upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

kevin.morfitt@fearnside-systems.co.uk 3d1988ab47 Clean-up of s3c24x0 nand driver ... This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes to add support for the Embest SBC2440-II Board. The changes are as follows: - re-indent the code using Lindent - make sure register layouts are defined using a C struct - replace the upper-case typedef'ed C struct names with lower case non-typedef'ed ones - make sure registers are accessed using the proper accessor functions - run checkpatch.pl and fix any error reports It assumes the following patch has been applied first: - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 - patches 1/4, 2/4 and 3/4 of this series Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have any s3c2400 or s3c2410 boards but need this patch applying before I can submit patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400, smdk2410 and trab configs to use the mtd nand driver (which isn't used by any board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or errors were found. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>		15 years ago
..
nand	Clean-up of s3c24x0 nand driver	15 years ago
onenand	s5pc1xx: support onenand driver	15 years ago
spi	…
ubi	…
Makefile	…
at45.c	…
cfi_flash.c	Support up to 7 banks for ids as specified in JEDEC JEP106Z	16 years ago
cfi_mtd.c	…
dataflash.c	…
jedec_flash.c	Support up to 7 banks for ids as specified in JEDEC JEP106Z	16 years ago
mtdconcat.c	…
mtdcore.c	…
mtdpart.c	…
mw_eeprom.c	…