upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/mucmc52.h

136 lines
3.8 KiB

/*
* (C) Copyright 2008-2009
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MUCMC52 1 /* MUCMC52 board */
#define CONFIG_HOSTNAME mucmc52
#include "manroland/common.h"
#include "manroland/mpc5200-common.h"
#define CONFIG_LAST_STAGE_INIT
/*
* Serial console configuration
*/
#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
#define CONFIG_CMD_PCI
/*
* Flash configuration
*/
#define CONFIG_SYS_MAX_FLASH_SECT 67
/*
* Environment settings
*/
#define CONFIG_ENV_SECT_SIZE 0x20000
/*
* Memory map
*/
#define CONFIG_SYS_STATUS1_BASE 0x80600200
#define CONFIG_SYS_STATUS2_BASE 0x80600300
#define CONFIG_SYS_PMI_UNI_BASE 0x80800000
#define CONFIG_SYS_PMI_BROAD_BASE 0x80810000
/*
* GPIO configuration
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0x8D550644
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00f00000
#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_SYS_BOOTCS_CFG 0x0004FB00
/* 8Mbit SRAM @0x80100000 */
#define CONFIG_SYS_CS1_SIZE 0x00100000
#define CONFIG_SYS_CS1_CFG 0x00019B00
/* FRAM 32Kbyte @0x80700000 */
#define CONFIG_SYS_CS2_START 0x80700000
#define CONFIG_SYS_CS2_SIZE 0x00008000
#define CONFIG_SYS_CS2_CFG 0x00019800
/* Display H1, Status Inputs, EPLD @0x80600000 */
#define CONFIG_SYS_CS3_START 0x80600000
#define CONFIG_SYS_CS3_SIZE 0x00100000
#define CONFIG_SYS_CS3_CFG 0x00019800
/* PMI Unicast 32Kbyte @0x80800000 */
#define CONFIG_SYS_CS6_START CONFIG_SYS_PMI_UNI_BASE
#define CONFIG_SYS_CS6_SIZE 0x00008000
#define CONFIG_SYS_CS6_CFG 0xFFFFF930
/* PMI Broadcast 32Kbyte @0x80810000 */
#define CONFIG_SYS_CS7_START CONFIG_SYS_PMI_BROAD_BASE
#define CONFIG_SYS_CS7_SIZE 0x00008000
#define CONFIG_SYS_CS7_CFG 0xFF00F930
/*-----------------------------------------------------------------------
* IDE/ATA stuff Supports IDE harddisk
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
* 0x50000000 - 0x50ffffff - PCI IO Space
*/
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
#define CONFIG_PCI_SCAN_SHOW 1
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_SYS_ISA_IO CONFIG_PCI_IO_BUS
/*---------------------------------------------------------------------*/
/* Display addresses */
/*---------------------------------------------------------------------*/
#define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
#define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30)
#endif /* __CONFIG_H */