upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
362 lines
9.9 KiB
362 lines
9.9 KiB
/*
|
|
* (C) Copyright 2000-2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/gpio.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#endif
|
|
|
|
#ifndef CFG_PLL_RECONFIG
|
|
#define CFG_PLL_RECONFIG 0
|
|
#endif
|
|
|
|
void reconfigure_pll(u32 new_cpu_freq)
|
|
{
|
|
#if defined(CONFIG_440EPX)
|
|
int reset_needed = 0;
|
|
u32 reg, temp;
|
|
u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
|
|
fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
|
|
fbdv, target_fbdv, lfbdv, target_lfbdv,
|
|
perdv0, target_perdv0, /* CLK_PERD */
|
|
spcid0, target_spcid0; /* CLK_SPCID */
|
|
|
|
/* Reconfigure clocks if necessary.
|
|
* See PPC440EPx User's Manual, sections 8.2 and 14 */
|
|
if (new_cpu_freq == 667) {
|
|
target_prbdv0 = 2;
|
|
target_fwdva = 2;
|
|
target_fwdvb = 4;
|
|
target_fbdv = 20;
|
|
target_lfbdv = 1;
|
|
target_perdv0 = 4;
|
|
target_spcid0 = 4;
|
|
|
|
mfcpr(clk_primbd, reg);
|
|
temp = (reg & PRBDV_MASK) >> 24;
|
|
prbdv0 = temp ? temp : 8;
|
|
if (prbdv0 != target_prbdv0) {
|
|
reg &= ~PRBDV_MASK;
|
|
reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
|
|
mtcpr(clk_primbd, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(clk_plld, reg);
|
|
|
|
temp = (reg & PLLD_FWDVA_MASK) >> 16;
|
|
fwdva = temp ? temp : 16;
|
|
|
|
temp = (reg & PLLD_FWDVB_MASK) >> 8;
|
|
fwdvb = temp ? temp : 8;
|
|
|
|
temp = (reg & PLLD_FBDV_MASK) >> 24;
|
|
fbdv = temp ? temp : 32;
|
|
|
|
temp = (reg & PLLD_LFBDV_MASK);
|
|
lfbdv = temp ? temp : 64;
|
|
|
|
if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
|
|
reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
|
|
PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
|
|
reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
|
|
((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
|
|
((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
|
|
(target_lfbdv == 64 ? 0 : target_lfbdv);
|
|
mtcpr(clk_plld, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(clk_perd, reg);
|
|
perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
|
|
if (perdv0 != target_perdv0) {
|
|
reg &= ~CPR0_PERD_PERDV0_MASK;
|
|
reg |= (target_perdv0 << 24);
|
|
mtcpr(clk_perd, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(clk_spcid, reg);
|
|
temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
|
|
spcid0 = temp ? temp : 4;
|
|
if (spcid0 != target_spcid0) {
|
|
reg &= ~CPR0_SPCID_SPCIDV0_MASK;
|
|
reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
|
|
mtcpr(clk_spcid, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
/* Set reload inhibit so configuration will persist across
|
|
* processor resets */
|
|
mfcpr(clk_icfg, reg);
|
|
reg &= ~CPR0_ICFG_RLI_MASK;
|
|
reg |= 1 << 31;
|
|
mtcpr(clk_icfg, reg);
|
|
}
|
|
|
|
/* Reset processor if configuration changed */
|
|
if (reset_needed) {
|
|
__asm__ __volatile__ ("sync; isync");
|
|
mtspr(dbcr0, 0x20000000);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Reconfigure PLL if necessary,
|
|
* set up the memory map,
|
|
* initialize a bunch of registers
|
|
*/
|
|
void
|
|
cpu_init_f (void)
|
|
{
|
|
#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
|
|
u32 val;
|
|
#endif
|
|
|
|
reconfigure_pll(CFG_PLL_RECONFIG);
|
|
|
|
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
|
|
/*
|
|
* GPIO0 setup (select GPIO or alternate function)
|
|
*/
|
|
#if defined(CFG_GPIO0_OR)
|
|
out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */
|
|
#endif
|
|
#if defined(CFG_GPIO0_ODR)
|
|
out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */
|
|
#endif
|
|
out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
|
|
out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
|
|
out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
|
|
out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
|
|
out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
|
|
out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
|
|
#if defined(CFG_GPIO0_ISR2H)
|
|
out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
|
|
out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
|
|
#endif
|
|
#if defined (CFG_GPIO0_TCR)
|
|
out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
|
|
#endif
|
|
#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */
|
|
|
|
#if defined (CONFIG_405EP)
|
|
/*
|
|
* Set EMAC noise filter bits
|
|
*/
|
|
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
|
|
|
|
/*
|
|
* Enable the internal PCI arbiter
|
|
*/
|
|
mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
|
|
#endif /* CONFIG_405EP */
|
|
|
|
#if defined(CFG_4xx_GPIO_TABLE)
|
|
gpio_set_chip_configuration();
|
|
#endif /* CFG_4xx_GPIO_TABLE */
|
|
|
|
/*
|
|
* External Bus Controller (EBC) Setup
|
|
*/
|
|
#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
|
|
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_405EX) || defined(CONFIG_405))
|
|
/*
|
|
* Move the next instructions into icache, since these modify the flash
|
|
* we are running from!
