upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/svm_sc8xx/svm_sc8xx.c

144 lines
4.1 KiB

/*
* (C) Copyright 2000, 2001, 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
/* ------------------------------------------------------------------------- */
const uint sdram_table[] =
{
/*-----------------
UPM A contents:
----------------- */
/*---------------------------------------------------
Read Single Beat Cycle. Offset 0 in the RAM array.
---------------------------------------------------- */
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00 ,
0x1ff77c47, 0x1ff77c35, 0xefeabc34, 0x1fb57c35 ,
/*------------------------------------------------
Read Burst Cycle. Offset 0x8 in the RAM array.
------------------------------------------------ */
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
/*-------------------------------------------------------
Write Single Beat Cycle. Offset 0x18 in the RAM array
------------------------------------------------------- */
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47 ,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff ,
/*-------------------------------------------------
Write Burst Cycle. Offset 0x20 in the RAM array
------------------------------------------------- */
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff ,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff ,
/*------------------------------------------------------------------------
Periodic Timer Expired. For DRAM refresh. Offset 0x30 in the RAM array
------------------------------------------------------------------------ */
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff ,
/*-----------
* Exception:
* ----------- */
0x7ffefc07, 0xffffffff, 0xffffffff, 0xffffffff ,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
* Test ID string (SVM8...)
*
* Return 1 for "SC8xx" type, 0 else.
*/
int checkboard(void)
{
char buf[64];
int i;
int l = getenv_f("serial#", buf, sizeof(buf));
if (l < 0 || strncmp(buf, "SVM8", 4)) {
printf("### No HW ID - assuming SVM SC8xx\n");
return (0);
}
for (i = 0; i < l; ++i) {
if (buf[i] == ' ')
break;
putc(buf[i]);
}
putc('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0 = 0;
upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#if defined (CONFIG_SDRAM_16M)
memctl->memc_mamr = 0x00802114 | CONFIG_SYS_MxMR_PTx;
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay(1);
memctl->memc_mcr = 0x80002830;
udelay(1);
memctl->memc_mar = 0x00000088;
udelay(1);
memctl->memc_mcr = 0x80002106;
udelay(1);
memctl->memc_or1 = 0xff000a00;
size_b0 = 0x01000000;
#elif defined (CONFIG_SDRAM_32M)
memctl->memc_mamr = 0x00904114 | CONFIG_SYS_MxMR_PTx;
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay(1);
memctl->memc_mcr = 0x80002830;
udelay(1);
memctl->memc_mar = 0x00000088;
udelay(1);
memctl->memc_mcr = 0x80002106;
udelay(1);
memctl->memc_or1 = 0xfe000a00;
size_b0 = 0x02000000;
#elif defined (CONFIG_SDRAM_64M)
memctl->memc_mamr = 0x00a04114 | CONFIG_SYS_MxMR_PTx;
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay(1);
memctl->memc_mcr = 0x80002830;
udelay(1);
memctl->memc_mar = 0x00000088;
udelay(1);
memctl->memc_mcr = 0x80002106;
udelay(1);
memctl->memc_or1 = 0xfc000a00;
size_b0 = 0x04000000;
#else
#error SDRAM size configuration missing.
#endif
memctl->memc_br1 = 0x00000081;
udelay(200);
return (size_b0 );
}
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif