upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
425 lines
9.5 KiB
425 lines
9.5 KiB
/*
|
|
* (C) Copyright 2013
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <pca9698.h>
|
|
#include <watchdog.h>
|
|
#include "../common/dp501.h"
|
|
#include "controlcenterd-id.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum {
|
|
HWVER_100 = 0,
|
|
HWVER_110 = 1,
|
|
HWVER_120 = 2,
|
|
};
|
|
|
|
struct ihs_fpga {
|
|
u32 reflection_low; /* 0x0000 */
|
|
u32 versions; /* 0x0004 */
|
|
u32 fpga_version; /* 0x0008 */
|
|
u32 fpga_features; /* 0x000c */
|
|
};
|
|
|
|
#ifndef CONFIG_TRAILBLAZER
|
|
static struct pci_device_id hydra_supported[] = {
|
|
{ 0x6d5e, 0xcdc0 },
|
|
{}
|
|
};
|
|
|
|
static void hydra_initialize(void);
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
|
|
|
|
/* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */
|
|
clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000);
|
|
|
|
/* Set pmuxcr to allow both i2c1 and i2c2 */
|
|
setbits_be32(&gur->pmuxcr, 0x00001000);
|
|
|
|
/* Set pmuxcr to enable GPIO 3_11-3_13 */
|
|
setbits_be32(&gur->pmuxcr, 0x00000010);
|
|
|
|
/* Set pmuxcr to enable GPIO 2_31,3_9+10 */
|
|
setbits_be32(&gur->pmuxcr, 0x00000020);
|
|
|
|
/* Set pmuxcr to enable GPIO 2_28-2_30 */
|
|
setbits_be32(&gur->pmuxcr, 0x000000c0);
|
|
|
|
/* Set pmuxcr to enable GPIO 3_20-3_22 */
|
|
setbits_be32(&gur->pmuxcr2, 0x03000000);
|
|
|
|
/* Set pmuxcr to enable IRQ0-2 */
|
|
clrbits_be32(&gur->pmuxcr, 0x00000300);
|
|
|
|
/* Set pmuxcr to disable IRQ3-11 */
|
|
setbits_be32(&gur->pmuxcr, 0x000000F0);
|
|
|
|
/* Read back the register to synchronize the write. */
|
|
in_be32(&gur->pmuxcr);
|
|
|
|
/* Set the pin muxing to enable ETSEC2. */
|
|
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
|
|
|
|
#ifdef CONFIG_TRAILBLAZER
|
|
/*
|
|
* GPIO3_10 SPERRTRIGGER
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, 0x00200000);
|
|
clrbits_be32(&pgpio->gpdat, 0x00200000);
|
|
udelay(100);
|
|
setbits_be32(&pgpio->gpdat, 0x00200000);
|
|
udelay(100);
|
|
clrbits_be32(&pgpio->gpdat, 0x00200000);
|
|
#endif
|
|
|
|
/*
|
|
* GPIO3_11 CPU-TO-FPGA-RESET#
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, 0x00100000);
|
|
clrbits_be32(&pgpio->gpdat, 0x00100000);
|
|
|
|
/*
|
|
* GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER#
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, 0x00000400);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: ControlCenter DIGITAL\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A list of PCI and SATA slots
|
|
*/
|
|
enum slot_id {
|
|
SLOT_PCIE1 = 1,
|
|
SLOT_PCIE2,
|
|
SLOT_PCIE3,
|
|
SLOT_PCIE4,
|
|
SLOT_PCIE5,
|
|
SLOT_SATA1,
|
|
SLOT_SATA2
|
|
};
|
|
|
|
/*
|
|
* This array maps the slot identifiers to their names on the P1022DS board.
|
|
*/
|
|
static const char * const slot_names[] = {
|
|
[SLOT_PCIE1] = "Slot 1",
|
|
[SLOT_PCIE2] = "Slot 2",
|
|
[SLOT_PCIE3] = "Slot 3",
|
|
[SLOT_PCIE4] = "Slot 4",
|
|
[SLOT_PCIE5] = "Mini-PCIe",
|
|
[SLOT_SATA1] = "SATA 1",
|
|
[SLOT_SATA2] = "SATA 2",
|
|
};
|
|
|
|
/*
|
|
* This array maps a given SERDES configuration and SERDES device to the PCI or
|
|
* SATA slot that it connects to. This mapping is hard-coded in the FPGA.
