upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
293 lines
8.3 KiB
293 lines
8.3 KiB
/*
|
|
* Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include "asm/arch/orion5x.h"
|
|
|
|
/*
|
|
* Configuration values for SDRAM access setup
|
|
*/
|
|
|
|
#define SDRAM_CONFIG 0x3148400
|
|
#define SDRAM_MODE 0x62
|
|
#define SDRAM_CONTROL 0x4041000
|
|
#define SDRAM_TIME_CTRL_LOW 0x11602220
|
|
#define SDRAM_TIME_CTRL_HI 0x40c
|
|
#define SDRAM_OPEN_PAGE_EN 0x0
|
|
/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */
|
|
#define SDRAM_BANK0_SIZE 0x3ff0001
|
|
#define SDRAM_ADDR_CTRL 0x10
|
|
|
|
#define SDRAM_OP_NOP 0x05
|
|
#define SDRAM_OP_SETMODE 0x03
|
|
|
|
#define SDRAM_PAD_CTRL_WR_EN 0x80000000
|
|
#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000
|
|
#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f
|
|
#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0
|
|
|
|
/*
|
|
* For Guideline MEM-3 - Drive Strength value
|
|
*/
|
|
|
|
#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000
|
|
#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000
|
|
|
|
/*
|
|
* For Guideline MEM-4 - DQS Reference Delay Tuning
|
|
*/
|
|
|
|
#define MSAR_ARMDDRCLCK_MASK 0x000000f0
|
|
#define MSAR_ARMDDRCLCK_H_MASK 0x00000100
|
|
|
|
#define MSAR_ARMDDRCLCK_333_167 0x00000000
|
|
#define MSAR_ARMDDRCLCK_500_167 0x00000030
|
|
#define MSAR_ARMDDRCLCK_667_167 0x00000060
|
|
#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0
|
|
#define MSAR_ARMDDRCLCK_400_200 0x00000010
|
|
#define MSAR_ARMDDRCLCK_600_200 0x00000050
|
|
#define MSAR_ARMDDRCLCK_800_200 0x00000070
|
|
|
|
#define FTDLL_DDR1_166MHZ 0x0047F001
|
|
|
|
#define FTDLL_DDR1_200MHZ 0x0044D001
|
|
|
|
/*
|
|
* Low-level init happens right after start.S has switched to SVC32,
|
|
* flushed and disabled caches and disabled MMU. We're still running
|
|
* from the boot chip select, so the first thing we should do is set
|
|
* up RAM for us to relocate into.
|
|
*/
|
|
|
|
.globl lowlevel_init
|
|
|
|
lowlevel_init:
|
|
|
|
/* Use 'r4 as the base for internal register accesses */
|
|
ldr r4, =ORION5X_REGS_PHY_BASE
|
|
|
|
/* move internal registers from the default 0xD0000000
|
|
* to their intended location, defined by SoC */
|
|
ldr r3, =0xD0000000
|
|
add r3, r3, #0x20000
|
|
str r4, [r3, #0x80]
|
|
|
|
/* Use R3 as the base for DRAM registers */
|
|
add r3, r4, #0x01000
|
|
|
|
/*DDR SDRAM Initialization Control */
|
|
ldr r6, =0x00000001
|
|
str r6, [r3, #0x480]
|
|
|
|
/* Use R3 as the base for PCI registers */
|
|
add r3, r4, #0x31000
|
|
|
|
/* Disable arbiter */
|
|
ldr r6, =0x00000030
|
|
str r6, [r3, #0xd00]
|
|
|
|
/* Use R3 as the base for DRAM registers */
|
|
add r3, r4, #0x01000
|
|
|
|
/* set all dram windows to 0 */
|
|
mov r6, #0
|
|
str r6, [r3, #0x504]
|
|
str r6, [r3, #0x50C]
|
|
str r6, [r3, #0x514]
|
|
str r6, [r3, #0x51C]
|
|
|
|
/* 1) Configure SDRAM */
|
|
ldr r6, =SDRAM_CONFIG
|
|
str r6, [r3, #0x400]
|
|
|
|
/* 2) Set SDRAM Control reg */
|
|
ldr r6, =SDRAM_CONTROL
|
|
str r6, [r3, #0x404]
|
|
|
|
/* 3) Write SDRAM address control register */
|
|
ldr r6, =SDRAM_ADDR_CTRL
|
|
str r6, [r3, #0x410]
|
|
|
|
/* 4) Write SDRAM bank 0 size register */
|
|
ldr r6, =SDRAM_BANK0_SIZE
|
|
str r6, [r3, #0x504]
|
|
/* keep other banks disabled */
|
|
|
|
/* 5) Write SDRAM open pages control register */
|
|
ldr r6, =SDRAM_OPEN_PAGE_EN
|
|
str r6, [r3, #0x414]
|
|
|
|
/* 6) Write SDRAM timing Low register */
|
|
ldr r6, =SDRAM_TIME_CTRL_LOW
|
|
str r6, [r3, #0x408]
|
|
|
|
/* 7) Write SDRAM timing High register */
|
|
ldr r6, =SDRAM_TIME_CTRL_HI
|
|
str r6, [r3, #0x40C]
|
|
|
|
/* 8) Write SDRAM mode register */
|
|
/* The CPU must not attempt to change the SDRAM Mode register setting */
|
|
/* prior to DRAM controller completion of the DRAM initialization */
|
|
/* sequence. To guarantee this restriction, it is recommended that */
