upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
1.5 KiB
52 lines
1.5 KiB
Texas Instruments TI SCI Generic Power Domain
|
|
=============================================
|
|
|
|
Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
|
|
responsible for controlling the state of the IPs that are present.
|
|
Communication between the host processor running an OS and the system
|
|
controller happens through a protocol known as TI SCI [1].
|
|
|
|
[1] http://processors.wiki.ti.com/index.php/TISCI
|
|
|
|
PM Domain Node
|
|
==============
|
|
The PM domain node represents the global PM domain managed by the SYSFW. Because
|
|
this relies on the TI SCI protocol to communicate with the SYSFW it must be a
|
|
child of the sysfw node.
|
|
|
|
Required Properties:
|
|
--------------------
|
|
- compatible: Must be "ti,sci-pm-domain"
|
|
- #power-domain-cells: Must be 1 so that an id can be provided in each
|
|
device node.
|
|
|
|
Example (AM65x):
|
|
----------------
|
|
sysfw: sysfw {
|
|
compatible = "ti,am654-system-controller";
|
|
...
|
|
k3_pds: power-controller {
|
|
compatible = "ti,sci-pm-domain";
|
|
#power-domain-cells = <1>;
|
|
};
|
|
};
|
|
|
|
PM Domain Consumers
|
|
===================
|
|
Hardware blocks belonging to a PM domain should contain a "power-domains"
|
|
property that is a phandle pointing to the corresponding PM domain node
|
|
along with an index representing the device id to be passed to the PMMC
|
|
for device control.
|
|
|
|
Required Properties:
|
|
--------------------
|
|
- power-domains: phandle pointing to the corresponding PM domain node
|
|
and an ID representing the device.
|
|
|
|
Example (AM65x):
|
|
----------------
|
|
uart2: serial@02800000 {
|
|
compatible = "ti,omap4-uart";
|
|
...
|
|
power-domains = <&k3_pds 0x3f>;
|
|
};
|
|
|