upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
414 lines
14 KiB
414 lines
14 KiB
/*
|
|
* (C) Copyright 2002-2003
|
|
* Gary Jennejohn <gj@denx.de>
|
|
*
|
|
* Configuation settings for the TRAB board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* Default configuration is with 8 MB Flash, 32 MB RAM
|
|
*/
|
|
#if (!defined(CONFIG_FLASH_8MB)) && (!defined(CONFIG_FLASH_16MB))
|
|
# define CONFIG_FLASH_8MB /* 8 MB Flash */
|
|
#endif
|
|
#if (!defined(CONFIG_RAM_16MB)) && (!defined(CONFIG_RAM_32MB))
|
|
# define CONFIG_RAM_32MB /* 32 MB SDRAM */
|
|
#endif
|
|
|
|
/*
|
|
* If we are developing, we might want to start armboot from ram
|
|
* so we MUST NOT initialize critical regs like mem-timing ...
|
|
*/
|
|
#define CONFIG_INIT_CRITICAL /* undef for developing */
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
|
|
#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
|
|
#define CONFIG_TRAB 1 /* on a TRAB Board */
|
|
#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
|
|
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
|
|
|
|
/* automatic software updates (see board/trab/auto_update.c) */
|
|
#define CONFIG_AUTO_UPDATE 1
|
|
|
|
/* input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CFG_DEVICE_NULLDEV 1 /* enble null device */
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
/***********************************************************
|
|
* I2C stuff:
|
|
* the TRAB is equipped with an ATMEL 24C04 EEPROM at
|
|
* address 0x54 with 8bit addressing
|
|
***********************************************************/
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CFG_I2C_SPEED 100000 /* I2C speed */
|
|
#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
|
|
|
|
#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM address */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */
|
|
|
|
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 bytes page write mode on 24C04 */
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* USB stuff */
|
|
#define CONFIG_USB_OHCI 1
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
|
|
#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
|
|
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
|
|
|
|
#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
|
|
|
|
#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
|
|
#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
|
|
|
|
#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
|
|
|
|
#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
|
|
|
|
#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */
|
|
|
|
/*
|
|
* The following enables modem debugging stuff. The dbg() and
|
|
* 'char screen[1024]' are used for debug printfs. Unfortunately,
|
|
* it is usable only from BDI
|
|
*/
|
|
#undef CONFIG_MODEM_SUPPORT_DEBUG
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
|
|
|
|
/* Use s3c2400's RTC */
|
|
#define CONFIG_RTC_S3C24X0 1
|
|
|
|
#ifdef CONFIG_HWFLOW
|
|
#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_HWFLOW 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_VFD
|
|
#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_VFD 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_S3C24X0_I2C
|
|
#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM
|
|
#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_EEPROM 0
|
|
#define CONFIG_COMMANDS_I2C 0
|
|
#endif
|
|
|
|
#ifndef USE_920T_MMU
|
|
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
|
|
CFG_CMD_BSP | \
|
|
CFG_CMD_DATE | \
|
|
CONFIG_COMMANDS_ADD_HWFLOW | \
|
|
CONFIG_COMMANDS_ADD_VFD | \
|
|
CONFIG_COMMANDS_ADD_EEPROM | \
|
|
CFG_CMD_USB | \
|
|
CFG_CMD_FAT | \
|
|
CONFIG_COMMANDS_I2C )
|
|
#else
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CFG_CMD_BSP | \
|
|
CFG_CMD_DATE | \
|
|
CONFIG_COMMANDS_ADD_HWFLOW | \
|
|
CONFIG_COMMANDS_ADD_VFD | \
|
|
CONFIG_COMMANDS_ADD_EEPROM | \
|
|
CFG_CMD_USB | \
|
|
CFG_CMD_FAT | \
|
|
CONFIG_COMMANDS_I2C )
|
|
#endif
|
|
|
|
/* moved up */
|
|
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
|
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
|
|
#define CONFIG_BOOTARGS "console=ttyS0"
|
|
#define CONFIG_NETMASK 255.255.0.0
|
|
#define CONFIG_IPADDR 192.168.3.68
|
|
#define CONFIG_HOSTNAME trab
|
|
#define CONFIG_SERVERIP 192.168.3.1
|
|
#define CONFIG_BOOTCOMMAND "burn_in"
|
|
|
|
#ifndef CONFIG_FLASH_8MB /* current config: 16 MB flash */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 $filesize\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=00060000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CFG_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
|
|
"add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 $(u-boot)\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 $(filesize)\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot $(loadaddr) $(loadfile)\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CFG_HUSH_PARSER */
|
|
#else /* CONFIG_FLASH_8MB => 8 MB flash */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 $filesize;" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CFG_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
|
|
"add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 $(u-boot)\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 $(filesize);" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot $(loadaddr) $(loadfile)\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CFG_HUSH_PARSER */
|
|
#endif /* CONFIG_FLASH_8MB */
|
|
|
|
#if 0 /* disabled for development */
|
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
|
#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "system" /* 1st password */
|
|
#endif
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
/* what's this ? it's not used anywhere */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x0C000000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0D000000 /* 16 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0x0CF00000 /* default load address */
|
|
|
|
#ifdef CONFIG_TRAB_50MHZ
|
|
/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
|
|
/* it to wrap 100 times (total 1562500) to get 1 sec. */
|
|
/* this should _really_ be calculated !! */
|
|
#define CFG_HZ 1562500
|
|
#else
|
|
/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
|
|
/* it to wrap 100 times (total 1039000) to get 1 sec. */
|
|
/* this should _really_ be calculated !! */
|
|
#define CFG_HZ 1039000
|
|
#endif
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* burn-in test stuff.
|
|
*
|
|
* BURN_IN_CYCLE_DELAY defines the seconds to wait between each burn-in cycle
|
|
* Because the burn-in test itself causes also an delay of about 4 seconds,
|
|
* this time must be subtracted from the desired overall burn-in cycle time.
|
|
*/
|
|
#define BURN_IN_CYCLE_DELAY 296 /* seconds between burn-in cycles */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x0C000000 /* SDRAM Bank #1 */
|
|
#ifndef CONFIG_RAM_16MB
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
#else
|
|
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
|
|
#endif
|
|
|
|
#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
|
|
|
|
/* The following #defines are needed to get flash environment right */
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
|
#define CFG_MONITOR_LEN (256 << 10)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
#else
|
|
#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
|
|
#endif
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
|
|
#define CFG_ENV_SIZE 0x4000
|
|
#define CFG_ENV_SECT_SIZE 0x20000
|
|
#else
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x8000)
|
|
#define CFG_ENV_SIZE 0x4000
|
|
#define CFG_ENV_SECT_SIZE 0x4000
|
|
#endif
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
|
|
/* Initial value of the on-board touch screen brightness */
|
|
#define CFG_BRIGHTNESS 0x20
|
|
|
|
#endif /* __CONFIG_H */
|
|
|