|
|
*/
|
|
asm volatile(" bl 0f" ::: "lr");
|
|
asm volatile("0: mflr 3" ::: "r3");
|
|
asm volatile(" addi 4, 0, 14" ::: "r4");
|
|
asm volatile(" mtctr 4" ::: "ctr");
|
|
asm volatile("1: icbt 0, 3");
|
|
asm volatile(" addi 3, 3, 32" ::: "r3");
|
|
asm volatile(" bdnz 1b" ::: "ctr", "cr0");
|
|
asm volatile(" addis 3, 0, 0x0" ::: "r3");
|
|
asm volatile(" ori 3, 3, 0xA000" ::: "r3");
|
|
asm volatile(" mtctr 3" ::: "ctr");
|
|
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
|
|
#endif
|
|
|
|
mtebc(pb0ap, CFG_EBC_PB0AP);
|
|
mtebc(pb0cr, CFG_EBC_PB0CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1))
|
|
mtebc(pb1ap, CFG_EBC_PB1AP);
|
|
mtebc(pb1cr, CFG_EBC_PB1CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2))
|
|
mtebc(pb2ap, CFG_EBC_PB2AP);
|
|
mtebc(pb2cr, CFG_EBC_PB2CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3))
|
|
mtebc(pb3ap, CFG_EBC_PB3AP);
|
|
mtebc(pb3cr, CFG_EBC_PB3CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
|
|
mtebc(pb4ap, CFG_EBC_PB4AP);
|
|
mtebc(pb4cr, CFG_EBC_PB4CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5))
|
|
mtebc(pb5ap, CFG_EBC_PB5AP);
|
|
mtebc(pb5cr, CFG_EBC_PB5CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6))
|
|
mtebc(pb6ap, CFG_EBC_PB6AP);
|
|
mtebc(pb6cr, CFG_EBC_PB6CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7))
|
|
mtebc(pb7ap, CFG_EBC_PB7AP);
|
|
mtebc(pb7cr, CFG_EBC_PB7CR);
|
|
#endif
|
|
|
|
#if defined (CFG_EBC_CFG)
|
|
mtebc(EBC0_CFG, CFG_EBC_CFG);
|
|
#endif
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
val = mfspr(tcr);
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
|
|
#elif defined(CONFIG_440EPX)
|
|
val |= 0xb0000000; /* generate system reset after 1.34 seconds */
|
|
#else
|
|
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
|
|
#endif
|
|
#if defined(CFG_4xx_RESET_TYPE)
|
|
val &= ~0x30000000; /* clear WRC bits */
|
|
val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */
|
|
#endif
|
|
mtspr(tcr, val);
|
|
|
|
val = mfspr(tsr);
|
|
val |= 0x80000000; /* enable watchdog timer */
|
|
mtspr(tsr, val);
|
|
|
|
reset_4xx_watchdog();
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
#if defined(CONFIG_440GX)
|
|
/* Take the GX out of compatibility mode
|
|
* Travis Sawyer, 9 Mar 2004
|
|
* NOTE: 440gx user manual inconsistency here
|
|
* Compatibility mode and Ethernet Clock select are not
|
|
* correct in the manual
|
|
*/
|
|
mfsdr(sdr_mfr, val);
|
|
val &= ~0x10000000;
|
|
mtsdr(sdr_mfr,val);
|
|
#endif /* CONFIG_440GX */
|
|
|
|
#if defined(CONFIG_460EX)
|
|
/*
|
|
* Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
|
|
* clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
|
|
* regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
|
|
*/
|
|
mfsdr(SDR0_AHB_CFG, val);
|
|
val |= 0x80;
|
|
val &= ~0x40;
|
|
mtsdr(SDR0_AHB_CFG, val);
|
|
mfsdr(SDR0_USB2HOST_CFG, val);
|
|
val &= ~0xf00;
|
|
val |= 0x400;
|
|
mtsdr(SDR0_USB2HOST_CFG, val);
|
|
#endif /* CONFIG_460EX */
|
|
|
|
#if defined(CONFIG_405EX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
|
|
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
|
|
defined(CONFIG_460SX)
|
|
/*
|
|
* Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
|
|
*/
|
|
mtdcr(plb0_acr, (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) |
|
|
plb0_acr_rdp_4deep);
|
|
mtdcr(plb1_acr, (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) |
|
|
plb1_acr_rdp_4deep);
|
|
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like time base and timers
|
|
*/
|
|
int cpu_init_r (void)
|
|
{
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
bd_t *bd = gd->bd;
|
|
unsigned long reg;
|
|
#if defined(CONFIG_405GP)
|
|
uint pvr = get_pvr();
|
|
#endif
|
|
|
|
/*
|
|
* Write Ethernetaddress into on-chip register
|
|
*/
|
|
reg = 0x00000000;
|
|
reg |= bd->bi_enetaddr[0]; /* set high address */
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[1];
|
|
out32 (EMAC_IAH, reg);
|
|
|
|
reg = 0x00000000;
|
|
reg |= bd->bi_enetaddr[2]; /* set low address */
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[3];
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[4];
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[5];
|
|
out32 (EMAC_IAL, reg);
|
|
|
|
#if defined(CONFIG_405GP)
|
|
/*
|
|
* Set edge conditioning circuitry on PPC405GPr
|
|
* for compatibility to existing PPC405GP designs.
|
|
*/
|
|
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
|
|
mtdcr(ecr, 0x60606000);
|
|
}
|
|
#endif /* defined(CONFIG_405GP) */
|
|
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
|
|
|
|
return (0);
|
|
}
|
|
|