upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
127 lines
3.2 KiB
127 lines
3.2 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <linux/libfdt.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/armv8/mmu.h>
|
|
|
|
/* Armada 7k/8k */
|
|
#define MVEBU_RFU_BASE (MVEBU_REGISTER(0x6f0000))
|
|
#define RFU_GLOBAL_SW_RST (MVEBU_RFU_BASE + 0x84)
|
|
#define RFU_SW_RESET_OFFSET 0
|
|
|
|
/*
|
|
* The following table includes all memory regions for Armada 7k and
|
|
* 8k SoCs. The Armada 7k is missing the CP110 slave regions here. Lets
|
|
* define these regions at the beginning of the struct so that they
|
|
* can be easier removed later dynamically if an Armada 7k device is detected.
|
|
* For a detailed memory map, please see doc/mvebu/armada-8k-memory.txt
|
|
*/
|
|
#define ARMADA_7K8K_COMMON_REGIONS_START 2
|
|
static struct mm_region mvebu_mem_map[] = {
|
|
/* Armada 80x0 memory regions include the CP1 (slave) units */
|
|
{
|
|
/* SRAM, MMIO regions - CP110 slave region */
|
|
.phys = 0xf4000000UL,
|
|
.virt = 0xf4000000UL,
|
|
.size = 0x02000000UL, /* 32MiB internal registers */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
/* PCI CP1 regions */
|
|
.phys = 0xfa000000UL,
|
|
.virt = 0xfa000000UL,
|
|
.size = 0x04000000UL, /* 64MiB CP110 slave PCI space */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
/* Armada 80x0 and 70x0 common memory regions start here */
|
|
{
|
|
/* RAM */
|
|
.phys = 0x0UL,
|
|
.virt = 0x0UL,
|
|
.size = 0x80000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
},
|
|
{
|
|
/* SRAM, MMIO regions - AP806 region */
|
|
.phys = 0xf0000000UL,
|
|
.virt = 0xf0000000UL,
|
|
.size = 0x01000000UL, /* 16MiB internal registers */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
/* SRAM, MMIO regions - CP110 master region */
|
|
.phys = 0xf2000000UL,
|
|
.virt = 0xf2000000UL,
|
|
.size = 0x02000000UL, /* 32MiB internal registers */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
/* PCI CP0 regions */
|
|
.phys = 0xf6000000UL,
|
|
.virt = 0xf6000000UL,
|
|
.size = 0x04000000UL, /* 64MiB CP110 master PCI space */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = mvebu_mem_map;
|
|
|
|
void enable_caches(void)
|
|
{
|
|
/*
|
|
* Armada 7k is not equipped with the CP110 slave CP. In case this
|
|
* code runs on an Armada 7k device, lets remove the CP110 slave
|
|
* entries from the memory mapping by moving the start to the
|
|
* common regions.
|
|
*/
|
|
if (of_machine_is_compatible("marvell,armada7040"))
|
|
mem_map = &mvebu_mem_map[ARMADA_7K8K_COMMON_REGIONS_START];
|
|
|
|
icache_enable();
|
|
dcache_enable();
|
|
}
|
|
|
|
void reset_cpu(ulong ignored)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(RFU_GLOBAL_SW_RST);
|
|
reg &= ~(1 << RFU_SW_RESET_OFFSET);
|
|
writel(reg, RFU_GLOBAL_SW_RST);
|
|
}
|
|
|
|
/*
|
|
* TODO - implement this functionality using platform
|
|
* clock driver once it gets available
|
|
* Return NAND clock in Hz
|
|
*/
|
|
u32 mvebu_get_nand_clock(void)
|
|
{
|
|
unsigned long NAND_FLASH_CLK_CTRL = 0xF2440700UL;
|
|
unsigned long NF_CLOCK_SEL_MASK = 0x1;
|
|
u32 reg;
|
|
|
|
reg = readl(NAND_FLASH_CLK_CTRL);
|
|
if (reg & NF_CLOCK_SEL_MASK)
|
|
return 400 * 1000000;
|
|
else
|
|
return 250 * 1000000;
|
|
}
|
|
|