D0; i <= _DDR1_D31; i++)
|
|
writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
|
|
break;
|
|
}
|
|
}
|
|
|
|
void config_mmdc(uint8_t module)
|
|
{
|
|
unsigned long mmdc_addr = (module) ? MMDC1_BASE_ADDR : MMDC0_BASE_ADDR;
|
|
|
|
writel(MMDC_MDSCR_CFG_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
|
|
writel(MMDC_MDCFG0_VALUE, mmdc_addr + MMDC_MDCFG0);
|
|
writel(MMDC_MDCFG1_VALUE, mmdc_addr + MMDC_MDCFG1);
|
|
writel(MMDC_MDCFG2_VALUE, mmdc_addr + MMDC_MDCFG2);
|
|
writel(MMDC_MDCFG3LP_VALUE, mmdc_addr + MMDC_MDCFG3LP);
|
|
writel(MMDC_MDOTC_VALUE, mmdc_addr + MMDC_MDOTC);
|
|
writel(MMDC_MDMISC_VALUE, mmdc_addr + MMDC_MDMISC);
|
|
writel(MMDC_MDOR_VALUE, mmdc_addr + MMDC_MDOR);
|
|
writel(_MDCTL, mmdc_addr + MMDC_MDCTL);
|
|
|
|
writel(MMDC_MPMUR0_VALUE, mmdc_addr + MMDC_MPMUR0);
|
|
|
|
while (readl(mmdc_addr + MMDC_MPMUR0) & MMDC_MPMUR0_FRC_MSR) {
|
|
}
|
|
|
|
writel(MMDC_MDSCR_RST_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
|
|
/* Perform ZQ calibration */
|
|
writel(MMDC_MPZQLP2CTL_VALUE, mmdc_addr + MMDC_MPZQLP2CTL);
|
|
writel(MMDC_MPZQHWCTRL_VALUE, mmdc_addr + MMDC_MPZQHWCTRL);
|
|
while (readl(mmdc_addr + MMDC_MPZQHWCTRL) & MMDC_MPZQHWCTRL_ZQ_HW_FOR) {
|
|
}
|
|
|
|
/* Enable MMDC with CS0 */
|
|
writel(_MDCTL + 0x80000000, mmdc_addr + MMDC_MDCTL);
|
|
|
|
/* Complete the initialization sequence as defined by JEDEC */
|
|
writel(MMDC_MDSCR_MR1_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
writel(MMDC_MDSCR_MR2_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
writel(MMDC_MDSCR_MR3_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
writel(MMDC_MDSCR_MR10_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
|
|
/* Set the amount of DRAM */
|
|
/* Set DQS settings based on board type */
|
|
|
|
switch (module) {
|
|
case MMDC0:
|
|
writel(MMDC_MDASP_MODULE0_VALUE, mmdc_addr + MMDC_MDASP);
|
|
writel(MMDC_MPRDDLCTL_MODULE0_VALUE,
|
|
mmdc_addr + MMDC_MPRDDLCTL);
|
|
writel(MMDC_MPWRDLCTL_MODULE0_VALUE,
|
|
mmdc_addr + MMDC_MPWRDLCTL);
|
|
writel(MMDC_MPDGCTRL0_MODULE0_VALUE,
|
|
mmdc_addr + MMDC_MPDGCTRL0);
|
|
writel(MMDC_MPDGCTRL1_MODULE0_VALUE,
|
|
mmdc_addr + MMDC_MPDGCTRL1);
|
|
break;
|
|
case MMDC1:
|
|
writel(MMDC_MDASP_MODULE1_VALUE, mmdc_addr + MMDC_MDASP);
|
|
writel(MMDC_MPRDDLCTL_MODULE1_VALUE,
|
|
mmdc_addr + MMDC_MPRDDLCTL);
|
|
writel(MMDC_MPWRDLCTL_MODULE1_VALUE,
|
|
mmdc_addr + MMDC_MPWRDLCTL);
|
|
writel(MMDC_MPDGCTRL0_MODULE1_VALUE,
|
|
mmdc_addr + MMDC_MPDGCTRL0);
|
|
writel(MMDC_MPDGCTRL1_MODULE1_VALUE,
|
|
mmdc_addr + MMDC_MPDGCTRL1);
|
|
break;
|
|
}
|
|
|
|
writel(MMDC_MDRWD_VALUE, mmdc_addr + MMDC_MDRWD);
|
|
writel(MMDC_MDPDC_VALUE, mmdc_addr + MMDC_MDPDC);
|
|
writel(MMDC_MDREF_VALUE, mmdc_addr + MMDC_MDREF);
|
|
writel(MMDC_MPODTCTRL_VALUE, mmdc_addr + MMDC_MPODTCTRL);
|
|
writel(MMDC_MDSCR_DEASSERT_VALUE, mmdc_addr + MMDC_MDSCR);
|
|
|
|
}
|
|
|