upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
581 lines
16 KiB
581 lines
16 KiB
/*
|
|
* (C) Copyright 2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <serial.h>
|
|
#include <stdio_dev.h>
|
|
#include <post.h>
|
|
#include <linux/compiler.h>
|
|
#include <errno.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct serial_device *serial_devices;
|
|
static struct serial_device *serial_current;
|
|
/*
|
|
* Table with supported baudrates (defined in config_xyz.h)
|
|
*/
|
|
static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
|
|
|
|
/**
|
|
* serial_null() - Void registration routine of a serial driver
|
|
*
|
|
* This routine implements a void registration routine of a serial
|
|
* driver. The registration routine of a particular driver is aliased
|
|
* to this empty function in case the driver is not compiled into
|
|
* U-Boot.
|
|
*/
|
|
static void serial_null(void)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* on_baudrate() - Update the actual baudrate when the env var changes
|
|
*
|
|
* This will check for a valid baudrate and only apply it if valid.
|
|
*/
|
|
static int on_baudrate(const char *name, const char *value, enum env_op op,
|
|
int flags)
|
|
{
|
|
int i;
|
|
int baudrate;
|
|
|
|
switch (op) {
|
|
case env_op_create:
|
|
case env_op_overwrite:
|
|
/*
|
|
* Switch to new baudrate if new baudrate is supported
|
|
*/
|
|
baudrate = simple_strtoul(value, NULL, 10);
|
|
|
|
/* Not actually changing */
|
|
if (gd->baudrate == baudrate)
|
|
return 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
|
|
if (baudrate == baudrate_table[i])
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(baudrate_table)) {
|
|
if ((flags & H_FORCE) == 0)
|
|
printf("## Baudrate %d bps not supported\n",
|
|
baudrate);
|
|
return 1;
|
|
}
|
|
if ((flags & H_INTERACTIVE) != 0) {
|
|
printf("## Switch baudrate to %d"
|
|
" bps and press ENTER ...\n", baudrate);
|
|
udelay(50000);
|
|
}
|
|
|
|
gd->baudrate = baudrate;
|
|
#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
|
|
gd->bd->bi_baudrate = baudrate;
|
|
#endif
|
|
|
|
serial_setbrg();
|
|
|
|
udelay(50000);
|
|
|
|
if ((flags & H_INTERACTIVE) != 0)
|
|
while (1) {
|
|
if (getc() == '\r')
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
case env_op_delete:
|
|
printf("## Baudrate may not be deleted\n");
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
|
|
|
|
/**
|
|
* serial_initfunc() - Forward declare of driver registration routine
|
|
* @name: Name of the real driver registration routine.
|
|
*
|
|
* This macro expands onto forward declaration of a driver registration
|
|
* routine, which is then used below in serial_initialize() function.
|
|
* The declaration is made weak and aliases to serial_null() so in case
|
|
* the driver is not compiled in, the function is still declared and can
|
|
* be used, but aliases to serial_null() and thus is optimized away.
