upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/Makefile

932 lines
26 KiB

#
# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/powerpc/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr A-Z a-z | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTARCH
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
export TOPDIR
ifeq (include/config.mk,$(wildcard include/config.mk))
# load ARCH, BOARD, and CPU configuration
include include/config.mk
export ARCH CPU BOARD VENDOR
# load other configuration
include $(TOPDIR)/config.mk
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
endif
ifeq ($(ARCH),i386)
ifeq ($(HOSTARCH),i386)
CROSS_COMPILE =
else
CROSS_COMPILE = i386-linux-
endif
endif
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
endif
endif
export CROSS_COMPILE
# The "tools" are needed early, so put this first
SUBDIRS = tools \
lib_generic \
lib_$(ARCH) \
cpu/$(CPU) \
board/$(BOARDDIR) \
common \
disk \
fs \
net \
rtc \
dtt \
drivers \
drivers/sk98lin \
post \
post/cpu \
examples
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
LIBS = board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
LIBS += lib_generic/libgeneric.a
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) -print-libgcc-file-name`) -lgcc
#########################################################################
#########################################################################
ALL = u-boot.srec u-boot.bin System.map
all: $(ALL)
u-boot.srec: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
u-boot.bin: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
u-boot.img: u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
--start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
-Map u-boot.map -o u-boot
subdirs:
@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done
gdbtools:
$(MAKE) -C tools/gdb || exit 1
depend dep:
@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
tags:
ctags -w `find $(SUBDIRS) include \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
etags -a `find $(SUBDIRS) include \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
System.map: u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > System.map
#########################################################################
else
all install u-boot u-boot.srec depend dep:
@echo "System not configured - see README" >&2
@ exit 1
endif
#########################################################################
unconfig:
rm -f include/config.h include/config.mk
#========================================================================
# PowerPC
#========================================================================
#########################################################################
## MPC5xx Systems
#########################################################################
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
#########################################################################
## MPC5xxx Systems
#########################################################################
IceCube_5200_config \
IceCube_5100_config: unconfig
@ >include/config.h
@[ -z "$(findstring _5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>include/config.h ; \
echo "... with MPC5200 processor" ; \
}
@[ -z "$(findstring _5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>include/config.h ; \
echo "... with MGT5100 processor" ; \
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
#########################################################################
## MPC8xx Systems
#########################################################################
AdderII_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx adderII
ADS860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
c2mon_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx c2mon
CCM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx cogent
ELPT860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
ESTEEM192E_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx esteem192e
ETX094_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx etx094
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
FLAGADM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
GEN860T_SC_config \
GEN860T_config: unconfig
@ >include/config.h
@[ -z "$(findstring _SC,$@)" ] || \
{ echo "#define CONFIG_SC" >>include/config.h ; \
echo "With reduced H/W feature set (SC)..." ; \
}
@./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
GENIETV_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx genietv
GTH_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx gth
hermes_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx hermes
IAD210_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
ICU862_100MHz_config \
ICU862_config: unconfig
@ >include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
IP860_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@ >include/config.h
@[ -z "$(findstring IVML24_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_16M" >>include/config.h ; \
}
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_32M" >>include/config.h ; \
}
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_64M" >>include/config.h ; \
}
@./mkconfig -a IVML24 ppc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@ >include/config.h
@[ -z "$(findstring IVMS8_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \
}
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \
}
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \
}
@./mkconfig -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx kup4k
LANTEC_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx lantec
lwmon_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx mbx8xx
MHPC_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec
MVS1_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx mvs1
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
NETVIA_V2_config \
NETVIA_config: unconfig
@ >include/config.h
@[ -z "$(findstring NETVIA_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
echo "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
echo "... Version 2" ; \
}
@./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
RBC823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx rbc823
RPXClassic_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
RPXlite_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
rmu_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RRvision
RRvision_LCD_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
@./mkconfig -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
SPD823TS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
svm_sc8xx_config: unconfig
@ >include/config.h
@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
# but only 855 and 860 boards may come with FEC
# and 823 boards may have LCD support
xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
TQM823L_66MHz_config \
TQM823L_80MHz_config \
TQM823L_LCD_config \
TQM823L_LCD_66MHz_config \
TQM823L_LCD_80MHz_config \
TQM850L_config \
TQM850L_66MHz_config \
TQM850L_80MHz_config \
TQM855L_config \
TQM855L_66MHz_config \
TQM855L_80MHz_config \
TQM860L_config \
TQM860L_66MHz_config \
TQM860L_80MHz_config \
TQM862L_config \
TQM862L_66MHz_config \
TQM862L_80MHz_config \
TQM823M_config \
TQM823M_66MHz_config \
TQM823M_80MHz_config \
TQM850M_config \
TQM850M_66MHz_config \
TQM850M_80MHz_config \
TQM855M_config \
TQM855M_66MHz_config \
TQM855M_80MHz_config \
TQM860M_config \
TQM860M_66MHz_config \
TQM860M_80MHz_config \
TQM862M_config \
TQM862M_66MHz_config \
TQM862M_80MHz_config \
TQM862M_100MHz_config: unconfig
@ >include/config.h
@[ -z "$(findstring _66MHz,$@)" ] || \
{ echo "#define CONFIG_66MHz" >>include/config.h ; \
echo "... with 66MHz system clock" ; \
}
@[ -z "$(findstring _80MHz,$@)" ] || \
{ echo "#define CONFIG_80MHz" >>include/config.h ; \
echo "... with 80MHz system clock" ; \
}
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>include/config.h ; \
echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \
echo "... with LCD display" ; \
}
@./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
TTTech_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
v37_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
@./mkconfig $(@:_config=) ppc mpc8xx v37
#########################################################################
## PPC4xx Systems
#########################################################################
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
AR405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
BUBINGA405EP_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
CPCI405_config \
CPCI4052_config \
CPCI405AB_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
