upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/cpc45/plx9030.c

173 lines
5.1 KiB

/* Plx9030.c - system configuration module for PLX9030 PCI to Local Bus Bridge */
/*
* (C) Copyright 2002-2003
* Josef Wagner, MicroSys GmbH, wagner@microsys.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Date Modification by
* ------- ---------------------------------------------- ---
* 30sep02 converted from VxWorks to LINUX wa
*/
/*
DESCRIPTION
This is the configuration module for the PLX9030 PCI to Local Bus Bridge.
It configures the Chip select lines for SRAM (CS0), ST16C552 (CS1,CS2), Display and local
registers (CS3) on CPC45.
*/
/* includes */
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <asm/io.h>
#include <pci.h>
/* imports */
/* defines */
#define PLX9030_VENDOR_ID 0x10B5
#define PLX9030_DEVICE_ID 0x9030
#undef PLX_DEBUG
/* PLX9030 register offsets */
#define P9030_LAS0RR 0x00
#define P9030_LAS1RR 0x04
#define P9030_LAS2RR 0x08
#define P9030_LAS3RR 0x0c
#define P9030_EROMRR 0x10
#define P9030_LAS0BA 0x14
#define P9030_LAS1BA 0x18
#define P9030_LAS2BA 0x1c
#define P9030_LAS3BA 0x20
#define P9030_EROMBA 0x24
#define P9030_LAS0BRD 0x28
#define P9030_LAS1BRD 0x2c
#define P9030_LAS2BRD 0x30
#define P9030_LAS3BRD 0x34
#define P9030_EROMBRD 0x38
#define P9030_CS0BASE 0x3C
#define P9030_CS1BASE 0x40
#define P9030_CS2BASE 0x44
#define P9030_CS3BASE 0x48
#define P9030_INTCSR 0x4c
#define P9030_CNTRL 0x50
#define P9030_GPIOC 0x54
/* typedefs */
/* locals */
static struct pci_device_id supported[] = {
{ PLX9030_VENDOR_ID, PLX9030_DEVICE_ID },
{ }
};
/* forward declarations */
void sysOutLong(ulong address, ulong value);
/***************************************************************************
*
* Plx9030Init - init CS0..CS3 for CPC45
*
*
* RETURNS: N/A
*/
void Plx9030Init (void)
{
pci_dev_t devno;
ulong membaseCsr; /* base address of device memory space */
int idx = 0; /* general index */
/* find plx9030 device */
if ((devno = pci_find_devices(supported, idx++)) < 0)
{
printf("No PLX9030 device found !!\n");
return;
}
#ifdef PLX_DEBUG
printf("PLX 9030 device found ! devno = 0x%x\n",devno);
#endif
membaseCsr = PCI_PLX9030_MEMADDR;
/* set base address */
pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, membaseCsr);
/* enable mapped memory and IO addresses */
pci_write_config_dword(devno,
PCI_COMMAND,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
/* configure GBIOC */
sysOutLong((membaseCsr + P9030_GPIOC), 0x00000FC0); /* CS2/CS3 enable */
/* configure CS0 (SRAM) */
sysOutLong((membaseCsr + P9030_LAS0BA), 0x00000001); /* enable space base */
sysOutLong((membaseCsr + P9030_LAS0RR), 0x0FE00000); /* 2 MByte */
sysOutLong((membaseCsr + P9030_LAS0BRD), 0x51928900); /* 4 wait states */
sysOutLong((membaseCsr + P9030_CS0BASE), 0x00100001); /* enable 2 MByte */
/* remap CS0 (SRAM) */
pci_write_config_dword(devno, PCI_BASE_ADDRESS_2, SRAM_BASE);
/* configure CS1 (ST16552 / CHAN A) */
sysOutLong((membaseCsr + P9030_LAS1BA), 0x00400001); /* enable space base */
sysOutLong((membaseCsr + P9030_LAS1RR), 0x0FFFFF00); /* 256 byte */
sysOutLong((membaseCsr + P9030_LAS1BRD), 0x55122900); /* 4 wait states */
sysOutLong((membaseCsr + P9030_CS1BASE), 0x00400081); /* enable 256 Byte */
/* remap CS1 (ST16552 / CHAN A) */
/* remap CS1 (ST16552 / CHAN A) */
pci_write_config_dword(devno, PCI_BASE_ADDRESS_3, ST16552_A_BASE);
/* configure CS2 (ST16552 / CHAN B) */
sysOutLong((membaseCsr + P9030_LAS2BA), 0x00800001); /* enable space base */
sysOutLong((membaseCsr + P9030_LAS2RR), 0x0FFFFF00); /* 256 byte */
sysOutLong((membaseCsr + P9030_LAS2BRD), 0x55122900); /* 4 wait states */
sysOutLong((membaseCsr + P9030_CS2BASE), 0x00800081); /* enable 256 Byte */
/* remap CS2 (ST16552 / CHAN B) */
pci_write_config_dword(devno, PCI_BASE_ADDRESS_4, ST16552_B_BASE);
/* configure CS3 (BCSR) */
sysOutLong((membaseCsr + P9030_LAS3BA), 0x00C00001); /* enable space base */
sysOutLong((membaseCsr + P9030_LAS3RR), 0x0FFFFF00); /* 256 byte */
sysOutLong((membaseCsr + P9030_LAS3BRD), 0x55357A80); /* 9 wait states */
sysOutLong((membaseCsr + P9030_CS3BASE), 0x00C00081); /* enable 256 Byte */
/* remap CS3 (DISPLAY and BCSR) */
pci_write_config_dword(devno, PCI_BASE_ADDRESS_5, BCSR_BASE);
}
void sysOutLong(ulong address, ulong value)
{
*(ulong*)address = cpu_to_le32(value);
}