|
|
*/
|
|
#define serial_initfunc(name) \
|
|
void name(void) \
|
|
__attribute__((weak, alias("serial_null")));
|
|
|
|
serial_initfunc(mpc8xx_serial_initialize);
|
|
serial_initfunc(ns16550_serial_initialize);
|
|
serial_initfunc(pxa_serial_initialize);
|
|
serial_initfunc(s3c24xx_serial_initialize);
|
|
serial_initfunc(s5p_serial_initialize);
|
|
serial_initfunc(zynq_serial_initalize);
|
|
serial_initfunc(bfin_serial_initialize);
|
|
serial_initfunc(bfin_jtag_initialize);
|
|
serial_initfunc(mpc512x_serial_initialize);
|
|
serial_initfunc(uartlite_serial_initialize);
|
|
serial_initfunc(au1x00_serial_initialize);
|
|
serial_initfunc(asc_serial_initialize);
|
|
serial_initfunc(jz_serial_initialize);
|
|
serial_initfunc(mpc5xx_serial_initialize);
|
|
serial_initfunc(mpc8260_scc_serial_initialize);
|
|
serial_initfunc(mpc8260_smc_serial_initialize);
|
|
serial_initfunc(mpc85xx_serial_initialize);
|
|
serial_initfunc(iop480_serial_initialize);
|
|
serial_initfunc(leon2_serial_initialize);
|
|
serial_initfunc(leon3_serial_initialize);
|
|
serial_initfunc(marvell_serial_initialize);
|
|
serial_initfunc(amirix_serial_initialize);
|
|
serial_initfunc(bmw_serial_initialize);
|
|
serial_initfunc(cogent_serial_initialize);
|
|
serial_initfunc(cpci750_serial_initialize);
|
|
serial_initfunc(evb64260_serial_initialize);
|
|
serial_initfunc(ml2_serial_initialize);
|
|
serial_initfunc(sconsole_serial_initialize);
|
|
serial_initfunc(p3mx_serial_initialize);
|
|
serial_initfunc(altera_jtag_serial_initialize);
|
|
serial_initfunc(altera_serial_initialize);
|
|
serial_initfunc(atmel_serial_initialize);
|
|
serial_initfunc(lpc32xx_serial_initialize);
|
|
serial_initfunc(mcf_serial_initialize);
|
|
serial_initfunc(oc_serial_initialize);
|
|
serial_initfunc(sandbox_serial_initialize);
|
|
serial_initfunc(clps7111_serial_initialize);
|
|
serial_initfunc(imx_serial_initialize);
|
|
serial_initfunc(ixp_serial_initialize);
|
|
serial_initfunc(ks8695_serial_initialize);
|
|
serial_initfunc(lh7a40x_serial_initialize);
|
|
serial_initfunc(max3100_serial_initialize);
|
|
serial_initfunc(mxc_serial_initialize);
|
|
serial_initfunc(pl01x_serial_initialize);
|
|
serial_initfunc(sa1100_serial_initialize);
|
|
serial_initfunc(sh_serial_initialize);
|
|
serial_initfunc(arm_dcc_initialize);
|
|
serial_initfunc(mxs_auart_initialize);
|
|
|
|
/**
|
|
* serial_register() - Register serial driver with serial driver core
|
|
* @dev: Pointer to the serial driver structure
|
|
*
|
|
* This function registers the serial driver supplied via @dev with
|
|
* serial driver core, thus making U-Boot aware of it and making it
|
|
* available for U-Boot to use. On platforms that still require manual
|
|
* relocation of constant variables, relocation of the supplied structure
|
|
* is performed.
|
|
*/
|
|
void serial_register(struct serial_device *dev)
|
|
{
|
|
#ifdef CONFIG_NEEDS_MANUAL_RELOC
|
|
if (dev->start)
|
|
dev->start += gd->reloc_off;
|
|
if (dev->stop)
|
|
dev->stop += gd->reloc_off;
|
|
if (dev->setbrg)
|
|
dev->setbrg += gd->reloc_off;
|
|
if (dev->getc)
|
|
dev->getc += gd->reloc_off;
|
|
if (dev->tstc)
|
|
dev->tstc += gd->reloc_off;
|
|
if (dev->putc)
|
|
dev->putc += gd->reloc_off;
|
|
if (dev->puts)
|
|
dev->puts += gd->reloc_off;
|
|
#endif
|
|
|
|
dev->next = serial_devices;
|
|
serial_devices = dev;
|
|
}
|
|
|
|
/**
|
|
* serial_initialize() - Register all compiled-in serial port drivers
|
|
*
|
|
* This function registers all serial port drivers that are compiled
|
|
* into the U-Boot binary with the serial core, thus making them
|
|
* available to U-Boot to use. Lastly, this function assigns a default
|
|
* serial port to the serial core. That serial port is then used as a
|
|
* default output.
