upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
291 lines
7.8 KiB
291 lines
7.8 KiB
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments Incorporated.
|
|
* Aneesh V <aneesh@ti.com>
|
|
* Steve Sakoman <steve@sakoman.com>
|
|
*
|
|
* TI OMAP4 common configuration settings
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_OMAP4_COMMON_H
|
|
#define __CONFIG_OMAP4_COMMON_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP44XX 1 /* which is a 44XX */
|
|
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
|
|
#define CONFIG_OMAP_GPIO
|
|
#define CONFIG_OMAP_COMMON
|
|
|
|
/* Get CPU defs */
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
/* Display CPU and Board Info */
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_CMD_BOOTZ
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
* Total Size Environment - 128k
|
|
* Malloc - add 256k
|
|
*/
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
|
|
/* Vector Base */
|
|
#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* serial port - NS16550 compatible
|
|
*/
|
|
#define V_NS16550_CLK 48000000
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
#define CONFIG_CONS_INDEX 3
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
|
115200}
|
|
|
|
/* CPU */
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
/* I2C */
|
|
#define CONFIG_HARD_I2C 1
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 1
|
|
#define CONFIG_DRIVER_OMAP34XX_I2C 1
|
|
#define CONFIG_I2C_MULTI_BUS 1
|
|
|
|
/* TWL6030 */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_TWL6030_POWER 1
|
|
#endif
|
|
|
|
/* MMC */
|
|
#define CONFIG_GENERIC_MMC 1
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_OMAP_HSMMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
|
|
/* USB */
|
|
#define CONFIG_MUSB_UDC 1
|
|
#define CONFIG_USB_OMAP3 1
|
|
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE 1
|
|
#define CONFIG_USB_TTY 1
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
|
|
|
/* Flash */
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
|
|
/* commands to include */
|
|
#include <config_cmd_default.h>
|
|
|
|
/* Enabled commands */
|
|
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
|
#define CONFIG_CMD_MMC /* MMC support */
|
|
|
|
/* Disabled commands */
|
|
#undef CONFIG_CMD_NET
|
|
#undef CONFIG_CMD_NFS
|
|
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
|
|
/*
|
|
* Environment setup
|
|
*/
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_ENV_VARS_UBOOT_CONFIG
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_EXT4
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x82000000\0" \
|
|
"console=ttyO2,115200n8\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"fdtaddr=0x80f80000\0" \
|
|
"fdtfile=undefined\0" \
|
|
"bootpart=0:2\0" \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"vram=16M\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"mmcrootfstype=ext3 rootwait\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"vram=${vram} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
|
|
"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
|
|
"env import -t ${loadaddr} ${filesize}\0" \
|
|
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
|
|
"run mmcargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
"findfdt="\
|
|
"if test $board_name = sdp4430; then " \
|
|
"setenv fdtfile omap4-sdp.dtb; fi; " \
|
|
"if test $board_name = panda; then " \
|
|
"setenv fdtfile omap4-panda.dtb; fi;" \
|
|
"if test $board_name = panda-a4; then " \
|
|
"setenv fdtfile omap4-panda-a4.dtb; fi;" \
|
|
"if test $board_name = panda-es; then " \
|
|
"setenv fdtfile omap4-panda-es.dtb; fi;" \
|
|
"if test $fdtfile = undefined; then " \
|
|
"echo WARNING: Could not determine device tree to use; fi; \0" \
|
|
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run findfdt; " \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loadbootenv; then " \
|
|
"run importbootenv; " \
|
|
"fi;" \
|
|
"if test -n ${uenvcmd}; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"if run loadimage; then " \
|
|
"run loadfdt;" \
|
|
"run mmcboot; " \
|
|
"fi; " \
|
|
"fi"
|
|
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_CBSIZE 512
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
|
|
/*
|
|
* memtest setup
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
|
|
|
|
/* Default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x80000000
|
|
|
|
/* Use General purpose timer 1 */
|
|
#define CONFIG_SYS_TIMERBASE GPT2_BASE
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/*
|
|
* SDRAM Memory Map
|
|
* Even though we use two CS all the memory
|
|
* is mapped to one contiguous block
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#define CONFIG_SYS_L2_PL310 1
|
|
#define CONFIG_SYS_PL310_BASE 0x48242000
|
|
#endif
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/* Defines for SDRAM init */
|
|
#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
|
|
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
|
|
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
#endif
|
|
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_TEXT_BASE 0x40304350
|
|
#define CONFIG_SPL_MAX_SIZE (38 * 1024)
|
|
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
|
|
#define CONFIG_SPL_DISPLAY_PRINT
|
|
|
|
/*
|
|
* 64 bytes before this address should be set aside for u-boot.img's
|
|
* header. That is 80E7FFC0--0x80E80000 should not be used for any
|
|
* other needs.
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x80E80000
|
|
|
|
/*
|
|
* BSS and malloc area 64MB into memory to allow enough
|
|
* space for the kernel at the beginning of memory
|
|
*/
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x84000000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
|
|
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
|
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
|
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBDISK_SUPPORT
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SPL_FAT_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
|
|
|
#define CONFIG_SYS_THUMB_BUILD
|
|
|
|
#endif /* __CONFIG_OMAP4_COMMON_H */
|
|
|