|
|
*/
|
|
static u8 serdes_dev_slot[][SATA2 + 1] = {
|
|
[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
|
|
[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
|
|
[PCIE2] = SLOT_PCIE5 },
|
|
[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
|
|
[PCIE2] = SLOT_PCIE3 },
|
|
[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
|
|
[PCIE2] = SLOT_PCIE3,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1c] = { [PCIE1] = SLOT_PCIE1,
|
|
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
|
|
[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
|
|
[0x1f] = { [PCIE1] = SLOT_PCIE1 },
|
|
};
|
|
|
|
|
|
/*
|
|
* Returns the name of the slot to which the PCIe or SATA controller is
|
|
* connected
|
|
*/
|
|
const char *board_serdes_name(enum srds_prtcl device)
|
|
{
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
u32 pordevsr = in_be32(&gur->pordevsr);
|
|
unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
|
|
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
|
|
enum slot_id slot = serdes_dev_slot[srds_cfg][device];
|
|
const char *name = slot_names[slot];
|
|
|
|
if (name)
|
|
return name;
|
|
else
|
|
return "Nothing";
|
|
}
|
|
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
|
|
|
|
clrbits_be32(&pgpio->gpdat, 0x00000400);
|
|
setbits_be32(&pgpio->gpdat, 0x00000400);
|
|
}
|
|
|
|
#ifdef CONFIG_TRAILBLAZER
|
|
int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rcode = 0;
|
|
|
|
if (run_command(getenv("bootcmd"), flag) < 0)
|
|
rcode = 1;
|
|
return rcode;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
|
|
|
|
/*
|
|
* GPIO3_12 PPC_SYSTEMREADY#
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, 0x00080000);
|
|
setbits_be32(&pgpio->gpodr, 0x00080000);
|
|
clrbits_be32(&pgpio->gpdat, 0x00080000);
|
|
|
|
return ccdm_compute_self_hash();
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
startup_ccdm_id_module();
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
|
|
hydra_initialize();
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
unsigned int k = 0;
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
|
|
|
|
/* wait for FPGA configuration to finish */
|
|
while (!pca9698_get_value(0x22, 11) && (k++ < 30))
|
|
udelay(100000);
|
|
|
|
if (k > 30) {
|
|
puts("FPGA configuration timed out.\n");
|
|
} else {
|
|
/* clear FPGA reset */
|
|
udelay(1000);
|
|
setbits_be32(&pgpio->gpdat, 0x00100000);
|
|
}
|
|
|
|
/* give time for PCIe link training */
|
|
udelay(100000);
|
|
|
|
/*
|
|
* GPIO3_12 PPC_SYSTEMREADY#
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, 0x00080000);
|
|
setbits_be32(&pgpio->gpodr, 0x00080000);
|
|
clrbits_be32(&pgpio->gpdat, 0x00080000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
/* Turn on Parade DP501 */
|
|
pca9698_direction_output(0x22, 7, 1);
|
|
udelay(500000);
|
|
|
|
dp501_powerup(0x08);
|
|
|
|
startup_ccdm_id_module();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize on-board and/or PCI Ethernet devices
|
|
*
|
|
* Returns:
|
|
* <0, error
|
|
* 0, no ethernet devices found
|
|
* >0, number of ethernet devices initialized
|
|
*/
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[2];
|
|
unsigned int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
}
|
|
#endif
|
|
|
|
static void hydra_initialize(void)
|
|
{
|
|
unsigned int i;
|
|
pci_dev_t devno;
|
|
|
|
/* Find and probe all the matching PCI devices */
|
|
for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) {
|
|
u32 val;
|
|
struct ihs_fpga *fpga;
|
|
u32 versions;
|
|
u32 fpga_version;
|
|
u32 fpga_features;
|
|
|
|
unsigned hardware_version;
|
|
unsigned feature_uart_channels;
|
|
unsigned feature_sb_channels;
|
|
|
|
/* Try to enable I/O accesses and bus-mastering */
|
|
val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
pci_write_config_dword(devno, PCI_COMMAND, val);
|
|
|
|
/* Make sure it worked */
|
|
pci_read_config_dword(devno, PCI_COMMAND, &val);
|
|
if (!(val & PCI_COMMAND_MEMORY)) {
|
|
puts("Can't enable I/O memory\n");
|
|
continue;
|
|
}
|
|
if (!(val & PCI_COMMAND_MASTER)) {
|
|
puts("Can't enable bus-mastering\n");
|
|
continue;
|
|
}
|
|
|
|
/* read FPGA details */
|
|
fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
|
|
PCI_REGION_MEM);
|
|
|
|
versions = readl(fpga->versions);
|
|
fpga_version = readl(fpga->fpga_version);
|
|
fpga_features = readl(fpga->fpga_features);
|
|
|
|
hardware_version = versions & 0xf;
|
|
feature_uart_channels = (fpga_features >> 6) & 0x1f;
|
|
feature_sb_channels = fpga_features & 0x1f;
|
|
|
|
printf("FPGA%d: ", i);
|
|
|
|
switch (hardware_version) {
|
|
case HWVER_100:
|
|
printf("HW-Ver 1.00\n");
|
|
break;
|
|
|
|
case HWVER_110:
|
|
printf("HW-Ver 1.10\n");
|
|
break;
|
|
|
|
case HWVER_120:
|
|
printf("HW-Ver 1.20\n");
|
|
break;
|
|
|
|
default:
|
|
printf("HW-Ver %d(not supported)\n",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
|
|
printf(" FPGA V %d.%02d, features:",
|
|
fpga_version / 100, fpga_version % 100);
|
|
|
|
printf(" %d uart channel(s)", feature_uart_channels);
|
|
printf(" %d sideband channel(s)\n", feature_sb_channels);
|
|
}
|
|
}
|
|
#endif
|
|
|