|
|
*/
|
|
void serial_initialize(void)
|
|
{
|
|
mpc8xx_serial_initialize();
|
|
ns16550_serial_initialize();
|
|
pxa_serial_initialize();
|
|
s3c24xx_serial_initialize();
|
|
s5p_serial_initialize();
|
|
mpc512x_serial_initialize();
|
|
bfin_serial_initialize();
|
|
bfin_jtag_initialize();
|
|
uartlite_serial_initialize();
|
|
zynq_serial_initalize();
|
|
au1x00_serial_initialize();
|
|
asc_serial_initialize();
|
|
jz_serial_initialize();
|
|
mpc5xx_serial_initialize();
|
|
mpc8260_scc_serial_initialize();
|
|
mpc8260_smc_serial_initialize();
|
|
mpc85xx_serial_initialize();
|
|
iop480_serial_initialize();
|
|
leon2_serial_initialize();
|
|
leon3_serial_initialize();
|
|
marvell_serial_initialize();
|
|
amirix_serial_initialize();
|
|
bmw_serial_initialize();
|
|
cogent_serial_initialize();
|
|
cpci750_serial_initialize();
|
|
evb64260_serial_initialize();
|
|
ml2_serial_initialize();
|
|
sconsole_serial_initialize();
|
|
p3mx_serial_initialize();
|
|
altera_jtag_serial_initialize();
|
|
altera_serial_initialize();
|
|
atmel_serial_initialize();
|
|
lpc32xx_serial_initialize();
|
|
mcf_serial_initialize();
|
|
oc_serial_initialize();
|
|
sandbox_serial_initialize();
|
|
clps7111_serial_initialize();
|
|
imx_serial_initialize();
|
|
ixp_serial_initialize();
|
|
ks8695_serial_initialize();
|
|
lh7a40x_serial_initialize();
|
|
max3100_serial_initialize();
|
|
mxc_serial_initialize();
|
|
pl01x_serial_initialize();
|
|
sa1100_serial_initialize();
|
|
sh_serial_initialize();
|
|
arm_dcc_initialize();
|
|
mxs_auart_initialize();
|
|
|
|
serial_assign(default_serial_console()->name);
|
|
}
|
|
|
|
/**
|
|
* serial_stdio_init() - Register serial ports with STDIO core
|
|
*
|
|
* This function generates a proxy driver for each serial port driver.
|
|
* These proxy drivers then register with the STDIO core, making the
|
|
* serial drivers available as STDIO devices.
|
|
*/
|
|
void serial_stdio_init(void)
|
|
{
|
|
struct stdio_dev dev;
|
|
struct serial_device *s = serial_devices;
|
|
|
|
while (s) {
|
|
memset(&dev, 0, sizeof(dev));
|
|
|
|
strcpy(dev.name, s->name);
|
|
dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
|
|
|
|
dev.start = s->start;
|
|
dev.stop = s->stop;
|
|
dev.putc = s->putc;
|
|
dev.puts = s->puts;
|
|
dev.getc = s->getc;
|
|
dev.tstc = s->tstc;
|
|
|
|
stdio_register(&dev);
|
|
|
|
s = s->next;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* serial_assign() - Select the serial output device by name
|
|
* @name: Name of the serial driver to be used as default output
|
|
*
|
|
* This function configures the serial output multiplexing by
|
|
* selecting which serial device will be used as default. In case
|
|
* the STDIO "serial" device is selected as stdin/stdout/stderr,
|
|
* the serial device previously configured by this function will be
|
|
* used for the particular operation.
|
|
*
|
|
* Returns 0 on success, negative on error.
|
|
*/
|
|
int serial_assign(const char *name)
|
|
{
|
|
struct serial_device *s;
|
|
|
|
for (s = serial_devices; s; s = s->next) {
|
|
if (strcmp(s->name, name))
|
|
continue;
|
|
serial_current = s;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* serial_reinit_all() - Reinitialize all compiled-in serial ports
|
|
*
|
|
* This function reinitializes all serial ports that are compiled
|
|
* into U-Boot by calling their serial_start() functions.
|
|
*/
|
|
void serial_reinit_all(void)
|
|
{
|
|
struct serial_device *s;
|
|
|
|
for (s = serial_devices; s; s = s->next)
|
|
s->start();
|
|
}
|
|
|
|
/**
|
|
* get_current() - Return pointer to currently selected serial port
|
|
*
|
|
* This function returns a pointer to currently selected serial port.
