upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
208 lines
7.2 KiB
208 lines
7.2 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_X86 1 /* This is a X86 CPU */
|
|
#define CONFIG_SC520 1 /* Include support for AMD SC520 */
|
|
#define CONFIG_ALI152X 1 /* Include support for Ali 152x SIO */
|
|
|
|
#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
|
|
#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
|
|
#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */
|
|
|
|
/* define at most one of these */
|
|
#undef CFG_SDRAM_CAS_LATENCY_2T
|
|
#define CFG_SDRAM_CAS_LATENCY_3T
|
|
|
|
#define CFG_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
|
|
#define CFG_RESET_GENERIC 1 /* use tripple-fault to reset cpu */
|
|
#undef CFG_RESET_SC520 /* use SC520 MMCR's to reset cpu */
|
|
#undef CFG_TIMER_SC520 /* use SC520 swtimers */
|
|
#define CFG_TIMER_GENERIC 1 /* use the i8254 PIT timers */
|
|
#undef CFG_TIMER_TSC /* use the Pentium TSC timers */
|
|
#define CFG_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
|
|
* in the SC520 on the CDP */
|
|
|
|
#define CFG_STACK_SIZE 0x8000 /* Size of bootloader stack */
|
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS 1
|
|
#define CONFIG_LAST_STAGE_INIT 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
|
|
|
|
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 15
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
|
|
/* #define CONFIG_BOOTCOMMAND "bootm 38000000" */
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "boot > " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1024 /* incrementer freq: 1kHz */
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
|
|
#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */
|
|
#define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */
|
|
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
/* Environment in EEPROM */
|
|
#define CFG_ENV_IS_IN_EEPROM 1
|
|
#define CONFIG_SPI
|
|
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
|
|
#define CFG_ENV_OFFSET 0
|
|
#define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */
|
|
#undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */
|
|
#define CONFIG_SPI_X 1
|
|
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
|
|
#define CFG_JFFS2_NUM_BANKS 1 /* */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Device drivers
|
|
*/
|
|
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
|
#define CONFIG_PCNET
|
|
#define CONFIG_PCNET_79C973
|
|
#define CONFIG_PCNET_79C975
|
|
#define PCNET_HAS_PROM 1
|
|
|
|
/************************************************************
|
|
* IDE/ATA stuff
|
|
************************************************************/
|
|
#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
|
|
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
|
|
|
|
#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
|
|
/*#define CFG_ATA_IDE1_OFFSET 0x0170 /###* ide1 offset */
|
|
#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
|
|
#define CFG_ATA_REG_OFFSET 0 /* reg offset */
|
|
#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
|
|
#define CFG_ATA_BASE_ADDR 0
|
|
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#undef CONFIG_IDE_RESET /* reset for ide unsupported... */
|
|
#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
|
|
|
|
/************************************************************
|
|
* ATAPI support (experimental)
|
|
************************************************************/
|
|
#define CONFIG_ATAPI /* enable ATAPI Support */
|
|
|
|
/************************************************************
|
|
* DISK Partition support
|
|
************************************************************/
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_ISO_PARTITION /* Experimental */
|
|
|
|
/************************************************************
|
|
* Video/Keyboard support
|
|
************************************************************/
|
|
#define CONFIG_VIDEO /* To enable video controller support */
|
|
#define CONFIG_I8042_KBD
|
|
#define CFG_ISA_IO 0
|
|
|
|
|
|
/************************************************************
|
|
* RTC
|
|
***********************************************************/
|
|
#define CONFIG_RTC_MC146818
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* PCI stuff
|
|
*/
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_PNP /* pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
|
|
#define CFG_FIRST_PCI_IRQ 10
|
|
#define CFG_SECOND_PCI_IRQ 9
|
|
#define CFG_THIRD_PCI_IRQ 11
|
|
#define CFG_FORTH_PCI_IRQ 15
|
|
|
|
#endif /* __CONFIG_H */
|
|
|