upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
55 lines
1.2 KiB
55 lines
1.2 KiB
if TARGET_APALIS_IMX6
|
|
|
|
config SYS_BOARD
|
|
default "apalis_imx6"
|
|
|
|
config SYS_CONFIG_NAME
|
|
default "apalis_imx6"
|
|
|
|
config SYS_CPU
|
|
default "armv7"
|
|
|
|
config SYS_SOC
|
|
default "mx6"
|
|
|
|
config SYS_VENDOR
|
|
default "toradex"
|
|
|
|
config TDX_CFG_BLOCK
|
|
default y
|
|
|
|
config TDX_HAVE_MMC
|
|
default y
|
|
|
|
config TDX_CFG_BLOCK_DEV
|
|
default "0"
|
|
|
|
config TDX_CFG_BLOCK_PART
|
|
default "1"
|
|
|
|
# Toradex config block in eMMC, at the end of 1st "boot sector"
|
|
config TDX_CFG_BLOCK_OFFSET
|
|
default "-512"
|
|
|
|
config TDX_CMD_IMX_MFGR
|
|
bool "Enable factory testing commands for Toradex iMX 6 modules"
|
|
help
|
|
This adds the commands
|
|
pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100
|
|
If executed on already fused modules it doesn't change any fuse setting.
|
|
default y
|
|
|
|
config TDX_APALIS_IMX6_V1_0
|
|
bool "Apalis iMX6 V1.0 HW"
|
|
help
|
|
Apalis iMX6 V1.0 HW has a different pinout for the UART.
|
|
The UARTs must be used in DCE mode, RTS/CTS are swapped and
|
|
thus unusable on standard carrier boards.
|
|
This option configures DCE mode unconditionally. Whithout this
|
|
option the config block stating V1.0 HW selects DCE mode,
|
|
otherwise the UARTs are configuered in DTE mode.
|
|
default n
|
|
|
|
source "board/toradex/common/Kconfig"
|
|
|
|
endif
|
|
|