CPCI440_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd
CPCIISER4_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
CRAYL1_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx L1 cray
DASA_SIM_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
DU405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
EBONY_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ebony
ERIC_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx eric
EXBITGEN_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
MIP405_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
MIP405T_config:unconfig
@echo "#define CONFIG_MIP405T" >include/config.h
@echo "Enable subset config for MIP405T"
@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
ML2_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ml2
OCRTC_config \
ORSG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
PCI405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
PIP405_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
PPChameleonEVB_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx PPChameleonEVB dave
W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
WALNUT405_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx walnut405
#########################################################################
## MPC824x Systems
#########################################################################
xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
A3000_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x a3000
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
@./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
@cd ./include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
echo "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x cu824
MOUSSE_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x musenki
OXC_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x oxc
PN62_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x pn62
Sandpoint8240_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sandpoint
Sandpoint8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sandpoint
SL8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
cogent_mpc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86
@cd ./include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
echo "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
ep8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ep8260
gw8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 gw8260
hymod_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 hymod
IPHASE4539_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
MPC8260ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
PM825_config \
PM825_ROMBOOT_config: unconfig
@echo "#define CONFIG_PCI" >include/config.h
@./mkconfig -a PM826 ppc mpc8260 pm826
@cd ./include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
echo "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk; \
PM826_config \
PM826_ROMBOOT_config: unconfig
@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
@cd ./include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
echo "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk; \
ppmc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
RPXsuper_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
rsdproto_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 rsdproto
sacsng_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 sacsng
sbc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 sbc8260
SCM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8265_AA_config: unconfig
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
>include/config.h ; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" == "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>include/config.h ; \
echo "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \
echo "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" == "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
echo "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \
echo "... without 60x Bus Mode" ; \
fi
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
atc_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 atc
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
EVB64260_config \
EVB64260_750CX_config: unconfig
@./mkconfig EVB64260 ppc 74xx_7xx evb64260
ZUMA_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
BAB7xx_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
ELPPC_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
P3G4_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
# ARM
#========================================================================
#########################################################################
## StrongARM Systems
#########################################################################
at91rm9200dk_config : unconfig
@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
lart_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 lart
dnp1110_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 dnp1110
shannon_config : unconfig
@./mkconfig $(@:_config=) arm sa1100 shannon
#########################################################################
## ARM92xT Systems
#########################################################################
xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
omap1610inn_config : unconfig
@./mkconfig $(@:_config=) arm arm926ejs omap1610inn
smdk2400_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2400
smdk2410_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2410
trab_config \
trab_big_flash_config: unconfig
@ >include/config.h
@[ -z "$(findstring _big_flash,$@)" ] || \
{ echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \
echo "... with big flash support" ; \
}
@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
VCMA9_config : unconfig
@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
#########################################################################
## ARM720T Systems
#########################################################################
impa7_config : unconfig
@./mkconfig $(@:_config=) arm arm720t impa7
ep7312_config : unconfig
@./mkconfig $(@:_config=) arm arm720t ep7312
#########################################################################
## XScale Systems
#########################################################################
cradle_config : unconfig
@./mkconfig $(@:_config=) arm pxa cradle
csb226_config : unconfig
@./mkconfig $(@:_config=) arm pxa csb226
innokom_config : unconfig
@./mkconfig $(@:_config=) arm pxa innokom
lubbock_config : unconfig
@./mkconfig $(@:_config=) arm pxa lubbock
logodl_config : unconfig
@./mkconfig $(@:_config=) arm pxa logodl
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
#========================================================================
# i386
#========================================================================
#########################################################################
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig
@./mkconfig $(@:_config=) i386 i386 sc520_cdp
sc520_spunk_config : unconfig
@./mkconfig $(@:_config=) i386 i386 sc520_spunk
sc520_spunk_rel_config : unconfig
@./mkconfig $(@:_config=) i386 i386 sc520_spunk
#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################
xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@ >include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
echo "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
echo "... with 150MHz system clock" ; \
}
@./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
#########################################################################
## MIPS64 5Kc
#########################################################################
purple_config : unconfig
@./mkconfig $(@:_config=) mips mips purple
#########################################################################
#########################################################################
clean:
find . -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
examples/mem_to_mem_idma2intr examples/82559_eeprom
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
rm -f tools/easylogo/easylogo tools/bmp_logo
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
clobber: clean
find . -type f \
\( -name .depend -o -name '*.srec' -o -name '*.bin' \) \
-print \
| xargs rm -f
rm -f $(OBJS) *.bak tags TAGS
rm -fr *.*~
rm -f u-boot u-boot.map $(ALL)
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
rm -f include/asm/proc include/asm/arch include/asm
mrproper \
distclean: clobber unconfig
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################