upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
79 lines
3.0 KiB
79 lines
3.0 KiB
/*
|
|
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _LPC32XX_EMC_H
|
|
#define _LPC32XX_EMC_H
|
|
|
|
#include <asm/types.h>
|
|
|
|
/* EMC Registers */
|
|
struct emc_regs {
|
|
u32 ctrl; /* Controls operation of the EMC */
|
|
u32 status; /* Provides EMC status information */
|
|
u32 config; /* Configures operation of the EMC */
|
|
u32 reserved0[5];
|
|
u32 control; /* Controls dyn memory operation */
|
|
u32 refresh; /* Configures dyn memory refresh operation */
|
|
u32 read_config; /* Configures the dyn memory read strategy */
|
|
u32 reserved1;
|
|
u32 t_rp; /* Precharge command period */
|
|
u32 t_ras; /* Active to precharge command period */
|
|
u32 t_srex; /* Self-refresh exit time */
|
|
u32 reserved2[2];
|
|
u32 t_wr; /* Write recovery time */
|
|
u32 t_rc; /* Active to active command period */
|
|
u32 t_rfc; /* Auto-refresh period */
|
|
u32 t_xsr; /* Exit self-refresh to active command time */
|
|
u32 t_rrd; /* Active bank A to active bank B latency */
|
|
u32 t_mrd; /* Load mode register to active command time */
|
|
u32 t_cdlr; /* Last data in to read command time */
|
|
u32 reserved3[8];
|
|
u32 extended_wait; /* time for static memory rd/wr transfers */
|
|
u32 reserved4[31];
|
|
u32 config0; /* Configuration information for the SDRAM */
|
|
u32 rascas0; /* RAS and CAS latencies for the SDRAM */
|
|
u32 reserved5[6];
|
|
u32 config1; /* Configuration information for the SDRAM */
|
|
u32 rascas1; /* RAS and CAS latencies for the SDRAM */
|
|
u32 reserved6[54];
|
|
struct emc_stat_t {
|
|
u32 config; /* Static memory configuration */
|
|
u32 waitwen; /* Delay from chip select to write enable */
|
|
u32 waitoen; /* Delay to output enable */
|
|
u32 waitrd; /* Delay to a read access */
|
|
u32 waitpage; /* Delay for async page mode read */
|
|
u32 waitwr; /* Delay to a write access */
|
|
u32 waitturn; /* Number of bus turnaround cycles */
|
|
u32 reserved;
|
|
} stat[4];
|
|
u32 reserved7[96];
|
|
struct emc_ahb_t {
|
|
u32 control; /* Control register for AHB */
|
|
u32 status; /* Status register for AHB */
|
|
u32 timeout; /* Timeout register for AHB */
|
|
u32 reserved[5];
|
|
} ahb[5];
|
|
};
|
|
|
|
/* Static Memory Configuration Register bits */
|
|
#define EMC_STAT_CONFIG_WP (1 << 20)
|
|
#define EMC_STAT_CONFIG_EW (1 << 8)
|
|
#define EMC_STAT_CONFIG_PB (1 << 7)
|
|
#define EMC_STAT_CONFIG_PC (1 << 6)
|
|
#define EMC_STAT_CONFIG_PM (1 << 3)
|
|
#define EMC_STAT_CONFIG_32BIT (2 << 0)
|
|
#define EMC_STAT_CONFIG_16BIT (1 << 0)
|
|
#define EMC_STAT_CONFIG_8BIT (0 << 0)
|
|
|
|
/* Static Memory Delay Registers */
|
|
#define EMC_STAT_WAITWEN(n) (((n) - 1) & 0x0F)
|
|
#define EMC_STAT_WAITOEN(n) (((n) - 1) & 0x0F)
|
|
#define EMC_STAT_WAITRD(n) (((n) - 1) & 0x1F)
|
|
#define EMC_STAT_WAITPAGE(n) (((n) - 1) & 0x1F)
|
|
#define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F)
|
|
#define EMC_STAT_WAITTURN(n) (((n) - 1) & 0x0F)
|
|
|
|
#endif /* _LPC32XX_EMC_H */
|
|
|