upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Aaron Williams a90b9575f3 cfi_flash driver - Add delay after reset command ... I ran into a problem where the reset was failing except when I enabled debugging support. After talking with Garret Swalling at Spansion I was told that the GL-N series of devices require a 500ns wait for the reset to complete. The below patch adds a 1us delay after all reset commands. -Aaron Williams Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com> Signed-off-by: Stefan Roese <sr@denx.de>		14 years ago
..
nand	NAND: rearrange ONFI revision checking, add ONFI 2.3	14 years ago
onenand	Switch from archive libraries to partial linking	14 years ago
spi	sf: sst: add support for SST25VF064C	14 years ago
ubi	Switch from archive libraries to partial linking	14 years ago
Makefile	Switch from archive libraries to partial linking	14 years ago
at45.c	…
cfi_flash.c	cfi_flash driver - Add delay after reset command	14 years ago
cfi_mtd.c	cfi_flash: Remove uneccessary #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT	15 years ago
dataflash.c	…
jedec_flash.c	add AM29F400BB to table of supported legacy flashs	14 years ago
mtdconcat.c	…
mtdcore.c	Followup fixes on the mtdparts spread patchset	15 years ago
mtdpart.c	nand: remove dead code and suspend/resume	15 years ago
mw_eeprom.c	…
spr_smi.c	mod change 755 => 644 for multiple files	15 years ago