|
|
* The currently selected serial port is altered by serial_assign()
|
|
* function.
|
|
*
|
|
* In case this function is called before relocation or before any serial
|
|
* port is configured, this function calls default_serial_console() to
|
|
* determine the serial port. Otherwise, the configured serial port is
|
|
* returned.
|
|
*
|
|
* Returns pointer to the currently selected serial port on success,
|
|
* NULL on error.
|
|
*/
|
|
static struct serial_device *get_current(void)
|
|
{
|
|
struct serial_device *dev;
|
|
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
dev = default_serial_console();
|
|
else if (!serial_current)
|
|
dev = default_serial_console();
|
|
else
|
|
dev = serial_current;
|
|
|
|
/* We must have a console device */
|
|
if (!dev) {
|
|
#ifdef CONFIG_SPL_BUILD
|
|
puts("Cannot find console\n");
|
|
hang();
|
|
#else
|
|
panic("Cannot find console\n");
|
|
#endif
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
/**
|
|
* serial_init() - Initialize currently selected serial port
|
|
*
|
|
* This function initializes the currently selected serial port. This
|
|
* usually involves setting up the registers of that particular port,
|
|
* enabling clock and such. This function uses the get_current() call
|
|
* to determine which port is selected.
|
|
*
|
|
* Returns 0 on success, negative on error.
|
|
*/
|
|
int serial_init(void)
|
|
{
|
|
return get_current()->start();
|
|
}
|
|
|
|
/**
|
|
* serial_setbrg() - Configure baud-rate of currently selected serial port
|
|
*
|
|
* This function configures the baud-rate of the currently selected
|
|
* serial port. The baud-rate is retrieved from global data within
|
|
* the serial port driver. This function uses the get_current() call
|
|
* to determine which port is selected.
|
|
*
|
|
* Returns 0 on success, negative on error.
|
|
*/
|
|
void serial_setbrg(void)
|
|
{
|
|
get_current()->setbrg();
|
|
}
|
|
|
|
/**
|
|
* serial_getc() - Read character from currently selected serial port
|
|
*
|
|
* This function retrieves a character from currently selected serial
|
|
* port. In case there is no character waiting on the serial port,
|
|
* this function will block and wait for the character to appear. This
|
|
* function uses the get_current() call to determine which port is
|
|
* selected.
|
|
*
|
|
* Returns the character on success, negative on error.
|
|
*/
|
|
int serial_getc(void)
|
|
{
|
|
return get_current()->getc();
|
|
}
|
|
|
|
/**
|
|
* serial_tstc() - Test if data is available on currently selected serial port
|
|
*
|
|
* This function tests if one or more characters are available on
|
|
* currently selected serial port. This function never blocks. This
|
|
* function uses the get_current() call to determine which port is
|
|
* selected.
|
|
*
|
|
* Returns positive if character is available, zero otherwise.
|
|
*/
|
|
int serial_tstc(void)
|
|
{
|
|
return get_current()->tstc();
|
|
}
|
|
|
|
/**
|
|
* serial_putc() - Output character via currently selected serial port
|
|
* @c: Single character to be output from the serial port.
|
|
*
|
|
* This function outputs a character via currently selected serial
|
|
* port. This character is passed to the serial port driver responsible
|
|
* for controlling the hardware. The hardware may still be in process
|
|
* of transmitting another character, therefore this function may block
|
|
* for a short amount of time. This function uses the get_current()
|
|
* call to determine which port is selected.
|
|
*/
|
|
void serial_putc(const char c)
|
|
{
|
|
get_current()->putc(c);
|
|
}
|
|
|
|
/**
|
|
* serial_puts() - Output string via currently selected serial port
|
|
* @s: Zero-terminated string to be output from the serial port.
|
|
*
|
|
* This function outputs a zero-terminated string via currently
|
|
* selected serial port. This function behaves as an accelerator
|
|
* in case the hardware can queue multiple characters for transfer.
