upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/trab
Wolfgang Denk d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 19 years ago
..
Makefile More GCC 4.x woes 19 years ago
Pt1000_temp_data.h
README.kbd
auto_update.c
cmd_trab.c
config.mk
flash.c
lowlevel_init.S
memory.c GCC-4.x fixes: clean up global data pointer initialization for all boards. 19 years ago
rs485.c
rs485.h
trab.c GCC-4.x fixes: clean up global data pointer initialization for all boards. 19 years ago
trab_fkt.c
tsc2000.c
tsc2000.h
u-boot.lds
vfd.c GCC-4.x fixes: clean up global data pointer initialization for all boards. 19 years ago

README.kbd


The TRAB keyboard implementation is similar to that for LWMON and
R360MPI boards. The only difference concerns key naming. There are 4
keys on TRAB: 1, 2, 3, 4.

1) The "kbd" command provides information about the current state of
the keys. For example,

TRAB # kbd
Keys: 1 0 1 0

means that keys 1 and 3 are pressed. The keyboard status is also
stored in the "keybd" environment variable. In this example we get

keybd=1010

2) The "preboot" variable is set according to current environment
settings and keys pressed. This is an example:

TRAB # setenv magic_keys XY
TRAB # setenv key_magicX 12
TRAB # setenv key_cmdX echo ## Keys 1 + 2 pressed ##\;echo
TRAB # setenv key_magicY 13
TRAB # setenv key_cmdY echo ## Keys 1 + 3 pressed ##\;echo

Here "magic_keys=XY" means that the "key_magicX" and "key_magicY"
variables will be checked for a match. Each variable "key_magic*"
defines a set of keys. In the our example, if keys 1 and 3 are
pressed during reset, then "key_magicY" matches, so the "preboot"
variable will be set to the contents of "key_cmdY":

preboot=echo ## Keys 1 + 3 pressed ##;echo

3) The TRAB board has optional modem support. When a certain key
combination is pressed on the keyboard at power-on, the firmware
performs the necessary initialization of the modem and allows for
dial-in. The key combination is specified in the
"include/configs/trab.h" file. For example:

#define CONFIG_MODEM_KEY_MAGIC "23"

means that modem will be initialized if and only if both keys 2, 3
are pressed. Note that the format of this string is similar to the
format of "key_magic*" environment variables described above.