upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/blackfin/include/asm/mach-common/bits/dde.h

88 lines
2.9 KiB

/*
* Distributed DMA Engine (DDE) Masks
*/
#ifndef __BFIN_PERIPHERAL_DDE__
#define __BFIN_PERIPHERAL_DDE__
/* DMA_CONFIG Masks */
#define DMAEN (1 << DMAEN_P) /* DMA Channel Enable */
#define WNR (1 << WNR_P) /* Channel Direction (W/R*) */
#define SYNC (1 << SYNC_P) /* Sync Work Unit Transitions */
#define CADDR (1 << CADDR_P) /* Use Current Address */
#define PSIZE (7 << PSIZE_P) /* Peripheral Word Size */
#define PSIZE_1 (0 << PSIZE_P)
#define PSIZE_2 (1 << PSIZE_P)
#define PSIZE_4 (2 << PSIZE_P)
#define PSIZE_8 (3 << PSIZE_P)
#define MSIZE (7 << MSIZE_P) /* Memory Transfer Size */
#define MSIZE_1 (0 << MSIZE_P)
#define MSIZE_2 (1 << MSIZE_P)
#define MSIZE_4 (2 << MSIZE_P)
#define MSIZE_8 (3 << MSIZE_P)
#define MSIZE_16 (4 << MSIZE_P)
#define MSIZE_32 (5 << MSIZE_P)
#define FLOW (7 << FLOW_P) /* Next Operation */
#define FLOW_STOP (0 << FLOW_P) /* Stop Mode */
#define FLOW_AUTO (1 << FLOW_P) /* Autobuffer Mode */
#define FLOW_DSCL (4 << FLOW_P) /* Descriptor List */
#define FLOW_DSCA (5 << FLOW_P) /* Descriptor Array */
#define FLOW_DSDL (6 << FLOW_P) /* Descriptor On Demand List */
#define FLOW_DSDA (7 << FLOW_P) /* Descriptor On Demand Array */
#define NDSIZE (7 << NDSIZE_P) /* Next Descriptor Set Size */
#define NDSIZE_1 (0 << NDSIZE_P)
#define NDSIZE_2 (1 << NDSIZE_P)
#define NDSIZE_3 (2 << NDSIZE_P)
#define NDSIZE_4 (3 << NDSIZE_P)
#define NDSIZE_5 (4 << NDSIZE_P)
#define NDSIZE_6 (5 << NDSIZE_P)
#define NDSIZE_7 (6 << NDSIZE_P)
#define DI_EN_X (1 << INT_P)
#define DI_EN_Y (2 << INT_P)
#define DI_EN_P (3 << INT_P)
#define DI_EN (DI_EN_X)
#define DI_XCOUNT_EN (1 << INT_P) /* xcount expires interrupt */
#define TRIG (3 << TRIG_P) /* Generate Trigger */
#define TOVEN (1 << TOVEN_P)
#define DESCIDCPY (1 << DESCIDCPY_P)
#define TWOD (1 << TWOD_P)
#define PDRF (1 << PDRF_P)
#define DMAEN_P 0
#define WNR_P 1
#define SYNC_P 2
#define CADDR_P 3
#define PSIZE_P 4
#define MSIZE_P 8
#define FLOW_P 12
#define TWAIT_P 15
#define NDSIZE_P 16
#define INT_P 20
#define TRIG_P 22
#define TOVEN_P 24
#define DESCIDCPY_P 25
#define TWOD_P 26
#define PDRF_P 28
/* DMA_STATUS Masks */
#define DMA_DONE (1 << DMA_DONE_P) /* Work Unit/Row Done */
#define DMA_ERR (1 << DMA_ERR_P) /* Error Interrupt */
#define DMA_PIRQ (1 << DMA_PIRQ_P) /* Peri Intr Request */
#define DMA_ERRC (7 << DMA_ERRC_P) /* Error Cause */
#define DMA_RUN (7 << DMA_RUN_P) /* Run Status */
#define DMA_PBWIDTH (3 << DMA_PBWIDTH_P) /* Peri Bus Width */
#define DMA_MBWIDTH (3 << DMA_MBWIDTH_P) /* Memory Bus Width */
#define DMA_FIFOFILL (7 << DMA_FIFOFILL_P) /* FIFO Fill Status */
#define DMA_TWAIT (1 << DMA_TWAIT_P) /* Trigger Wait Stat */
#define DMA_DONE_P 0
#define DMA_ERR_P 1
#define DMA_PIRQ_P 2
#define DMA_ERRC_P 4
#define DMA_RUN_P 8
#define DMA_PBWIDTH_P 12
#define DMA_MBWIDTH_P 14
#define DMA_FIFOFILL_P 16
#define DMA_TWAIT_P 20
#endif