|
|
* The whole string that is to be output is available to the function
|
|
* implementing the hardware manipulation. Transmitting the whole
|
|
* string may take some time, thus this function may block for some
|
|
* amount of time. This function uses the get_current() call to
|
|
* determine which port is selected.
|
|
*/
|
|
void serial_puts(const char *s)
|
|
{
|
|
get_current()->puts(s);
|
|
}
|
|
|
|
/**
|
|
* default_serial_puts() - Output string by calling serial_putc() in loop
|
|
* @s: Zero-terminated string to be output from the serial port.
|
|
*
|
|
* This function outputs a zero-terminated string by calling serial_putc()
|
|
* in a loop. Most drivers do not support queueing more than one byte for
|
|
* transfer, thus this function precisely implements their serial_puts().
|
|
*
|
|
* To optimize the number of get_current() calls, this function only
|
|
* calls get_current() once and then directly accesses the putc() call
|
|
* of the &struct serial_device .
|
|
*/
|
|
void default_serial_puts(const char *s)
|
|
{
|
|
struct serial_device *dev = get_current();
|
|
while (*s)
|
|
dev->putc(*s++);
|
|
}
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_UART
|
|
static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE;
|
|
|
|
/**
|
|
* uart_post_test() - Test the currently selected serial port using POST
|
|
* @flags: POST framework flags
|
|
*
|
|
* Do a loopback test of the currently selected serial port. This
|
|
* function is only useful in the context of the POST testing framwork.
|
|
* The serial port is firstly configured into loopback mode and then
|
|
* characters are sent through it.
|
|
*
|
|
* Returns 0 on success, value otherwise.
|
|
*/
|
|
/* Mark weak until post/cpu/.../uart.c migrate over */
|
|
__weak
|
|
int uart_post_test(int flags)
|
|
{
|
|
unsigned char c;
|
|
int ret, saved_baud, b;
|
|
struct serial_device *saved_dev, *s;
|
|
bd_t *bd = gd->bd;
|
|
|
|
/* Save current serial state */
|
|
ret = 0;
|
|
saved_dev = serial_current;
|
|
saved_baud = bd->bi_baudrate;
|
|
|
|
for (s = serial_devices; s; s = s->next) {
|
|
/* If this driver doesn't support loop back, skip it */
|
|
if (!s->loop)
|
|
continue;
|
|
|
|
/* Test the next device */
|
|
serial_current = s;
|
|
|
|
ret = serial_init();
|
|
if (ret)
|
|
goto done;
|
|
|
|
/* Consume anything that happens to be queued */
|
|
while (serial_tstc())
|
|
serial_getc();
|
|
|
|
/* Enable loop back */
|
|
s->loop(1);
|
|
|
|
/* Test every available baud rate */
|
|
for (b = 0; b < ARRAY_SIZE(bauds); ++b) {
|
|
bd->bi_baudrate = bauds[b];
|
|
serial_setbrg();
|
|
|
|
/*
|
|
* Stick to printable chars to avoid issues:
|
|
* - terminal corruption
|
|
* - serial program reacting to sequences and sending
|
|
* back random extra data
|
|
* - most serial drivers add in extra chars (like \r\n)
|
|
*/
|
|
for (c = 0x20; c < 0x7f; ++c) {
|
|
/* Send it out */
|
|
serial_putc(c);
|
|
|
|
/* Make sure it's the same one */
|
|
ret = (c != serial_getc());
|
|
if (ret) {
|
|
s->loop(0);
|
|
goto done;
|
|
}
|
|
|
|
/* Clean up the output in case it was sent */
|
|
serial_putc('\b');
|
|
ret = ('\b' != serial_getc());
|
|
if (ret) {
|
|
s->loop(0);
|
|
goto done;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable loop back */
|
|
s->loop(0);
|
|
|
|
/* XXX: There is no serial_stop() !? */
|
|
if (s->stop)
|
|
s->stop();
|
|
}
|
|
|
|
done:
|
|
/* Restore previous serial state */
|
|
serial_current = saved_dev;
|
|
bd->bi_baudrate = saved_baud;
|
|
serial_reinit_all();
|
|
serial_setbrg();
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|