upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
139 lines
4.9 KiB
139 lines
4.9 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
|
|
|
|
long int fixed_sdram( void );
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the external bus controller/chip selects
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr( ebccfga, xbcfg );
|
|
reg = mfdcr( ebccfgd );
|
|
mtdcr( ebccfgd, reg | 0x04000000 ); /* Set ATC */
|
|
|
|
mtebc( pb0ap, 0x92015480 ); /* FLASH/SRAM */
|
|
mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
|
|
/* test-only: other regs still missing... */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr( uic0sr, 0xffffffff ); /* clear all */
|
|
mtdcr( uic0er, 0x00000000 ); /* disable all */
|
|
mtdcr( uic0cr, 0x00000009 ); /* SMI & UIC1 crit are critical */
|
|
mtdcr( uic0pr, 0xfffffe13 ); /* per ref-board manual */
|
|
mtdcr( uic0tr, 0x01c00008 ); /* per ref-board manual */
|
|
mtdcr( uic0vr, 0x00000001 ); /* int31 highest, base=0x000 */
|
|
mtdcr( uic0sr, 0xffffffff ); /* clear all */
|
|
|
|
mtdcr( uic1sr, 0xffffffff ); /* clear all */
|
|
mtdcr( uic1er, 0x00000000 ); /* disable all */
|
|
mtdcr( uic1cr, 0x00000000 ); /* all non-critical */
|
|
mtdcr( uic1pr, 0xffffe0ff ); /* per ref-board manual */
|
|
mtdcr( uic1tr, 0x00ffc000 ); /* per ref-board manual */
|
|
mtdcr( uic1vr, 0x00000001 ); /* int31 highest, base=0x000 */
|
|
mtdcr( uic1sr, 0xffffffff ); /* clear all */
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int checkboard (void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
get_sys_info(&sysinfo);
|
|
|
|
printf("Board: esd CPCI-440\n");
|
|
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
|
|
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
|
|
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
|
|
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
|
|
printf("\tEPB: %lu MHz\n", sysinfo.freqEPB/1000000);
|
|
return (0);
|
|
}
|
|
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
dram_size = fixed_sdram();
|
|
return dram_size;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
*
|
|
* Assumes: 64 MB, non-ECC, non-registered
|
|
* PLB @ 133 MHz
|
|
*
|
|
************************************************************************/
|
|
long int fixed_sdram( void )
|
|
{
|
|
uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup some default
|
|
*------------------------------------------------------------------*/
|
|
mtsdram( mem_uabba, 0x00000000 ); /* ubba=0 (default) */
|
|
mtsdram( mem_slio, 0x00000000 ); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram( mem_devopt,0x00000000 ); /* dll=0 ds=0 (normal) */
|
|
mtsdram( mem_wddctr,0x40000000 ); /* wrcp=0 dcd=0 */
|
|
mtsdram( mem_clktr, 0x40000000 ); /* clkp=1 (90 deg wr) dcdt=0 */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup for board-specific specific mem
|
|
*------------------------------------------------------------------*/
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
|
|
mtsdram( mem_tr0, 0x410a4012 );/* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
|
/* RA=10 RD=3 */
|
|
mtsdram( mem_tr1, 0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
|
|
mtsdram( mem_rtr, 0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB */
|
|
mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM */
|
|
udelay( 400 ); /* Delay 200 usecs (min) */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*------------------------------------------------------------------*/
|
|
mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit */
|
|
for(;;)
|
|
{
|
|
mfsdram( mem_mcsts, reg );
|
|
if( reg & 0x80000000 )
|
|
break;
|
|
}
|
|
|
|
return( 64 * 1024 * 1024 ); /* 64 MB */
|
|
}
|
|
|