upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
128 lines
3.0 KiB
128 lines
3.0 KiB
/*
|
|
* National Semiconductor DP83848 PHY Driver for TI DaVinci
|
|
* (TMS320DM644x) based boards.
|
|
*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* --------------------------------------------------------
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <dp83848.h>
|
|
#include <asm/arch/emac_defs.h>
|
|
#include "../../../../../drivers/net/davinci_emac.h"
|
|
|
|
#ifdef CONFIG_DRIVER_TI_EMAC
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
|
|
int dp83848_is_phy_connected(int phy_addr)
|
|
{
|
|
u_int16_t id1, id2;
|
|
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
|
|
return(0);
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
|
|
return(0);
|
|
|
|
if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
|
|
return(1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
int dp83848_get_link_speed(int phy_addr)
|
|
{
|
|
u_int16_t tmp;
|
|
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
|
|
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
|
|
return(0);
|
|
|
|
if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
|
|
return(0);
|
|
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
|
|
return(0);
|
|
|
|
/* Speed doesn't matter, there is no setting for it in EMAC... */
|
|
if (tmp & DP83848_DUPLEX) {
|
|
/* set DM644x EMAC for Full Duplex */
|
|
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
|
|
EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
|
|
} else {
|
|
/*set DM644x EMAC for Half Duplex */
|
|
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
|
|
}
|
|
|
|
return(1);
|
|
}
|
|
|
|
|
|
int dp83848_init_phy(int phy_addr)
|
|
{
|
|
int ret = 1;
|
|
|
|
if (!dp83848_get_link_speed(phy_addr)) {
|
|
/* Try another time */
|
|
udelay(100000);
|
|
ret = dp83848_get_link_speed(phy_addr);
|
|
}
|
|
|
|
/* Disable PHY Interrupts */
|
|
davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
|
|
|
|
return(ret);
|
|
}
|
|
|
|
|
|
int dp83848_auto_negotiate(int phy_addr)
|
|
{
|
|
u_int16_t tmp;
|
|
|
|
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
|
|
return(0);
|
|
|
|
/* Restart Auto_negotiation */
|
|
tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
|
|
tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
|
|
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
|
|
|
|
/* Set the Auto_negotiation Advertisement Register
|
|
* MII advertising for Next page, 100BaseTxFD and HD,
|
|
* 10BaseTFD and HD, IEEE 802.3
|
|
*/
|
|
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
|
|
DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
|
|
davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
|
|
|
|
|
|
/* Read Control Register */
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
|
|
return(0);
|
|
|
|
tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
|
|
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
|
|
|
|
/* Restart Auto_negotiation */
|
|
tmp |= DP83848_RESTART_AUTONEG;
|
|
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
|
|
|
|
/*check AutoNegotiate complete */
|
|
udelay(10000);
|
|
if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
|
|
return(0);
|
|
|
|
if (!(tmp & DP83848_AUTONEG_COMP))
|
|
return(0);
|
|
|
|
return (dp83848_get_link_speed(phy_addr));
|
|
}
|
|
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
#endif /* CONFIG_DRIVER_ETHER */
|
|
|