upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
81 lines
1.8 KiB
81 lines
1.8 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#define PCI_DEV_CONFIG(segbus, dev, fn) ( \
|
|
(((segbus) & 0xfff) << 20) | \
|
|
(((dev) & 0x1f) << 15) | \
|
|
(((fn) & 0x07) << 12))
|
|
|
|
/* Platform Controller Unit */
|
|
#define LPC_DEV 0x1f
|
|
#define LPC_FUNC 0
|
|
|
|
/* Enable UART */
|
|
#define UART_CONT 0x80
|
|
|
|
/* UART PAD definitions */
|
|
#define UART_RXD_COMMUITY 1
|
|
#define UART_TXD_COMMUITY 1
|
|
#define UART_RXD_FAMILY 4
|
|
#define UART_TXD_FAMILY 4
|
|
#define UART_RXD_PAD 2
|
|
#define UART_TXD_PAD 7
|
|
#define UART_RXD_FUNC 3
|
|
#define UART_TXD_FUNC 3
|
|
|
|
/* IO Memory */
|
|
#define IO_BASE_ADDRESS 0xfed80000
|
|
|
|
static inline uint32_t gpio_pconf0(int community, int family, int pad)
|
|
{
|
|
return IO_BASE_ADDRESS + community * 0x8000 + 0x4400 +
|
|
family * 0x400 + pad * 8;
|
|
}
|
|
|
|
static void gpio_select_func(int community, int family, int pad, int func)
|
|
{
|
|
uint32_t pconf0_addr = gpio_pconf0(community, family, pad);
|
|
|
|
clrsetbits_le32(pconf0_addr, 0xf << 16, func << 16);
|
|
}
|
|
|
|
static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
|
|
{
|
|
unsigned long addr;
|
|
|
|
addr = CONFIG_PCIE_ECAM_BASE | dev | (where & ~3);
|
|
writel(value, addr);
|
|
}
|
|
|
|
/* This can be called after memory-mapped PCI is working */
|
|
int setup_internal_uart(int enable)
|
|
{
|
|
/* Enable or disable the legacy UART hardware */
|
|
x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
|
|
enable);
|
|
|
|
/* All done for the disable part, so just return */
|
|
if (!enable)
|
|
return 0;
|
|
|
|
/*
|
|
* Set up the pads to the UART function. This allows the signals to
|
|
* leave the chip
|
|
*/
|
|
gpio_select_func(UART_RXD_COMMUITY, UART_RXD_FAMILY,
|
|
UART_RXD_PAD, UART_RXD_FUNC);
|
|
gpio_select_func(UART_TXD_COMMUITY, UART_TXD_FAMILY,
|
|
UART_TXD_PAD, UART_TXD_FUNC);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
setup_internal_uart(1);
|
|
}
|
|
|