upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
214 lines
8.4 KiB
214 lines
8.4 KiB
/*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
#include <asm/sizes.h>
|
|
|
|
/*
|
|
* Define this to make U-Boot skip low level initialization when loaded
|
|
* by initial bootloader. Not required by NAND U-Boot version but IS
|
|
* required for a NOR version used to burn the real NOR U-Boot into
|
|
* NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
|
|
* so it is NOT possible to build a U-Boot with both NAND and NOR routines.
|
|
* NOR U-Boot is loaded directly from Flash so it must perform all the
|
|
* low level initialization itself. NAND version is loaded by an initial
|
|
* bootloader (UBL in TI-ese) that performs such an initialization so it's
|
|
* skipped in NAND version. The third DaVinci boot mode loads a bootloader
|
|
* via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
|
|
* performing low level init prior to loading. All that means we can NOT use
|
|
* NAND version to put U-Boot into NOR because it doesn't have NOR support and
|
|
* we can NOT use NOR version because it performs low level initialization
|
|
* effectively destroying itself in DDR memory. That's why a separate NOR
|
|
* version with this define is needed. It is loaded via UART, then one uses
|
|
* it to somehow download a proper NOR version built WITHOUT this define to
|
|
* RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
|
|
* NOR support into the initial bootloader so it won't be needed but DaVinci
|
|
* static RAM might be too small for this (I have something like 2Kbytes left
|
|
* as of now, without NOR support) so this might've not happened...
|
|
*
|
|
#define CONFIG_NOR_UART_BOOT
|
|
*/
|
|
|
|
/*=======*/
|
|
/* Board */
|
|
/*=======*/
|
|
#define DV_EVM
|
|
#define CFG_NAND_SMALLPAGE
|
|
#define CFG_USE_NOR
|
|
/*===================*/
|
|
/* SoC Configuration */
|
|
/*===================*/
|
|
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
|
|
#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
|
|
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
|
|
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
|
|
#define CFG_HZ 1000
|
|
/*====================================================*/
|
|
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
|
|
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
|
|
/*====================================================*/
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 2
|
|
#define CFG_I2C_EEPROM_ADDR 0x50
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 6
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
/*=============*/
|
|
/* Memory Info */
|
|
/*=============*/
|
|
#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
|
|
#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
|
|
#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
|
|
#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
|
|
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
|
|
#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
|
|
#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
|
|
/*====================*/
|
|
/* Serial Driver info */
|
|
/*====================*/
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
|
|
#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
|
|
#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
|
|
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
|
|
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
/*===================*/
|
|
/* I2C Configuration */
|
|
/*===================*/
|
|
#define CONFIG_HARD_I2C
|
|
#define CONFIG_DRIVER_DAVINCI_I2C
|
|
#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
|
|
#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
|
|
/*==================================*/
|
|
/* Network & Ethernet Configuration */
|
|
/*==================================*/
|
|
#define CONFIG_DRIVER_TI_EMAC
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DEFAULT
|
|
#define CONFIG_BOOTP_DNS
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
/*=====================*/
|
|
/* Flash & Environment */
|
|
/*=====================*/
|
|
#ifdef CFG_USE_NAND
|
|
#undef CFG_ENV_IS_IN_FLASH
|
|
#define CFG_NO_FLASH
|
|
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
|
|
#ifdef CFG_NAND_SMALLPAGE
|
|
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
|
|
#define CFG_ENV_SIZE SZ_16K
|
|
#else
|
|
#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
|
|
#define CFG_ENV_SIZE SZ_128K
|
|
#endif
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
|
|
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
|
|
#define CFG_NAND_BASE 0x02000000
|
|
#define CFG_NAND_HW_ECC
|
|
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
|
#define NAND_MAX_CHIPS 1
|
|
#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
|
|
#define DEF_BOOTM ""
|
|
#elif defined(CFG_USE_NOR)
|
|
#ifdef CONFIG_NOR_UART_BOOT
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
|
|
#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
|
|
#else
|
|
#undef CONFIG_SKIP_LOWLEVEL_INIT
|
|
#undef CONFIG_SKIP_RELOCATE_UBOOT
|
|
#endif
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#undef CFG_NO_FLASH
|
|
#define CFG_FLASH_CFI_DRIVER
|
|
#define CFG_FLASH_CFI
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
|
|
#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
|
|
#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
|
|
#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
|
|
#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
|
|
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
|
|
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
|
|
#endif
|
|
/*==============================*/
|
|
/* U-Boot general configuration */
|
|
/*==============================*/
|
|
#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
|
|
#define CONFIG_MISC_INIT_R
|
|
#undef CONFIG_BOOTDELAY
|
|
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
|
|
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CFG_LONGHELP
|
|
#define CONFIG_CRC32_VERIFY
|
|
#define CONFIG_MX_CYCLIC
|
|
/*===================*/
|
|
/* Linux Information */
|
|
/*===================*/
|
|
#define LINUX_BOOT_PARAM_ADDR 0x80000100
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
|
|
#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
|
|
/*=================*/
|
|
/* U-Boot commands */
|
|
/*=================*/
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SAVES
|
|
#define CONFIG_CMD_EEPROM
|
|
#undef CONFIG_CMD_BDI
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_SETGETDCR
|
|
#ifdef CFG_USE_NAND
|
|
#undef CONFIG_CMD_FLASH
|
|
#undef CONFIG_CMD_IMLS
|
|
#define CONFIG_CMD_NAND
|
|
#elif defined(CFG_USE_NOR)
|
|
#define CONFIG_CMD_JFFS2
|
|
#else
|
|
#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
|
|
#endif
|
|
/*=======================*/
|
|
/* KGDB support (if any) */
|
|
/*=======================*/
|
|
#ifdef CONFIG_CMD_KGDB
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
#endif /* __CONFIG_H */
|
|
|