|
|
/* the CPU sets the SDRAM Operation register to NOP command, performs */
|
|
/* read polling until the register is back in Normal operation value, */
|
|
/* and then sets SDRAM Mode register to its new value. */
|
|
|
|
/* 8.1 write 'nop' to SDRAM operation */
|
|
ldr r6, =SDRAM_OP_NOP
|
|
str r6, [r3, #0x418]
|
|
|
|
/* 8.2 poll SDRAM operation until back in 'normal' mode. */
|
|
1:
|
|
ldr r6, [r3, #0x418]
|
|
cmp r6, #0
|
|
bne 1b
|
|
|
|
/* 8.3 Now its safe to write new value to SDRAM Mode register */
|
|
ldr r6, =SDRAM_MODE
|
|
str r6, [r3, #0x41C]
|
|
|
|
/* 8.4 Set new mode */
|
|
ldr r6, =SDRAM_OP_SETMODE
|
|
str r6, [r3, #0x418]
|
|
|
|
/* 8.5 poll SDRAM operation until back in 'normal' mode. */
|
|
2:
|
|
ldr r6, [r3, #0x418]
|
|
cmp r6, #0
|
|
bne 2b
|
|
|
|
/* DDR SDRAM Address/Control Pads Calibration */
|
|
ldr r6, [r3, #0x4C0]
|
|
|
|
/* Set Bit [31] to make the register writable */
|
|
orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
str r6, [r3, #0x4C0]
|
|
|
|
bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
|
|
|
|
/* Get the final N locked value of driving strength [22:17] */
|
|
mov r1, r6
|
|
mov r1, r1, LSL #9
|
|
mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */
|
|
orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */
|
|
|
|
/* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
|
|
orr r6, r6, r1
|
|
str r6, [r3, #0x4C0]
|
|
|
|
/* DDR SDRAM Data Pads Calibration */
|
|
ldr r6, [r3, #0x4C4]
|
|
|
|
/* Set Bit [31] to make the register writable */
|
|
orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
str r6, [r3, #0x4C4]
|
|
|
|
bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
|
|
|
|
/* Get the final N locked value of driving strength [22:17] */
|
|
mov r1, r6
|
|
mov r1, r1, LSL #9
|
|
mov r1, r1, LSR #26
|
|
orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */
|
|
|
|
/* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
|
|
orr r6, r6, r1
|
|
|
|
str r6, [r3, #0x4C4]
|
|
|
|
/* Implement Guideline (GL# MEM-3) Drive Strength Value */
|
|
/* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
|
|
|
|
ldr r1, =DDR1_PAD_STRENGTH_DEFAULT
|
|
|
|
/* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */
|
|
ldr r6, [r3, #0x4C0]
|
|
orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
str r6, [r3, #0x4C0]
|
|
|
|
/* Correct strength and disable writes again */
|
|
bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
|
|
orr r6, r6, r1
|
|
str r6, [r3, #0x4C0]
|
|
|
|
/* Enable writes to DDR SDRAM Data Pads Calibration register */
|
|
ldr r6, [r3, #0x4C4]
|
|
orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
str r6, [r3, #0x4C4]
|
|
|
|
/* Correct strength and disable writes again */
|
|
bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
|
|
bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
|
|
orr r6, r6, r1
|
|
str r6, [r3, #0x4C4]
|
|
|
|
/* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */
|
|
/* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
|
|
|
|
/* Get the "sample on reset" register for the DDR frequancy */
|
|
ldr r3, =0x10000
|
|
ldr r6, [r3, #0x010]
|
|
ldr r1, =MSAR_ARMDDRCLCK_MASK
|
|
and r1, r6, r1
|
|
|
|
ldr r6, =FTDLL_DDR1_166MHZ
|
|
cmp r1, #MSAR_ARMDDRCLCK_333_167
|
|
beq 3f
|
|
cmp r1, #MSAR_ARMDDRCLCK_500_167
|
|
beq 3f
|
|
cmp r1, #MSAR_ARMDDRCLCK_667_167
|
|
beq 3f
|
|
|
|
ldr r6, =FTDLL_DDR1_200MHZ
|
|
cmp r1, #MSAR_ARMDDRCLCK_400_200_1
|
|
beq 3f
|
|
cmp r1, #MSAR_ARMDDRCLCK_400_200
|
|
beq 3f
|
|
cmp r1, #MSAR_ARMDDRCLCK_600_200
|
|
beq 3f
|
|
cmp r1, #MSAR_ARMDDRCLCK_800_200
|
|
beq 3f
|
|
|
|
ldr r6, =0
|
|
|
|
3:
|
|
/* Use R3 as the base for DRAM registers */
|
|
add r3, r4, #0x01000
|
|
|
|
ldr r2, [r3, #0x484]
|
|
orr r2, r2, r6
|
|
str r2, [r3, #0x484]
|
|
|
|
/* Return to U-boot via saved link register */
|
|
mov pc, lr
|
|
|