upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/arm920t/imx/serial.c

201 lines
4.5 KiB

/*
* (c) 2004 Sascha Hauer <sascha@saschahauer.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
#if defined (CONFIG_IMX)
#include <asm/arch/imx-regs.h>
#ifndef CONFIG_IMX_SERIAL_NONE
#if defined CONFIG_IMX_SERIAL1
#define UART_BASE IMX_UART1_BASE
#elif defined CONFIG_IMX_SERIAL2
#define UART_BASE IMX_UART2_BASE
#else
#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
#endif
struct imx_serial {
volatile uint32_t urxd[16];
volatile uint32_t utxd[16];
volatile uint32_t ucr1;
volatile uint32_t ucr2;
volatile uint32_t ucr3;
volatile uint32_t ucr4;
volatile uint32_t ufcr;
volatile uint32_t usr1;
volatile uint32_t usr2;
volatile uint32_t uesc;
volatile uint32_t utim;
volatile uint32_t ubir;
volatile uint32_t ubmr;
volatile uint32_t ubrc;
volatile uint32_t bipr[4];
volatile uint32_t bmpr[4];
volatile uint32_t uts;
};
void serial_setbrg (void)
{
serial_init();
}
extern void imx_gpio_mode(int gpio_mode);
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*
*/
int serial_init (void)
{
volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
#ifdef CONFIG_IMX_SERIAL1
imx_gpio_mode(PC11_PF_UART1_TXD);
imx_gpio_mode(PC12_PF_UART1_RXD);
#else
imx_gpio_mode(PB30_PF_UART2_TXD);
imx_gpio_mode(PB31_PF_UART2_RXD);
#endif
/* Disable UART */
base->ucr1 &= ~UCR1_UARTEN;
/* Set to default POR state */
base->ucr1 = 0x00000004;
base->ucr2 = 0x00000000;
base->ucr3 = 0x00000000;
base->ucr4 = 0x00008040;
base->uesc = 0x0000002B;
base->utim = 0x00000000;
base->ubir = 0x00000000;
base->ubmr = 0x00000000;
base->uts = 0x00000000;
/* Set clocks */
base->ucr4 |= UCR4_REF16;
/* Configure FIFOs */
base->ufcr = 0xa81;
/* Set the numerator value minus one of the BRM ratio */
base->ubir = (CONFIG_BAUDRATE / 100) - 1;
/* Set the denominator value minus one of the BRM ratio */
base->ubmr = 10000 - 1;
/* Set to 8N1 */
base->ucr2 &= ~UCR2_PREN;
base->ucr2 |= UCR2_WS;
base->ucr2 &= ~UCR2_STPB;
/* Ignore RTS */
base->ucr2 |= UCR2_IRTS;
/* Enable UART */
base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
/* Enable FIFOs */
base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
/* Clear status flags */
base->usr2 |= USR2_ADET |
USR2_DTRF |
USR2_IDLE |
USR2_IRINT |
USR2_WAKE |
USR2_RTSF |
USR2_BRCD |
USR2_ORE |
USR2_RDR;
/* Clear status flags */
base->usr1 |= USR1_PARITYERR |
USR1_RTSD |
USR1_ESCF |
USR1_FRAMERR |
USR1_AIRINT |
USR1_AWAKE;
return (0);
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is successful, the character read is
* written into its argument c.
*/
int serial_getc (void)
{
volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
unsigned char ch;
while(base->uts & UTS_RXEMPTY);
ch = (char)base->urxd[0];
return ch;
}
#ifdef CONFIG_HWFLOW
static int hwflow = 0; /* turned off by default */
int hwflow_onoff(int on)
{
}
#endif
/*
* Output a single byte to the serial port.
*/
void serial_putc (const char c)
{
volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
/* Wait for Tx FIFO not full */
while (base->uts & UTS_TXFULL);
base->utxd[0] = c;
/* If \n, also do \r */
if (c == '\n')
serial_putc ('\r');
}
/*
* Test whether a character is in the RX buffer
*/
int serial_tstc (void)
{
volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
/* If receive fifo is empty, return false */
if (base->uts & UTS_RXEMPTY)
return 0;
return 1;
}
void
serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
#endif /* CONFIG_IMX_SERIAL_NONE */
#endif /* defined CONFIG_IMX */