upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds

114 lines
2.0 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de
*
* Copyright 2009 Freescale Semiconductor, Inc.
*/
#include "config.h"
OUTPUT_ARCH(powerpc)
#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
PHDRS
{
text PT_LOAD;
bss PT_LOAD;
}
#endif
SECTIONS
{
. = CONFIG_SPL_TEXT_BASE;
.text : {
*(.text*)
}
_etext = .;
.reloc : {
_GOT2_TABLE_ = .;
KEEP(*(.got2))
KEEP(*(.got))
_FIXUP_TABLE_ = .;
KEEP(*(.fixup))
}
__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
. = ALIGN(8);
.data : {
*(.rodata*)
*(.data*)
*(.sdata*)
}
_edata = .;
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
}
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(8);
__init_begin = .;
__init_end = .;
_end = .;
#ifdef CONFIG_SPL_SKIP_RELOCATE
. = ALIGN(4);
__bss_start = .;
.bss : {
*(.sbss*)
*(.bss*)
}
. = ALIGN(4);
__bss_end = .;
#endif
/* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */
#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
.bootpg ADDR(.text) - 0x1000 :
{
KEEP(*(.bootpg))
} :text = 0xffff
#else
#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
#ifndef BOOT_PAGE_OFFSET
#define BOOT_PAGE_OFFSET 0x1000
#endif
.bootpg ADDR(.text) + BOOT_PAGE_OFFSET :
{
arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
}
#ifndef RESET_VECTOR_OFFSET
#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
#endif
#elif defined(CONFIG_FSL_ELBC)
#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
#else
#error unknown NAND controller
#endif
.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
KEEP(*(.resetvec))
} = 0xffff
#endif
#ifndef CONFIG_SPL_SKIP_RELOCATE
/*
* Make sure that the bss segment isn't linked at 0x0, otherwise its
* address won't be updated during relocation fixups.
*/
. |= 0x10;
. = ALIGN(4);
__bss_start = .;
.bss : {
*(.sbss*)
*(.bss*)
}
. = ALIGN(4);
__bss_end = .;
#endif
}