upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/keymile/km_arm/km_arm.c

321 lines
7.0 KiB

/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2010
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <i2c.h>
#include <nand.h>
#include <netdev.h>
#include <miiphy.h>
#include <asm/io.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
static int io_dev;
extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_PEX_RST_OUTn,
#if defined(CONFIG_SOFT_I2C)
MPP8_GPIO, /* SDA */
MPP9_GPIO, /* SCL */
#endif
#if defined(CONFIG_HARD_I2C)
MPP8_TW_SDA,
MPP9_TW_SCK,
#endif
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Reserved */
MPP13_UART1_TXD,
MPP14_UART1_RXD,
MPP15_GPIO, /* Not used */
MPP16_GPIO, /* Not used */
MPP17_GPIO, /* Reserved */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_GPIO,
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
MPP24_GPIO,
MPP25_GPIO,
MPP26_GPIO,
MPP27_GPIO,
MPP28_GPIO,
MPP29_GPIO,
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
MPP33_GPIO,
MPP34_GPIO, /* CDL1 (input) */
MPP35_GPIO, /* CDL2 (input) */
MPP36_GPIO, /* MAIN_IRQ (input) */
MPP37_GPIO, /* BOARD_LED */
MPP38_GPIO, /* Piggy3 LED[1] */
MPP39_GPIO, /* Piggy3 LED[2] */
MPP40_GPIO, /* Piggy3 LED[3] */
MPP41_GPIO, /* Piggy3 LED[4] */
MPP42_GPIO, /* Piggy3 LED[5] */
MPP43_GPIO, /* Piggy3 LED[6] */
MPP44_GPIO, /* Piggy3 LED[7] */
MPP45_GPIO, /* Piggy3 LED[8] */
MPP46_GPIO, /* Reserved */
MPP47_GPIO, /* Reserved */
MPP48_GPIO, /* Reserved */
MPP49_GPIO, /* SW_INTOUTn */
0
};
int ethernet_present(void)
{
uchar buf;
int ret = 0;
if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
printf ("%s: Error reading Boco\n", __FUNCTION__);
return -1;
}
if ((buf & 0x40) == 0x40) {
ret = 1;
}
return ret;
}
int misc_init_r(void)
{
I2C_MUX_DEVICE *i2cdev;
char *str;
int mach_type;
/* add I2C Bus for I/O Expander */
i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a");
io_dev = i2cdev->busid;
puts("Piggy:");
if (ethernet_present() == 0)
puts (" not");
puts(" present\n");
str = getenv("mach_type");
if (str != NULL) {
mach_type = simple_strtoul(str, NULL, 10);
printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
gd->bd->bi_arch_number = mach_type;
}
return 0;
}
int board_init(void)
{
u32 tmp;
kirkwood_mpp_conf(kwmpp_config);
/*
* The FLASH_GPIO_PIN switches between using a
* NAND or a SPI FLASH. Set this pin on start
* to NAND mode.
*/
tmp = readl(KW_GPIO0_BASE);
writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
tmp = readl(KW_GPIO0_BASE + 4);
writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4);
printf("KM: setting NAND mode\n");
/*
* arch number of board
*/
gd->bd->bi_arch_number = MACH_TYPE_SUEN3;
/* address of boot parameters */
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
#if defined(CONFIG_SOFT_I2C)
/* init the GPIO for I2C Bitbang driver */
kw_gpio_set_valid(SUEN3_SDA_PIN, 1);
kw_gpio_set_valid(SUEN3_SCL_PIN, 1);
kw_gpio_direction_output(SUEN3_SDA_PIN, 0);
kw_gpio_direction_output(SUEN3_SCL_PIN, 0);
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
kw_gpio_set_valid(SUEN3_ENV_WP, 38);
kw_gpio_direction_output(SUEN3_ENV_WP, 1);
#endif
return 0;
}
#if defined(CONFIG_CMD_SF)
int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u32 tmp;
if (argc < 2)
return cmd_usage(cmdtp);
if ((strcmp(argv[1], "off") == 0)) {
printf("SPI FLASH disabled, NAND enabled\n");
/* Multi-Purpose Pins Functionality configuration */
kwmpp_config[0] = MPP0_NF_IO2;
kwmpp_config[1] = MPP1_NF_IO3;
kwmpp_config[2] = MPP2_NF_IO4;
kwmpp_config[3] = MPP3_NF_IO5;
kirkwood_mpp_conf(kwmpp_config);
tmp = readl(KW_GPIO0_BASE);
writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
} else if ((strcmp(argv[1], "on") == 0)) {
printf("SPI FLASH enabled, NAND disabled\n");
/* Multi-Purpose Pins Functionality configuration */
kwmpp_config[0] = MPP0_SPI_SCn;
kwmpp_config[1] = MPP1_SPI_MOSI;
kwmpp_config[2] = MPP2_SPI_SCK;
kwmpp_config[3] = MPP3_SPI_MISO;
kirkwood_mpp_conf(kwmpp_config);
tmp = readl(KW_GPIO0_BASE);
writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE);
} else {
return cmd_usage(cmdtp);
}
return 0;
}
U_BOOT_CMD(
spitoggle, 2, 0, do_spi_toggle,
"En-/disable SPI FLASH access",
"<on|off> - Enable (on) or disable (off) SPI FLASH access\n"
);
#endif
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
kw_sdram_bs(i));
}
return 0;
}
/* Configure and enable MV88E1118 PHY */
void reset_phy(void)
{
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
}
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var (void)
{
ivm_read_eeprom ();
return 0;
}
#endif
#if defined(CONFIG_BOOTCOUNT_LIMIT)
void bootcount_store (ulong a)
{
volatile ulong *save_addr;
volatile ulong size = 0;
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
size += gd->bd->bi_dram[i].size;
}
save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
writel(a, save_addr);
writel(BOOTCOUNT_MAGIC, &save_addr[1]);
}
ulong bootcount_load (void)
{
volatile ulong *save_addr;
volatile ulong size = 0;
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
size += gd->bd->bi_dram[i].size;
}
save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
if (readl(&save_addr[1]) != BOOTCOUNT_MAGIC)
return 0;
else
return readl(save_addr);
}
#endif
#if defined(CONFIG_SOFT_I2C)
void set_sda (int state)
{
I2C_ACTIVE;
I2C_SDA(state);
}
void set_scl (int state)
{
I2C_SCL(state);
}
int get_sda (void)
{
I2C_TRISTATE;
return I2C_READ;
}
int get_scl (void)
{
return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
}
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
int eeprom_write_enable (unsigned dev_addr, int state)
{
kw_gpio_set_value(SUEN3_ENV_WP, !state);
return !kw_gpio_get_value(SUEN3_ENV_WP);
}
#endif